Ergodyne ProFlex 9000 Anti-Vibration Gloves — ANSI S2.73 / ISO 10819 Certified
$33.87
Final price set by Amazon · may vary
Size: Medium
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 9000, certified anti-vibration gloves for sustained power-tool work. Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergo...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 9000, certified anti-vibration gloves for sustained power-tool work.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
The Ergodyne ProFlex 9000 is what separates a real anti-vibration glove from a padded one: certification. ANSI/ASA S2.73-2014 and ISO 10819:2013 measure vibration transmissibility at the palm, and this glove passes — with a chloroprene rubber pad that disperses tool buzz, a pre-curved cut that spares grip strength, and an open back that keeps it on the hand all shift.
CHECK PRICE ON AMAZON → SHOP ANTI-VIBRATION GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why certified anti-vibration gloves matter
Hand-arm vibration injury is a dose disease: hours of grinder, sander, and breaker time accumulate into numbness, white finger, and permanent grip loss. The market's answer is a wall of "padded" and gel gloves that feel soft in the package and transmit most of the frequency band that does the damage. Certification is how you tell the difference — ANSI S2.73/ISO 10819 put gloves on a shaker and measure what actually reaches the palm. That's the entire case for buying vibration dampening gloves with a standard number on the tag, and it's why the 9000 anchors our anti-vibration collection. The anti-vibration reference guide covers the standards and HAVS in depth.
Safety first: certified transmissibility is measured under laboratory grip conditions — real-world attenuation depends on fit, grip force, and the tool itself, so treat gloves as one control in a vibration program, not the whole program. Tool maintenance, sharp consumables, and limiting trigger time per shift reduce the dose at the source; gloves reduce what's left. Numbness or tingling that persists after work is a medical signal, not a nuisance.
What the listing documents
From the listing: certification to ANSI/ASA S2.73-2014 and ISO 10819:2013 for measured vibration transmissibility reduction across the palm; a chloroprene rubber padded palm that absorbs and cushions without excessive bulk; a pre-curved ergonomic design that follows natural hand curvature to cut grip fatigue; an open-back construction that vents heat and moisture for all-day wear; sizes Medium, Large, and X-Large. Lightweight is the operative word — as jackhammer gloves go, the 9000 protects without turning your hands into mittens.
Inside Ergodyne's anti-vibration lineup
The 9000 is the certified flagship; the family flexes around it. The ProFlex 9002 and 9003 vary the shell and coverage, the 9012 leans utility, and the 9015FX adds TPR dorsal impact armor for combined vibration-and-impact work. Compare by the same two questions every time: is it certified, and will you keep it on? A glove that vents and fits beats a thicker one that lives in a pocket.
Vibration resistant gloves vs impact gloves
Buyers regularly cross-shop the wrong shelf here. Impact gloves — the ProFlex 925FX, its waterproof 925WP sibling, the A7 cut-impact 7070, and the field in the impact collection — armor the back of the hand against strikes and pinch points. Vibration resistant gloves put certified damping under the palm against oscillation. Different physics, different standards, sometimes both needed on one site: run the cut-vs-impact explainer and the impact roundup for the other shelf, and the mechanics roundup plus the mechanics collection for general tool work — with cut-rated mechanics picks where edges enter the job.
Ownership and program fit
Fit is function: the pad must sit flat under your grip, snug without constricting — measure against Ergodyne's chart rather than guessing. Retire the pair when the palm pad compresses or splits; a crushed pad has lost the geometry its certification measured. Round out hand protection by hazard, not habit: cut-rated gloves for blades and edges (the complete cut guide maps levels), leather for abrasion, and the wider trade glove lineup for everything between. For crew-scale orders, quantity purchasing runs through a free Amazon Business account — the walkthrough is linked in our footer.
