Is the Sellstrom 32155 Faceshield Flip Window the right Shade 6 IR visor for oxy/acetylene cutting, brazing, and plasma work?

Short answer: If you run a torch, braze, or do light plasma cutting and already own (or plan to buy) a Sellstrom 380-series shield, yes — the 32155 is a Shade 6 IR flip visor that drops the right amount of UV/IR shade over your eyes for cutting, then flips up to a clear view between cuts. It is a component, not a complete head-to-toe rig, so confirm it goes onto a 380-series shield and remember a face shield is always secondary protection over safety glasses or goggles. For shade and standards background, read how to choose a face shield and the best face shields for welding, grinding and cutting guide.

Sellstrom 32155 Faceshield Flip Window Review (2026)

The Sellstrom 32155 is not a full face shield on its own — it is the Shade 6 IR flip window that turns a clear Sellstrom 380-series shield into a torch-cutting and brazing rig. The facts are specific: it is injection-molded polycarbonate, Shade 6 IR, intended for oxy/acetylene cutting, brazing and plasma cutting, and it meets ANSI Z87.1+ and CSA Z94.3 only when assembled with a Sellstrom 380-series face shield. That last clause is the whole story for compatibility — this visor is engineered to the curve and mount of the 380 system, so think of it the way you would a Fibre-Metal 4178IRUV3 IR/UV window for a Fibre-Metal crown, or a Jackson Safety 29104 window for Jackson headgear: the lens and the host system are a matched pair and you should never cross brands. Because the shade is fixed at 6, it covers oxy-fuel and brazing radiant heat but is not a substitute for a welding helmet on stick or MIG arcs. Browse the rest of the face shields collection and the welding category, and if you are weighing a fixed shade against an integrated combo, compare the Lincoln Electric K3753-1 OMNIShield Shade 3 and the Jackson Safety SRW14233 QUAD500 Shade 8 IR.

Editorial verdict — 4.1/5
For torch cutters and brazers running a Sellstrom 380-series shield, the 32155 is a sensible, standards-backed Shade 6 IR upgrade that flips out of the way between cuts — but it is a system-specific component, so its value is zero if you do not own the matching shield.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• Oxy/acetylene torch cutters who own a Sellstrom 380-series shield and want a flip-up Shade 6 IR window — see the welding/grinding/cutting best-of
• Brazers and silver-solder workers needing fixed Shade 6 radiant-heat protection over safety glasses
• Light plasma-cutting operators wanting IR shade plus impact-rated polycarbonate, compared against the Sellstrom 32152 plasma/flame shield
• Maintenance and fab-shop crews standardized on the Sellstrom DP4 / 380 platform who want to add a cutting visor
• Buyers refreshing a scratched IR window rather than replacing a whole shield — review the face shields collection
• Anyone confirming shade and standards before buying via how to choose a face shield

What the Sellstrom 32155 Shade 6 IR Flip Visor does well

Shade matched to the task

Shade 6 IR sits in the correct band for oxy-fuel cutting and brazing — dark enough to cut the UV/IR glare of the torch without making the cut line invisible. That is the same logic behind picking the right number in the welding, grinding and cutting guide, and it is why a fixed-shade torch visor beats a clear shield for this work.

Impact-rated lens material

The window is injection-molded polycarbonate, which exceeds acetate in ANSI Z87.1 high-impact testing and resists UV crazing — so you get heat-radiation shade and spatter/impact resistance in one lens, unlike a propionate splash visor such as the Honeywell 11390064.

Documented standards path

It meets ANSI Z87.1+ and CSA Z94.3 when assembled with a Sellstrom 380-series face shield. That is a concrete, verifiable claim — read what Z87+ means and ANSI Z87.1 explained so you understand exactly what the mark covers and what it does not.

Flip-front workflow

The flip window lets you drop the Shade 6 visor for the cut and flip it clear for marking, setup and inspection without taking the shield off — the same convenience you get from goggle-plus-flip combos like the Jackson Safety 21000 GPL and the Pyramex GG504TSHIELDIR5 Capstone.

System-engineered fit

Because it is preformed to the 380-series curve and mount, it seals cleanly against spatter and debris rather than fighting the shield — the same matched-pair benefit you see with Fibre-Metal 6750CL on FM400/500 crowns.

Where the Sellstrom 32155 Shade 6 IR Flip Visor falls short

It is a component, not a kit

This listing is the flip visor only — no headgear, no clear primary window. On its own it protects nobody. You need a Sellstrom 380-series host shield such as the Sellstrom 32152 plasma/flame shield or a DP4-platform shield, and you still need primary eyewear underneath.

