🔍 Click to zoom
Fibre-Metal 6750CL Clear Face-Shield Window — Z87.1
$15.89
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the Fibre-Metal 6750CL, a clear propionate face-shield window. Editorial assessment by Steven Eaton, WC Safety editor, based on published Fibre-Metal/Honeywell specifica...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the Fibre-Metal 6750CL, a clear propionate face-shield window.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Fibre-Metal/Honeywell specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Fibre-Metal/Honeywell specifications and category fit. We did not laboratory-test this product.
The Fibre-Metal 6750CL is an ANSI Z87.1 basic-impact clear injection-molded propionate face-shield window preformed for a tight seal on Fibre-Metal FM400DC and FM500DC series dual-crown headgear — a replacement window (crown sold separately) and secondary protection worn over primary safety glasses or goggles.
CHECK PRICE ON AMAZON → SHOP FACE SHIELDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Fibre-Metal 6750CL is preformed for a tight crown seal
A flat window bent onto a generic carrier leaves gaps; a window shaped for the crown seals better. The 6750CL is preformed for a tight seal on the Fibre-Metal FM400DC and FM500DC dual crown — a clear injection-molded propionate window with full brow-to-chin coverage and side flanges, meeting ANSI Z87.1 basic impact for general industry. It is the window; the dual crown is sold separately. As face shields go, this is the crown-matched clear window pick, and the best face shields guide and the glasses vs face shields guide explain how it layers with primary eyewear. It seals to the crown for a better fit.
Safety first: a face shield is secondary protection — it must be worn over primary safety glasses or goggles, not instead of them. A chemical splash hazard also needs sealed D3 goggles under the shield to seal the eyes. This is the window only, so it requires a compatible FM400DC or FM500DC dual crown (sold separately) — confirm the crown compatibility and the Z87 marking on the listing. Retire the window when it is scratched enough to impair vision.
What the Fibre-Metal 6750CL listing documents
From the published specs: an ANSI Z87.1 basic-impact window; injection-molded propionate clear material; a shape preformed for the FM400DC/FM500DC dual crown; and full brow-to-chin coverage with side flanges. These are the listing's clear face shield window and propionate face shield visor credentials as a replacement face shield window. Confirm the crown model and Z87 marking on the listing.
How the Fibre-Metal 6750CL compares to other face and eye protection
For a Fibre-Metal replacement window, the Fibre-Metal 4178DGN; for a Bullard clear window, the Bullard BUD4118CL; for an ERB replacement window, the ERB 15151; for a complete shield with headgear, the 3M 8270 Deluxe; and for the goggle you wear under it, the 3M Centurion 454AF. The eye protection buyer's guide covers the range.
Choosing the right window and eye protection
Match the window, crown, and primary eyewear to the hazard. Browse the eye protection and safety goggles collections; for the standard, the ANSI Z87.1 guide; and for shield selection, the grinding and cutting shields guide and the best eye protection guide.
Where it fits by job and crew orders
The 6750CL suits general manufacturing, maintenance, and metalworking programs running Fibre-Metal FM400DC/FM500DC crowns that need clear propionate replacement windows — see the manufacturing eyewear guide and the oil and gas eyewear guide. Pair the window with the safety glasses or goggles it supplements, and keep the eyewear underneath clear — see the anti-fog eyewear collection and the anti-fog guide. Confirm the crown compatibility and Z87 marking on the listing, and retire the window when it is scratched. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Fibre-Metal 6750CL?
An ANSI Z87.1 basic-impact clear injection-molded propionate face-shield window preformed for a tight seal on Fibre-Metal FM400DC and FM500DC series dual-crown headgear.
Which headgear does it fit?
The listing states it is designed and preformed for a tight seal on the Fibre-Metal FM400DC and FM500DC series dual crown. Confirm your crown model on the listing before ordering.
Does it come with headgear?
No - the 6750CL is the window only. It mounts to a compatible Fibre-Metal dual crown, which is sold separately. Replacement windows keep the crown in service when the lens is scratched or degraded.