Anti-vibration gloves are selected against ISO 5349, which defines how hand-arm vibration exposure is measured and weighted — the standard a buyer actually needs and one that rarely appears on a product page. The glove attenuates at specific frequencies; it does not remove the exposure, and daily trigger time is still the controlling variable. Cut, abrasion and puncture performance is rated separately under ANSI/ISEA 105. Compare across anti-vibration gloves, cut resistant gloves.
Frequently asked questions
What is the Ergodyne ProFlex 9000?
A lightweight anti-vibration glove certified to ANSI/ASA S2.73-2014 and ISO 10819:2013, with a chloroprene rubber padded palm, pre-curved ergonomic cut, and breathable open back. Sizes Medium, Large, and X-Large.
Why does the ANSI/ISO certification matter?
Because 'padded' is a feeling and certification is a measurement. ANSI S2.73/ISO 10819 test a glove's vibration transmissibility at the palm against defined thresholds — a glove either passes or it doesn't. Uncertified gel gloves may feel cushioned while transmitting most of the vibration that matters.
What tools justify anti-vibration gloves?
Sustained-exposure vibrating tools: grinders, sanders, impact wrenches, demolition hammers, jackhammers, chainsaws, plate compactors. The longer the trigger time per shift, the stronger the case — vibration injury is a dose problem.
What is HAVS and do gloves prevent it?
Hand-arm vibration syndrome — progressive, permanent damage to nerves and blood vessels from vibrating tools (white finger, numbness, grip loss). Certified gloves reduce the dose at the palm; they are one control alongside tool selection, maintenance, and limiting trigger time, not a cure-all.
Why chloroprene rubber instead of gel?
The 9000's chloroprene rubber pad absorbs and disperses vibration across the palm without the bulk that thick gel inserts add. Bulk costs grip force — and squeezing harder to hold a slick tool feeds vibration back into the hand, defeating the pad.
What's the open back for?
Heat. Vibrating-tool work is long-duration work, and a full-coverage back turns gloves into ovens by mid-shift. The open-back design vents heat and moisture so the gloves stay on — protection that gets removed protects nothing.
How do these differ from impact-resistant gloves?
Different physics. Impact gloves put TPR bumpers on the knuckles against strikes and pinches; anti-vibration gloves put certified damping under the palm against oscillation. Some jobs need both properties, but the certifications and constructions are separate.
How should they fit?
Snug enough that the pad sits flat under your grip without folds, loose enough not to constrict circulation — tight gloves aggravate the same blood-flow issues vibration causes. The pre-curved cut should follow your relaxed hand.
How long do they last?
Retire them when the palm pad compresses, splits, or delaminates, or when the shell wears through — a crushed pad has lost the geometry that earned its certification. Inspect the palm monthly under heavy use.
Do they work with touchscreens?
The listing doesn't claim touchscreen compatibility, so plan on pulling a glove to use a phone. Keep tool-time gloves and phone-time habits separate.
What sizes are available?
Medium, Large, and X-Large per the listing. Measure around the knuckles and use Ergodyne's size chart — pad placement only works when the glove's palm lines up with yours.
How do I order for a full crew?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Ergodyne ProFlex 9000 Anti-Vibration Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Ergodyne
Model / SKU
9000-M
Product Type
Safety Gloves
Price
$30.29 (Amazon)
Rating
4.4 / 5 — 898 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.4 / 5· 898 ratings on Amazon
★★★★★
Great for Paleontology and Workshop Projects!
I use these for paleontology scribe work and workshop related mechanical tool tasks and they do a great job. They reduce vibrations enough that I can go longer periods without starting to feel the numbing feeling from vibrations. They have held up well over time and are comfortable to wear. My dexterity is enough to do my work and I would recommend these to others doing similar work.
Verified Purchaser · March 30, · ✓ Amazon Verified Purchase
★★★★★
Excellent anti vibration quality
Western sizing. (Thats always nice when they fit ). Excellent vibration reduction. Im really impressed and its helping heal the damage done without them! A little bulky but thats how they do their job. Very effective and kind on the hands. Would highly recommend.
