Jackson Safety 29104 Faceshield Window for Headgear — Case of 12

jackson safety 29104 faceshield window for headgear — what the listing actually specifies

Jackson Safety 29104 Faceshield Window for Jackson Safety Headgear Face Shield Review

Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.

The Jackson Safety 29104 is an ANSI Z87.1-compliant general-purpose impact and splash face shield. Built with optical-grade lens material, it provides full-face coverage from brow to below the chin line — protecting the face, cheeks, and jaw from hazards that safety glasses and goggles cannot address alone. This is a replacement window only — headgear sold separately. without additional accessories. Compatibility: Universal Pin Mount Window; Compatible with the Jackson Safety Hard Hat Interchange System; No special tools needed.

Construction and Materials

The window is economy PETG — confirm the Z87 marking on the unit providing impact resistance and surface durability. The headgear assembly includes an adjustable suspension that fits most adult head sizes and can be configured for standalone use or mounted over a hard hat. Material: Clear, PETG (thermoplastic polymer resin) window allows for maximum visible light transmission; w measures 15.5" width by 8" height by 0.040" thick. The lens window extends coverage across the full frontal face profile, with side flanges or curved geometry providing lateral protection beyond the direct forward field. The construction meets or exceeds ANSI Z87.1 high-velocity impact requirements.

Compliance and Ratings

Rated to ANSI Z87.1 and OSHA 1910.133 for chemical splash and liquid hazard environments. ANSI/ISEA Z87.1 is the governing standard for eye and face protective devices in U.S. workplaces; OSHA 29 CFR 1910.133 mandates its use in workplace environments where eye or face hazards exist. For compliance programs, face shields should be used as part of a layered eye and face protection strategy per OSHA PPE hierarchy requirements. Use: Affordable, disposable and recyclable face protection, protective eyewear should be worn under face shields at all times.

Performance

In chemical handling environments, full-face coverage extends protection below the chin line and to the peripheral face area — coverage that safety glasses and goggles alone do not provide. Face shields used with chemical hazards should be worn over appropriate eye protection (goggles or safety glasses) per OSHA guidelines, not as standalone protection. Availability: Case of 12 PETG face shield windows fit any Jackson Safety Headgear. Maintaining lens cleanliness and replacing lenses when scratched preserves visibility quality critical for precision work.

Strengths

• Hard-coated lens provides ANSI Z87.1 impact-rated protection for chemical splash applications
• Optical-grade lens material maintains visibility clarity without distortion at working distances
• Replacement window only — pair with Jackson headgear without separate accessory purchase
• Adjustable headgear fits most adult head sizes for crew-level deployment
• Full-face coverage from brow to below the chin protects areas not covered by eyewear alone
• Single-unit design simplifies inventory and procurement

Limitations

• Face shields do not provide complete eye protection as standalone devices against chemical splash or fine particle hazards — OSHA 1910.133 requires appropriate safety glasses or safety goggles underneath the face shield in chemical and grinding environments
• Disposable construction limits per-unit cost advantage to low-frequency applications — for daily use, a reusable polycarbonate face shield with replacement lenses is more cost-effective
• One-size-fits-most headgear may not accommodate all head sizes or hard hat combinations; verify compatibility with the helmet platform before crew-scale procurement

Recommended Use Cases

Chemical mixing and transfer operations; laboratory handling of acids, caustics, and solvents; pharmaceutical manufacturing; janitorial and cleaning with caustic products; paint spray operations. This face shield is appropriate for any OSHA-regulated workplace where face and eye hazard assessments document a risk requiring face shield-level protection.

Verdict

The Jackson Safety 29104 face shield delivers ANSI Z87.1-compliant protection for chemical splash applications in a hard-coated construction suited for industrial and occupational environments. Buyers should confirm the specific model matches their headgear platform and application requirements before crew-scale procurement. For alternative face shields options across brands and protection levels, or for paired eye protection — safety glasses and safety goggles — explore the full WC Safety protective equipment range.

If the decision is still open, the comparisons in amber vs clear lens safety glasses, anti fog safety glasses guide, anti fog vs anti scratch safety glasses, best face shields, best face shields for welding grinding and cutting narrow it down.

Alternatives at the same protection level are listed in 3m safety glasses, 3m virtua safety glasses, anti fog safety glasses.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.

Related standards and selection guidance: best foam lined safety glasses 2026, best safety glasses 2026, best safety glasses for construction workers, best safety glasses for electricians.

To see what else meets the same specification, start with bifocal safety glasses, clear lens safety glasses.

Researching this model? Read our detailed Jackson Safety 29104 Faceshield Window for review.

CHECK PRICE ON AMAZON →