Sellstrom 32155 Faceshield Flip Window Face Shield

Sellstrom 32155 Faceshield Flip Window Face Shield Review

Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.

The Sellstrom 32155 is an ANSI Z87.1-compliant flip-window component for torch cutting and brazing — it mounts on Sellstrom DP4-series shields and is not arc-welding protection. Constructed from impact-resistant polycarbonate, it provides full-face coverage from brow to below the chin — protecting the face, cheeks, and jaw from hazards that safety glasses and goggles cannot address alone. Polycarbonate Shade 5 IR visor for oxy/acetylene cutting and brazing (Sellstrom also lists plasma; OSHA 1910.133 requires shade 8+ for plasma arc cutting) - added protection from UV/IR rays.

Read the full Sellstrom 32155 Faceshield Flip Window Face Shield review →

Construction and Materials

The lens window is constructed from injection-molded polycarbonate, providing high impact resistance that exceeds acetate in ANSI Z87.1 high-impact testing, with strong resistance to UV-induced surface crazing. Meets ANSI Z87.1+ and CSA Z94.3 standards when assembled with Sellstrom DP4 series face shields. The lens window extends coverage across the full frontal face profile with side geometry providing lateral protection. Construction meets or exceeds ANSI Z87.1 high-velocity impact requirements.

Compliance and Ratings

Rated to ANSI Z87.1 and OSHA 1910.133 for eye and face protection in welding and thermal cutting operations. ANSI/ISEA Z87.1 governs occupational eye and face protective devices; OSHA 29 CFR 1910.133 mandates its use in workplaces with documented eye and face hazards. Additional ANSI Z49.1 compliance is required for welding; the lens shade must match the welding process and amperage per that standard. Measures 9.25" width by 4.375" height by 0.070" thick.

Performance

In welding environments, the shield protects against optical radiation, spatter, and slag. Confirm the shade number matches ANSI Z49.1 requirements for the specific welding process and amperage in use. Gloves, Eyewear, Ear Protection, Masks & Clothing. Maintaining lens cleanliness and replacing lenses when scratched preserves visibility quality for precision work.

Strengths

• Polycarbonate lens provides ANSI Z87.1-rated impact protection for welding applications
• Optical-grade lens maintains clarity without distortion at working distances
• Compatible with standard face shield headgear assemblies
• Adjustable headgear fits most adult head sizes
• Full-face coverage from brow to chin protects areas beyond eyewear reach
• Full-face coverage from brow to chin provides protection not achievable with safety glasses alone

Limitations

• Face shields do not seal the eye surround — safety glasses or welding helmets must be worn underneath in chemical splash and grinding environments per OSHA 1910.133
• Lens scratching from abrasive contact degrades clarity over time; replacement lenses should be sourced when transmission quality decreases
• One-size-fits-most headgear may not accommodate all head sizes or hard hat platforms; verify compatibility before crew-scale procurement

Recommended Use Cases

MIG, TIG, stick, and flux-core welding; torch cutting and brazing; plasma cutting; foundry operations with molten metal splash. Appropriate for any OSHA-regulated workplace where face and eye hazard assessments document a risk requiring face shield-level protection.

Verdict

The Sellstrom 32155 face shield delivers ANSI Z87.1-compliant protection for welding applications in a polycarbonate construction suited for industrial environments. Buyers should verify headgear compatibility and application requirements before crew-scale procurement. For the full range of face shields across brands and protection levels, or for paired eye protection — safety glasses and welding helmets — explore the WC Safety protective equipment range.

Where this sits against the alternatives is covered in amber vs clear lens safety glasses, anti fog safety glasses guide, anti fog vs anti scratch safety glasses, best face shields, best face shields for welding grinding and cutting.

To see what else meets the same specification, start with 3m safety glasses, 3m virtua safety glasses, anti fog safety glasses.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.