Verified Purchaser · March 24, · ✓ Amazon Verified Purchase
★★★★☆
THESE GLOVES MAKE A DIFFERENCE.
I am a senior citizen by all reasonable measures. But I still mow my own lawn, do the edging and clip the bushes. The mower and the edger are both gas powered and generate a lot of vibration as does the electric powered clipper. In the last few years I found my hands would tingle and feel numb after doing the yard work. I began to look for something that might help and came across these. I have owned them for just over a year and a half (May of 2023) so have used them through most of a growing season.As I said up front, they have made a difference. Since I started using them the tingling in my hands has dramatically improved along with the numbness. It isn’t all gone but is a great deal better than before and has made keeping the yard more pleasant. There is some wear but they still look solid with no notable fraying or splits.A friend advised me they would last much longer if I ONLY used them to dampen vibrations from tools and not as a general work glove. That is what I have done and they don’t show enough wear to matter so far. I think the design might be more prone to damage if used on whatever task comes along. It seems to me that the part that absorbs vibration wouldn’t hold up well to hard edges or sharp items. But they do what they say they will. Less vibration, less discomfort, and a few more years of doing all the yard work myself. Let’s hear it for old people power!
Verified Purchaser · January 12 · ✓ Amazon Verified Purchase
★★★★★
Great gloves
I have had these gloves for about three months now and I use them at work for approximately 20 hours per week. I work in the finish department of a factory where we manufacture wind turbine blades and I wear these gloves when I use a 5" pneumatic random orbital sander and a 7" pneumatic disc grinder.I was worried about these gloves severely lessening my manual dexterity and they do but not enough to affect my job performance. After a handful of times to get the feel of it, I can change out sand paper discs and grinder discs without any problems.I was also worried about the durability of the foam palms and fingers because handling abrasives with foam usually eats it up in a heartbeat. Of course, I am careful with them when I have them on but, again, this hasn't affected my performance. After three months of regular moderate use, they show little wear but I can assume that I'll probably have to get new ones in another 6 months.The vibration mitigation isn't 100% but I never expected that anyway. I would say that they reduce vibration by over 50% though. More subjectively, my hands don't fall asleep anymore when I am sleeping or using a computer. (I have carpal tunnel in both wrists and tendonitis in both elbows).I recommend these gloves and I will continue to buy them.Update: I wore these gloves for 7 months before I quit that job to start a new one where these gloves are not necessary. At the end of 7 months there is a hole at the index finger tip big enough to fit my finger through but not big enough to really affect my work. I would still buy these gloves again.
Verified Purchaser · June 21, 2 · ✓ Amazon Verified Purchase
★★★★★
Great for vibrating tools.
Saw a review on Amazon and bought them. They work great for lawn mowers, weed whackers, hedge trimmers, Skills Saws (reciprocating saws) that vibrate so much, small chain saws and hand drills. Size is right on. I will probably get another pain simply because by the time they wear out, the gloves will be out of production. This is a problem with many products. When you look to replace them, they are gone.