Fixed Shade 6 has limits

Shade 6 is right for oxy-fuel cutting and brazing but too light for arc welding — stick, MIG and TIG need a helmet with a much higher shade. If your work spans arc processes, this visor is not your answer; check the welding category for the correct gear.

Strictly series-locked

It only meets its standards on a Sellstrom 380-series shield and will not fit Fibre-Metal, Jackson, MSA, 3M or Honeywell systems. If you run another brand, look at the Honeywell 4178IRUV5 IR/UV window for Fibre-Metal or the Fibre-Metal 4178IRUV3 Shade 3 window instead.

Polycarbonate wears

Slag, sparks and heat will eventually scratch and haze any polycarbonate IR visor. Plan to replace it on a cadence like any other consumable window — see the broader options in the face shields collection.

Sellstrom 32155 Shade 6 IR Flip Visor vs the competition

Compare prices on Amazon →Sellstrom 32155 Shade 6 IR Flip Visor on Amazon[Sellstrom 32152 Plasm

When to step up from the Sellstrom 32155 Shade 6 IR Flip Visor

If you do not already own a Sellstrom 380-series shield, stepping up to a complete unit makes more sense than buying this visor alone: the Sellstrom 32152 plasma/flame cutting shield gives you the host system in one purchase, while a self-contained ratchet rig like the Jackson Safety SRW14233 QUAD500 Shade 8 IR or the Lincoln Electric K3753-1 OMNIShield Shade 3 bundles shade, window and headgear together. If you want maximum coverage with a bionic-style wrap, look at the Honeywell Uvex Bionic and its full review. The 32155 is the right pick only when the 380-series host is already in your kit.

Category context

Face shields divide into three things, and knowing which you are buying prevents most mistakes: complete shields (window plus headgear, like the Jackson Safety SRW14233 QUAD500), replacement windows/visors (lens only — what the 32155 is), and headgear/crowns (the suspension, like the Fibre-Metal F300 headgear). Window material drives the hazard fit: polycarbonate for impact, PETG/propionate for chemical splash, and IR/shade-numbered windows like this Shade 6 visor for the radiant heat of torch cutting and brazing — see how to choose a face shield. Mount style is just as important as material: this is a flip-front window engineered to the Sellstrom 380-series, distinct from a speedy-loop mount like the Fibre-Metal F5400 or a ratchet-crown shield. And whatever you pick, a shield is secondary protection — OSHA and Z87.1 expect safety glasses or goggles underneath, as covered in the best face shields guide.

Total cost of ownership

Total cost of ownership for the 32155 is really about replacement cadence. A polycarbonate IR visor exposed to slag, sparks and heat will scratch and haze faster than a clear shop window, so budget to swap it as a consumable rather than expecting it to last the life of the shield — the same way you would replace a Jackson Safety 29104 window or a 3M 82600 polycarbonate window. The host headgear and 380-series crown last far longer, which is the upside of a replaceable-window system: you refresh the cheap part, not the whole rig. Because asin is null on this listing, there is no fixed price button — use the tagged Amazon search link and compare against complete shields in the face shields collection before deciding whether a visor swap or a new unit is the better spend.

Final verdict

Buy the Sellstrom 32155 if you cut with oxy/acetylene, braze, or do light plasma work and you already run a Sellstrom 380-series shield — it is a correctly-shaded, standards-backed Shade 6 IR flip window that flips clear between cuts and meets ANSI Z87.1+ and CSA Z94.3 on that host. Skip it if you do not own the 380 system (buy a complete shield like the Sellstrom 32152 or Jackson Safety SRW14233 QUAD500 instead), if you arc-weld (you need a helmet, not a Shade 6 visor), or if you run another brand's crown (look at the Fibre-Metal 4178IRUV3 or Honeywell 4178IRUV5). For background, start with how to choose a face shield and the welding/grinding/cutting guide, and remember to wear primary eyewear underneath.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

Sellstrom 32155 Shade 6 IR Flip Visor FAQ

Is the Sellstrom 32155 a complete face shield or just a window?

It is a flip window component, not a complete shield — there is no headgear or clear primary window in this listing. It is the Shade 6 IR visor that mounts onto a Sellstrom 380-series face shield. To get a working rig you need that host shield, such as the Sellstrom 32152 plasma/flame shield; see how to choose a face shield for the difference between shields, windows and headgear.

What shade is the Sellstrom 32155?

It is a fixed Shade 6 IR window. That shade is intended for oxy/acetylene cutting, brazing and plasma cutting, giving UV/IR protection without overshading the cut line. It is not adjustable, so if your work needs different shades you would compare options in the welding, grinding and cutting guide.

What systems is the 32155 compatible with?

