Ergodyne ProFlex 9012 Anti-Vibration Work Gloves
$44.48
Final price set by Amazon · may vary
Size: Small
Ergodyne ProFlex 9012 Anti-Vibration Work Gloves The Ergodyne ProFlex 9012 is a full-fingered anti-vibration work glove built for operators of vibrating power tools — grinders, jackhammers, chipping guns, and similar ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
Ergodyne ProFlex 9012 Anti-Vibration Work Gloves
The Ergodyne ProFlex 9012 is a full-fingered anti-vibration work glove built for operators of vibrating power tools — grinders, jackhammers, chipping guns, and similar equipment where HAVS (Hand-Arm Vibration Syndrome) risk is a concern. AVC (Anti-Vibration and Comfort) palm padding reduces transmitted vibration across the palm. A built-in wrist support with patented Open-Center Stay helps relieve repetitive motion discomfort without restricting hand movement.
Key Features
- ANSI/ISO Anti-Vibration Certified — Meets ANSI/ASA S2.73-2014/ISO 10819:2013 anti-vibration standard, which requires laboratory testing of vibration transmissibility across the palm.
- Full-Length AVC Palm Padding — Anti-Vibration and Comfort padding runs the full palm length, reducing transmitted vibration and cushioning impact from tool operation.
- Built-In Wrist Support — Integrated wrist brace with Open-Center Stay stabilizes the wrist without a rigid plate, aiding relief from repetitive motion fatigue.
- Gripping Palm — Textured palm material provides a secure, controlled grip on tool handles and workpieces in normal work conditions.
- Technical Hex Stretch Knit Back — Allows natural hand movement and improves ventilation on the dorsal side of the glove.
- Neoprene Knuckle Pad — Protects knuckles from impact without adding significant bulk to the finger profile.
- Reinforced Fingertips & Thumb Saddle — Abrasion-resistant reinforcement where wear occurs most during tool operation.
- Full Fingered — Provides dexterity and tactile feedback while maintaining full hand coverage.
Compliance
Certified to ANSI/ISEA 105-2016 (general purpose hand protection), ANSI/ASA S2.73-2014/ISO 10819:2013 (anti-vibration gloves — mechanical vibration transmissibility), and EN 388 (European mechanical risk protection standard). The ISO 10819 certification is the primary standard for anti-vibration gloves and requires measured reduction of vibration across a defined frequency range.
Available Sizes
Small · Medium · Large · X-Large · 2X-Large
Brand / Vendor
Ergodyne
Model / SKU
9012-S
Product Type
Safety Gloves
Price
$44.48 (Amazon)
Rating
4.4 / 5 — 10 reviews
Availability
✓ In Stock on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.4 / 5· 120 ratings on Amazon
★★★★★
You need if if you have tendonitis
Definitely cut the vibrations while using rotary hammer drill. This helped a lot with tendonitis in my hands aka handon-itis.
Verified Purchaser · November 9 · ✓ Amazon Verified Purchase
★★★★★
They work well
I wasn't sure what to expect, but it really does cut down on the vibration. You'll need to remove them to do anything else because it removes all dexterity, but that's what you're sacrificing. It does the job well.
Verified Purchaser · December 2 · ✓ Amazon Verified Purchase
★★★★☆
hard to put on, but works well
Overall these are good gloves, they soften vibrations quite well.I bought them to isolate the vibrations from my Makita orbital sander.The problem with these gloves is that the fit is very tight at the start and it's a bit hard to get your hand in. Once you get in the fit is pretty good, the hand doesn't move inside the glove and is relatively comfortable.
Verified Purchaser · July 9, 20 · ✓ Amazon Verified Purchase
★★★★★
Best gloves for Weed Whacking
I use these for weed whacking and it pretty much alleviates any wrist and finger pain from the vibration of the trimmer.
Verified Purchaser · May 15, 20 · ✓ Amazon Verified Purchase
★★★★★
Expensive but good
These are not for running a weed eater or mowing the lawn, they are fit things that will torque your wrist and have a lot of vibration. Like running augers or large diameter bits on a roto hammer, maybe heavy work with an impact wrench. They are warm to wear because it the antivibration material and they fit tight. I prefer the tighter fit to avoid blisters.
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★★★
Buena calidad y durabilidad
Verified Purchaser · April 24, · ✓ Amazon Verified Purchase
★★★☆☆
they work good for timber falling but in 3 days bolw out one finger each hand
great for pounden wedges
Verified Purchaser · August 1, · ✓ Amazon Verified Purchase
★★★★☆
Seem good, but hot to wear.
Work fine, but they are hot. Wouldn't want to wear during summer.
Verified Purchaser · March 20, · ✓ Amazon Verified Purchase
★★★★☆
Good for intended purpose, not the greatest gloves overall.
I do a lot of wood cutting by hand. You wield an 8 pound maul for a couple of hours every day and it starts to wear on the small bones and joints in your hands. These gloves absolutely absorb shock. I cannot comment on the medical benefit, but intuition would suggest the improvement in comfort correlates with improved bone and joint health. The gloves do fit a little tighter than most L size gloves on my hands. This is okay as I really don't want my hands sliding within the gloves. Using them on a 30 degree (F) day, my fingertips got a little cold. For anyone using an axe, a maul, or a sledge hammer, these gloves add good shock absorption. In combination with my Fiskars maul which has shock absorption built in, my hands are protected about as well as possible.
Verified Purchaser · December 1 · ✓ Amazon Verified Purchase
★★★★☆
Bulky but good function
My occupational therapist recommended these after hand surgery to help with hand pain during yard work, especially mowing. I’ve used them mowing and with the hedge trimmer. I would not be able to do anything with fine motor but it really helped for yard tools.
Verified Purchaser · July 16, 2 · ✓ Amazon Verified Purchase
Showing 10 of 120 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.