Verified Purchaser · May 6, 202 · ✓ Amazon Verified Purchase
★★★☆☆
They work, but not well enough
I just ran a 6" random orbit sander for an hour with these gloves and my fingers went from feeling numb to feeling like they buzzed every time I put my fingertips together (with gloves off). Very odd sensation. It's mostly stopped now after 15 minutes but my fingers still feel odd and less sensitive than usual. They feel mostly normal after about 40 minutes.According to other reviewers these gloves are one of the best you can get but they still seem highly inadequate when you can't do a job for an hour without having to stop for another hour. I also worry about gradual cumulative damage even if you start and stop to limit the tingling. Look up "white finger syndrome" caused by prolonged vibration exposure - it's pretty serious.I found a Canadian government site that says "Anti-vibration gloves are made using a layer of viscoelastic material. Actual measurements have shown that such gloves have limited effectiveness in absorbing low-frequency vibration, the major contributor to vibration-related disorders. Therefore, they offer little protection against developing vibration-induced white finger syndrome."I've read pretty much the same thing on logger forums about chain saw use. Using ANSI/ISO certified gloves is better than doing nothing, but they don't replace the use of more expensive tools designed to vibrate less and with shock absorption incorporated into their handles. The threads also mention that holding tools a little more loosely can help, and adding soft rubber around handles of older tools can help. You could buy something like Tool Wrap ORTHEX Grip Kit, Visco Elastic Polymer Sheet but it doesn't mention having any certification as to effectiveness and it's pretty expensive. I tried using some 3/4" thick foam rubber I had laying around rubber banded over the handle of the sander and it helped significantly reduce the sensation of vibration, though it made the sander impossible to hold normally. It worked well enough to guide it when set to constant on and pressed down on a horizontal surface.I'll also mention that these gloves are bulky and majorly reduce dexterity, making small items nearly impossible to pick up (even something the thickness of an extension cord is hard to grab). I think any glove with enough padding to actually do much against vibration is going to have that problem. The black backs of the gloves are porous and keep hands cooler, but they also pick up splinters and wood dust like crazy.
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★★★
Great Glove for the job!
My go to glove for drilling barrier and jackhammering / chipping. Makes the vibrations significantly less.
Verified Purchaser · June 8, 20 · ✓ Amazon Verified Purchase
★★★★★
Great Anti-Vibration Gloves
This is my first pair of anti-vibration gloves so I didn't know what to expect. They are the bomb! During at the summer months, I cut grass and trim grass 8 hours a day on a campus. Historically, my fingers would vibrate when done working and cramp at night. I have used these gloves for 4 days straight and no more finger issues. I am ordering a pair for my uncle who chainsaws a lot and experiences same issues as me.The palm side of the glove is very thick so you can't operate your phone or work with small parts but who cares! Surprisingly cool on hot days. The mesh backside breathes well. These are worth every penny!
Verified Purchaser · May 24, 20 · ✓ Amazon Verified Purchase
★★★★☆
Work good
Very thick gloves. Can't use for delicate manipulation, but they work good otherwise.
Verified Purchaser · March 28, · ✓ Amazon Verified Purchase
★★★★☆
Cool, but fall apart quickly
I'm a young guy (24) who does landscaping. I'm in relatively good shape, and I exercise frequently. My resting heart rate is 60-65, so I thought it was safe to think my heart (and circulation) were pretty healthy.My main tools are a Honda commercial 21" mower, and an Echo string trimmer. Occasionally I'll use low-end commercial hedge trimmers, or a chain saw. I rarely wore gloves. When I did, they were cheap split-leather ones.The mower was well balanced enough, and operated at a certain RPM, that it did not bother my hands, even for extended uses periods. The trimmer was a different story though. Even years back, I could remember that if I used the trimmer for ~30 minutes or so, my fingers would develop this weird feeling like they were still vibrating when I stopped using the tool. If I touched 2 affected finger tips together, it would have a doubly weird feeling like using your fingers to mute a ringing bell or drum cymbal. Usually this would go away within a few minutes. I would typically use the mower for 40 minutes, use the trimmer for 15 mins, rest for 30 mins, and re-start at the next job site.This past summer, I started working longer days, and doing more work at each job site. It seems