It meets ANSI Z87.1+ and CSA Z94.3 only when assembled with a Sellstrom 380-series face shield — it is engineered to that series' curve and mount. It will not fit Fibre-Metal, Jackson, MSA, 3M or Honeywell systems. Compatibility is always system-specific, the same way a Jackson 29104 window fits Jackson headgear and nothing else.

Can I use the 32155 for arc welding?

No. Shade 6 is appropriate for oxy-fuel cutting and brazing, but stick, MIG and TIG arc welding produce far more intense radiation and require a welding helmet with a much higher shade. For arc work, look in the welding category rather than a Shade 6 flip visor.

Does a face shield replace safety glasses?

No — a face shield is always secondary protection. OSHA 29 CFR 1910.133 and ANSI Z87.1 expect primary eyewear (safety glasses or goggles) worn underneath the shield, because a shield can be lifted, flipped, or let particles in around the edges. The safety glasses vs face shields guide explains the layered approach.

What is the window made of?

Injection-molded polycarbonate. Polycarbonate exceeds acetate in ANSI Z87.1 high-impact testing and resists UV-induced surface crazing, so it pairs impact resistance with the Shade 6 IR tint. That makes it tougher under spatter than a propionate splash visor like the Honeywell 11390064.

How is this different from the Fibre-Metal 4178IRUV3?

Both are IR/UV flip-style windows, but they belong to different systems and shades: the 32155 is Shade 6 for the Sellstrom 380 series, while the Fibre-Metal 4178IRUV3 is a Shade 3 propionate window preformed for Fibre-Metal crowns. Pick the one that matches the headgear you already own — never cross brands.

What does the flip-front design do?

The flip window lets you drop the Shade 6 IR visor over your eyes for the cut, then flip it up to a clear view for marking, setup and inspection without removing the shield. It is the same workflow as goggle-plus-flip combos like the Jackson Safety 21000 GPL.

Does the 32155 meet ANSI Z87.1?

It meets ANSI Z87.1+ and CSA Z94.3 when assembled with a Sellstrom 380-series face shield. The standard applies to the assembled unit, not the loose visor, which is why the host shield matters. To understand the marking, read what Z87+ means and ANSI Z87.1 explained.

How often should I replace the IR window?

Treat it as a consumable. Slag, sparks and heat scratch and haze polycarbonate over time, so replace it when vision through the visor degrades — the same maintenance logic as any clear polycarbonate window. Replacing the visor is far cheaper than replacing the whole 380-series shield.

Is the 32155 good for plasma cutting?

It is rated for plasma cutting alongside oxy/acetylene and brazing, with Shade 6 IR protection. For heavier or full-time plasma work you might prefer a complete cutting shield like the Sellstrom 32152 plasma/flame shield or a self-contained Jackson Safety SRW14233 QUAD500.

Will the 32155 fit my hard hat?

By itself, no — it is just the flip visor. Hard-hat mounting depends on the host Sellstrom 380-series shield and its adapter, not the window. If you need a hard-hat-mounted shield, look at complete units in the face shields collection and pair with your hard hat.

Can I use the 32155 over my prescription glasses?

The flip window itself does not contact your face — it sits on the 380-series shield. You can wear prescription safety glasses or goggles underneath as your primary protection, which is exactly how a shield should be layered. Confirm the assembled shield clears your frames.

What if I run a Jackson or MSA system instead of Sellstrom?

Then the 32155 is not for you — it only fits and certifies on the Sellstrom 380 series. For a Jackson system look at the Jackson Safety 29104 window, and for an MSA V-Gard system look at the MSA V-Gard visors. Matching the window to the host brand is non-negotiable.

How does the 32155 compare to a complete cutting shield?

A complete shield bundles window, shade and headgear in one purchase, while the 32155 is just the visor and assumes you own the 380-series host. If you are starting from scratch, a complete unit like the Lincoln Electric K3753-1 OMNIShield or the Jackson Safety SRW14233 QUAD500 is usually the better value.

Why is there no price on this listing?

This product does not carry a fixed price button here; instead you reach it through a tagged Amazon search link, so pricing reflects the current marketplace listing. Compare it against complete shields and other windows in the face shields collection before deciding whether the visor swap or a new shield is the smarter spend.

Is Shade 6 enough for brazing?

Yes — Shade 6 is in the typical range for brazing and oxy-fuel cutting, blocking the UV/IR glare while keeping the joint visible. If your brazing is unusually bright or sustained, review shade selection in the welding/grinding/cutting guide and the best face shields guide.

What is the best overall use case for the 32155?

A torch cutter or brazer who already runs a Sellstrom 380-series shield and wants a flip-up Shade 6 IR window that drops for the cut and lifts clear for setup. In that scenario it is a clean, standards-backed upgrade; outside it, a complete shield or a different brand's IR window — such as the Honeywell 4178IRUV5 — is the right call.