Anti Vibration Gloves (ISO 10819)

Which anti vibration gloves fit your tool and shift?

Short answer: anti vibration gloves earn the name only when a standard backs it, and all five listings here — the entire Ergodyne ProFlex AV line — state ANSI S2.73/ISO 10819 certification. The 9012 jackhammer glove carries full-length AVC padding for breakers and rammers; the 9002 and 9000 are the full-finger workhorses for grinders and impact wrenches; the lightweight 9003 keeps dexterity on finish tools; and the 9015F(x) adds TPR dorsal impact protection. Impact-only options live on impact resistant gloves, the wider category on hand protection.

Editor's pick — Ergodyne ProFlex 9002
The certified full-finger standard — ANSI S2.73/ISO 10819 vibration dampening in a glove you can wear all shift on grinders, impact tools and mowers. Read the full listing.

VIEW THE LISTING →   CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. This has no bearing on which products appear here or in what order.

Anti-Vibration Gloves for Power Tool and Heavy Equipment Operators

Anti-vibration gloves are designed to reduce the transmission of vibration from power tools, jackhammers, drills, grinders, and other vibrating equipment to the hands and arms of the operator. Prolonged, repeated exposure to hand-arm vibration (HAV) can cause hand-arm vibration syndrome (HAVS) — a progressive, irreversible condition affecting the nerves, blood vessels, and joints of the hand and arm. Anti-vibration gloves are a key element of HAV risk reduction programs alongside tool selection, technique training, and exposure time limits.

Anti-vibration gloves incorporate vibration-dampening padding in the palm and finger areas, typically using materials such as gel inserts, foam composites, or air bladder systems to attenuate vibration frequencies most harmful to human tissue. ISO 10819 is the international standard governing anti-vibration glove testing and performance claims — compliant gloves must demonstrate measurable vibration reduction across the frequency ranges most associated with HAVS development.

Applications and Tool Compatibility

Anti-vibration gloves are appropriate for operators of angle grinders, die grinders, rotary hammers, demolition hammers, chipping hammers, needle scalers, impact wrenches, and pneumatic chisels — any tool that transmits significant vibration to the operator's hands during use. They are widely used in construction, demolition, mining, oil and gas, shipbuilding, and metal fabrication industries where heavy vibrating equipment is a routine part of the work.

Beyond vibration reduction, anti-vibration gloves typically offer grip enhancement, cut resistance, and impact protection as secondary features. This multi-hazard protection makes them suitable as an everyday work glove in tool-intensive environments rather than a specialty item worn only when vibration concerns are highest.

Choosing Anti-Vibration Gloves

Fit is critical — a glove that is too loose will not maintain effective contact with the vibration-dampening material against the hand. Look for gloves with secure wrist closures, breathable back-of-hand material for extended wear comfort, and tactile sensitivity sufficient for tool control. Browse our anti-vibration glove selection for options from leading work glove brands suited to construction, industrial, and heavy equipment applications.

🔧 Free tool: Using grinders or breakers all day? Check your Hand-Arm Vibration exposure A(8).

All five models, matched to tools

The certification is the shelf’s whole point: ISO 10819 measures a glove’s vibration transmissibility at the palm, and gloves that fail it are padding theater. What no glove does is make an over-limit tool safe — vibration dampening buys margin inside a hand-arm vibration program of tool maintenance, work rotation and exposure time, not a pass to skip one.

Our methodology

All five members are Ergodyne ProFlex models and every one states its vibration standard in its own listing — the one shelf in this family where the premise is fully documented. The prior page carried a disposable-glove FAQ that described none of these products; it has been replaced. Hand-protection rules come from OSHA 29 CFR 1910.138 and rating context from NIOSH skin/hand exposure guidance. We do not test gloves and hold no safety certification.

Why trust this page

WC Safety is an independent review site with no products of its own — nothing here is stocked, warehoused or shipped by us. Purchase links go to Amazon and earn an affiliate commission at no extra cost to you; no manufacturer pays for placement, which is why this page quotes only the ratings each listing states and names the gaps where a listing states none.