that the cumulative effect of the vibration irritation added up. Suddenly, the irritation started occurring much more rapidly, and it would take longer to settle down.Then it got really bad when, not having used power tools for hours, my arms would get pins and needles if I raised them above my head for even 10 seconds.I got extremely concerned when I would wake up in the middle of the night with the worse "fallen asleep" arm I'd ever experienced. It took 5-10 mins of swinging my arm around, massaging, etc for it to subside.I quickly became paranoid of permanent nerve damage. My doctor's helpful advice was "uh...use that tool less"I decided to look up anti-vibration gloves. I bought the pair on this page. They seemed well made, and looked and felt like they would do a lot. They do make it a bit harder to grasp objects (which I think is partially the indirect goal), but did not affect me much as my machinery has larger handles.Unfortunately, these gloves did not stop me from getting vibration irritation, although I would say they lessened it considerably.Makes me wonder about people like my father, who is 53y/o, who has been doing hardwood floors his entire life. Hours upon hours of using drum sander, belt sander, buffer, and other reciprocating tools...Within a week or two, I saw the pads on the fingers and outer palm start to separate from the bottom. I can't imagine these lasting an entire season (6-7 months) in my line of work. I was always hyper-conscious of avoiding abrasive surfaces while wearing the gloves, but they have developed a look as if someone was petting brick walls while wearing them... Also, the cuffs started to fray a bit, but that is minor.I'm now on the hunt for lower vibration tools, I suppose. Must be why all the guys who own the Honda 4-stroke trimmers are older :0
Verified Purchaser · November 3 · ✓ Amazon Verified Purchase
Showing 10 of 898 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Ergodyne ProFlex 9000?
A lightweight anti-vibration glove certified to ANSI/ASA S2.73-2014 and ISO 10819:2013, with a chloroprene rubber padded palm, pre-curved ergonomic cut, and breathable open back. Sizes Medium, Large, and X-Large.
Why does the ANSI/ISO certification matter?
Because 'padded' is a feeling and certification is a measurement. ANSI S2.73/ISO 10819 test a glove's vibration transmissibility at the palm against defined thresholds — a glove either passes or it doesn't. Uncertified gel gloves may feel cushioned while transmitting most of the vibration that matters.
What tools justify anti-vibration gloves?
Sustained-exposure vibrating tools: grinders, sanders, impact wrenches, demolition hammers, jackhammers, chainsaws, plate compactors. The longer the trigger time per shift, the stronger the case — vibration injury is a dose problem.
What is HAVS and do gloves prevent it?
Hand-arm vibration syndrome — progressive, permanent damage to nerves and blood vessels from vibrating tools (white finger, numbness, grip loss). Certified gloves reduce the dose at the palm; they are one control alongside tool selection, maintenance, and limiting trigger time, not a cure-all.
Why chloroprene rubber instead of gel?
The 9000's chloroprene rubber pad absorbs and disperses vibration across the palm without the bulk that thick gel inserts add. Bulk costs grip force — and squeezing harder to hold a slick tool feeds vibration back into the hand, defeating the pad.
What's the open back for?
Heat. Vibrating-tool work is long-duration work, and a full-coverage back turns gloves into ovens by mid-shift. The open-back design vents heat and moisture so the gloves stay on — protection that gets removed protects nothing.
How do these differ from impact-resistant gloves?
Different physics. Impact gloves put TPR bumpers on the knuckles against strikes and pinches; anti-vibration gloves put certified damping under the palm against oscillation. Some jobs need both properties, but the certifications and constructions are separate.
How should they fit?
Snug enough that the pad sits flat under your grip without folds, loose enough not to constrict circulation — tight gloves aggravate the same blood-flow issues vibration causes. The pre-curved cut should follow your relaxed hand.
How long do they last?
Retire them when the palm pad compresses, splits, or delaminates, or when the shell wears through — a crushed pad has lost the geometry that earned its certification. Inspect the palm monthly under heavy use.
Do they work with touchscreens?
The listing doesn't claim touchscreen compatibility, so plan on pulling a glove to use a phone. Keep tool-time gloves and phone-time habits separate.
What sizes are available?
Medium, Large, and X-Large per the listing. Measure around the knuckles and use Ergodyne's size chart — pad placement only works when the glove's palm lines up with yours.
How do I order for a full crew?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.