🔍 Click to zoom
ERB 15151 Replacement Face-Shield Window — Clear, Z87.1
$8.69
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the ERB 15151, a clear replacement face-shield window. Editorial assessment by Steven Eaton, WC Safety editor, based on published ERB specifications and category fit. We...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.3/5 — WC Safety Review of the ERB 15151, a clear replacement face-shield window.
Editorial assessment by Steven Eaton, WC Safety editor, based on published ERB specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published ERB specifications and category fit. We did not laboratory-test this product.
The ERB 15151 is an ANSI Z87.1 basic-impact clear replacement face-shield window that fits ERB E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers, letting a program keep existing headgear in service with a fresh lens — secondary protection worn over primary safety glasses or goggles.
CHECK PRICE ON AMAZON → SHOP FACE SHIELDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the ERB 15151 keeps existing headgear in service
Replacing a whole face shield when only the window wore out is waste — the headgear is fine. The 15151 is the fix: a hard-coated optical-grade clear replacement window that drops into ERB E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers, restoring a clear view without buying a new unit. It carries full brow-to-chin coverage with side flanges and meets ANSI Z87.1 basic impact for general industry. As face shields go, this is the carrier-specific replacement-window pick, and the best face shields guide and the glasses vs face shields guide explain how it layers with primary eyewear. It refreshes the shield, not the whole rig.
Safety first: a face shield is secondary protection — it must be worn over primary safety glasses or goggles, not instead of them. A chemical splash hazard also needs sealed D3 goggles under the shield to seal the eyes. This is a replacement window only — it requires a compatible ERB visor carrier (sold separately), so confirm your carrier model and the Z87 marking on the listing. Retire the window when it is scratched enough to impair vision.
What the ERB 15151 listing documents
From the published specs: an ANSI Z87.1 basic-impact replacement window; a hard-coated optical-grade clear lens; fitment for the E13-E20 and 5000 visor carriers; and full brow-to-chin coverage with side flanges. These are the listing's replacement face shield window and clear face shield visor credentials in an industrial face shield. Confirm the carrier model and Z87 marking on the listing.
How the ERB 15151 compares to other face and eye protection
For a Bullard clear window, the Bullard BUD4118CL; for a Fibre-Metal replacement window, the Fibre-Metal 4178DGN; for a complete shield with headgear, the 3M 8270 Deluxe; for a full-face shield with headgear, the Pyramex S1010; and for the goggle you wear under it, the Sellstrom S80225 Odyssey II. The eye protection buyer's guide covers the range.
Choosing the right window and eye protection
Match the window, carrier, and primary eyewear to the hazard. Browse the eye protection and safety goggles collections; for the standard, the ANSI Z87.1 guide; and for shield selection, the grinding and cutting shields guide and the best eye protection guide.
Where it fits by job and crew orders
The 15151 suits general manufacturing, maintenance, and assembly programs already running ERB visor carriers that need clear replacement windows — see the manufacturing eyewear guide and the landscaping eyewear guide. Pair the window with the safety glasses or goggles it supplements, and keep the eyewear underneath clear — see the anti-fog eyewear collection and the anti-fog guide. Confirm the carrier model and Z87 marking on the listing, and retire the window when it is scratched. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the ERB 15151?
An ANSI Z87.1 basic-impact clear replacement face-shield window that fits ERB E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers, letting a program keep existing headgear in service with a fresh lens.
Which headgear does it fit?
The listing states it fits the E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers. Confirm your specific carrier model on the listing before ordering.
Does it come with headgear?
No - the 15151 is a replacement lens window only. It mounts to a compatible ERB visor carrier, which is sold separately. Replacement lenses let you keep existing headgear when the lens is scratched or degraded.
Is a face shield primary eye protection?
No - a face shield is secondary protection worn over primary safety glasses or goggles, not instead of them. It adds face, cheek, and jaw coverage that eyewear alone cannot provide.
What impact rating does it carry?
The listing states it meets ANSI Z87.1 basic-impact requirements for general industrial use, rated to ANSI Z87.1 and OSHA 1910.133 for impact and particle hazards. Confirm the exact Z87 marking on the listing.
Is it rated for chemical splash?
The 15151 is described for general impact and particle hazards. For a chemical splash hazard, use a splash-rated shield and wear sealed D3 splash goggles under it; confirm the ratings on the listing.
What is it made of?
The listing states a hard-coated optical-grade lens window providing impact resistance and surface durability; confirm the exact material on the listing.
What does it cover?
Full frontal face coverage from brow to below the chin, with side flanges or curved geometry providing lateral protection beyond the direct forward field.
Why buy replacement windows?
Replacement lenses let you keep your existing headgear assembly in service rather than replacing the whole unit when the window becomes scratched or degraded, lowering cost and waste.
How do I care for it?
Clean the window with lens-safe wipes, avoid abrasive cloths, and retire the window when it is scratched enough to impair vision, since a worn shield no longer protects as intended.
How many come in an order?
The listing states a quantity of 1 per order; confirm the pack quantity on the listing before ordering for a crew.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed ERB 15151 Replacement Face-Shield Window review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
ERB
Model / SKU
15151
Product Type
Face Shields
Price
$8.69 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the ERB 15151?
An ANSI Z87.1 basic-impact clear replacement face-shield window that fits ERB E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers, letting a program keep existing headgear in service with a fresh lens.
Which headgear does it fit?
The listing states it fits the E13, E15, E16, E16R, E17, E18, E19, E20, and 5000 visor carriers. Confirm your specific carrier model on the listing before ordering.
Does it come with headgear?
No - the 15151 is a replacement lens window only. It mounts to a compatible ERB visor carrier, which is sold separately. Replacement lenses let you keep existing headgear when the lens is scratched or degraded.
Is a face shield primary eye protection?
No - a face shield is secondary protection worn over primary safety glasses or goggles, not instead of them. It adds face, cheek, and jaw coverage that eyewear alone cannot provide.
What impact rating does it carry?
The listing states it meets ANSI Z87.1 basic-impact requirements for general industrial use, rated to ANSI Z87.1 and OSHA 1910.133 for impact and particle hazards. Confirm the exact Z87 marking on the listing.
Is it rated for chemical splash?
The 15151 is described for general impact and particle hazards. For a chemical splash hazard, use a splash-rated shield and wear sealed D3 splash goggles under it; confirm the ratings on the listing.
What is it made of?
The listing states a hard-coated optical-grade lens window providing impact resistance and surface durability; confirm the exact material on the listing.
What does it cover?
Full frontal face coverage from brow to below the chin, with side flanges or curved geometry providing lateral protection beyond the direct forward field.
Why buy replacement windows?
Replacement lenses let you keep your existing headgear assembly in service rather than replacing the whole unit when the window becomes scratched or degraded, lowering cost and waste.
How do I care for it?
Clean the window with lens-safe wipes, avoid abrasive cloths, and retire the window when it is scratched enough to impair vision, since a worn shield no longer protects as intended.
How many come in an order?
The listing states a quantity of 1 per order; confirm the pack quantity on the listing before ordering for a crew.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.