Frequently Asked Questions

What does ISO 10819 / ANSI S2.73 certification actually mean?

It is the test standard for anti-vibration gloves: palm-transmitted vibration is measured against bare-hand baselines, and only gloves that dampen enough in the medium and high frequency ranges may carry the mark. All five listings here state it — padding without the mark is untested foam.

Do anti vibration gloves prevent hand-arm vibration syndrome?

They reduce one exposure input; they do not make a vibrating tool safe. HAVS prevention is a program — maintained tools, limited trigger time, rotation, warm hands — and certified gloves buy margin inside it. A glove that lets you double your trigger time has been misused.

Which glove here for jackhammer and breaker work?

The ProFlex 9012 — its listing states full-length AVC padding sized for the big percussive tools, where palm-only padding leaves fingers buzzing.

What is the TPR dorsal protection on the 9015F(x)?

Thermoplastic-rubber armor across the back of the hand — struck-by protection layered onto the vibration rating, for demolition and rigging work where both hazards arrive together.

Why does fit matter more on AV gloves than most?

Oversized AV gloves force a harder grip, and grip force increases transmitted vibration — the padding then works against you. Size from the listing charts; between sizes, go snug.

Can I wear anti vibration gloves in cold weather?

Yes, and you should — cold restricts circulation, which worsens vibration effects. The full-finger models here layer over thin liners; keeping hands warm is itself part of HAVS control.

Does OSHA set a vibration exposure limit?

No specific PEL — OSHA cites vibration hazards under the general duty clause while ACGIH TLVs and ISO 5349 supply the measurement framework most programs use. The glove standard (ISO 10819) is separate: it rates the glove, not the exposure.

How long do anti-vibration gloves last?

Until the padding compresses — squeeze the palm; when the AVC no longer springs back, dampening is gone even if the shell looks fine. Heavy percussive use shortens life fastest.

Are these gloves cut-rated too?

The listings here state vibration and (on the 9015F(x)) impact protection — none state an ANSI cut level, so this page does not claim one. Cut-rated work lives on the cut-resistant shelves.

Full-finger or fingerless for vibration work?

Every certified model here is full-finger — ISO 10819 testing covers the palm, but fingers carry their own vibration injury risk, and fingerless “AV” gloves give them nothing.

Do anti vibration gloves help with impact wrenches and grinders?

Yes — rotary and impact tools sit in the frequency ranges ISO 10819 tests. The 9002 and 9000 are the fit for that duty; save the 9012’s bulk for percussive tools that need it.

Can vibration dampening gloves be washed?

Follow each listing’s care note — chloroprene and knit shells generally tolerate mild wash, but machine drying degrades padding. Air-dry, and retire gloves whose padding has hardened.

Related Safety Gear & Guides

• Ergodyne ProFlex 9012 — Jackhammer Gloves with Full-Length AVC Padding (ANSI S2.73 / ISO 10819)
• Ergodyne ProFlex 9003 Vibration Dampening Gloves — Lightweight Fine-Knit, EN ISO 10819
• Ergodyne ProFlex 9002 Anti-Vibration Work Gloves — Full-Finger, ANSI S2.73 / ISO 10819
• Ergodyne ProFlex 9000 Anti-Vibration Gloves — ANSI S2.73 / ISO 10819 Certified
• Ergodyne ProFlex 9015F(x) Vibration Resistant Gloves — TPR Dorsal Impact, Dual Certified
• Impact-Resistant Gloves
• Cut-Resistant Gloves
• Disposable Gloves
• Anti Fog Safety Glasses
• Nitrile Gloves
• Latex Gloves
• Anti Vibration Gloves Guide
• Ergodyne Proflex 9015fx Anti Vibration Gloves Review
• Ergodyne Proflex 9000 Anti Vibration Gloves Review
• Ergodyne Proflex 9002 Anti Vibration Gloves Review
• SAS Safety 66518 Raven Nitrile Gloves Large Review
• Anti Fog Vs Anti Scratch Safety Glasses
• Anti Fog Safety Glasses Guide

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers publish, with the gaps in that record marked. Last reviewed July 2026.