Is a face shield primary eye protection?
No - a face shield is secondary protection worn over primary safety glasses or goggles, not instead of them. It adds face, cheek, and jaw coverage that eyewear alone cannot provide.
What is it made of?
The listing states injection-molded propionate - a clear thermoplastic used for face-shield windows. Confirm the material and the exact Z87 marking on the listing.
What impact rating does it carry?
The listing states it meets ANSI Z87.1 basic-impact requirements for general industrial use, rated to ANSI Z87.1 and OSHA 1910.133 for impact and particle hazards. Confirm the exact Z87 marking on the listing.
Is it rated for chemical splash?
The 6750CL is described for general impact and particle hazards. For a chemical splash hazard, use a splash-rated shield and wear sealed D3 splash goggles under it; confirm the ratings on the listing.
What does it cover?
Full frontal face coverage from brow to below the chin, with side flanges or curved geometry providing lateral protection beyond the direct forward field.
Why is it preformed?
The window is preformed to seal tightly against the FM400DC and FM500DC dual crown, giving a better fit and coverage than a flat window bent onto a generic carrier.
How do I care for it?
Clean the window with lens-safe wipes, avoid abrasive cloths, and retire the window when it is scratched enough to impair vision, since a worn shield no longer protects as intended.
When should I replace the window?
Replace the window when it is scratched, cracked, or hazed enough to impair vision - keeping fresh windows on the crown maintains protection.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Fibre-Metal 6750CL Clear Face-Shield Window review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
FIBRE-METAL
Model / SKU
6750CL
Product Type
Face Shields
Price
$15.89 (Amazon)
Rating
3.9 / 5 — 2 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆3.9 / 5· 2 ratings on Amazon
★★☆☆☆
Probably better to buy locally.
Came nearly folded in half and it took nearly a week to get the bend out of enough so it would fit the head gear and not rest against my face.
Verified Purchaser · May 28, 20 · ✓ Amazon Verified Purchase
Showing 1 of 2 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Fibre-Metal 6750CL?
An ANSI Z87.1 basic-impact clear injection-molded propionate face-shield window preformed for a tight seal on Fibre-Metal FM400DC and FM500DC series dual-crown headgear.
Which headgear does it fit?
The listing states it is designed and preformed for a tight seal on the Fibre-Metal FM400DC and FM500DC series dual crown. Confirm your crown model on the listing before ordering.
Does it come with headgear?
No - the 6750CL is the window only. It mounts to a compatible Fibre-Metal dual crown, which is sold separately. Replacement windows keep the crown in service when the lens is scratched or degraded.
Is a face shield primary eye protection?
No - a face shield is secondary protection worn over primary safety glasses or goggles, not instead of them. It adds face, cheek, and jaw coverage that eyewear alone cannot provide.
What is it made of?
The listing states injection-molded propionate - a clear thermoplastic used for face-shield windows. Confirm the material and the exact Z87 marking on the listing.
What impact rating does it carry?
The listing states it meets ANSI Z87.1 basic-impact requirements for general industrial use, rated to ANSI Z87.1 and OSHA 1910.133 for impact and particle hazards. Confirm the exact Z87 marking on the listing.
Is it rated for chemical splash?
The 6750CL is described for general impact and particle hazards. For a chemical splash hazard, use a splash-rated shield and wear sealed D3 splash goggles under it; confirm the ratings on the listing.
What does it cover?
Full frontal face coverage from brow to below the chin, with side flanges or curved geometry providing lateral protection beyond the direct forward field.
Why is it preformed?
The window is preformed to seal tightly against the FM400DC and FM500DC dual crown, giving a better fit and coverage than a flat window bent onto a generic carrier.
How do I care for it?
Clean the window with lens-safe wipes, avoid abrasive cloths, and retire the window when it is scratched enough to impair vision, since a worn shield no longer protects as intended.
When should I replace the window?
Replace the window when it is scratched, cracked, or hazed enough to impair vision - keeping fresh windows on the crown maintains protection.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.