MSA Economuff ear muffs (Multi-Position, NRR 24/23, 10061273) Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The MSA Economuff Multi-Position Ear Muffs — NRR 24 (Over-Head) / 23 (Behind-Head, Under-Chin), 10061273 is a earmuffs from MSA, listed on Amazon. This review restates what the product page documents, places it in its hearing protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

Editorial assessment by Steven Eaton, WC Safety editor, based on published MSA specifications and category fit. We did not laboratory-test this product.

The MSA Economuff (part 10061273) is a passive, multi-position ear muff built for industrial crews who can't always wear a standard over-the-head band. It carries an NRR of 24 dB worn over the head and NRR 23 dB worn behind the head or under the chin (ANSI S3.19), so a single SKU covers workers who need to clear a face shield, welding hood, hard hat brim, or bump cap. Switching positions takes seconds — the headband pivots without tools.

This is a non-electronic muff : there is no microphone amplification, sound restoration, or Bluetooth. Attenuation comes entirely from the sealed cups and foam cushions, which keeps the price and weight down and removes batteries from the maintenance list. For most steady industrial noise — grinders, blowers, compressed-air tools, plant floors — passive protection at this NRR is exactly what the job calls for. If your team needs to hear range commands or radios, compare the electronic ear muffs instead.

Where It Earns Its Slot

Where it earns its slot: Editorial assessment by Steven Eaton, WC Safety editor, based on published MSA specifications and category fit. We did not laboratory-test this product.. The rest of this review holds the listing to exactly that brief — limits, alternatives, and the ranked guides included.

Honest Limits

Its limits are the category's: protection exists only while the seal does, and label ratings are laboratory numbers. Plan the NRR 24 label at roughly 8.5 dB of field reduction under OSHA's subtract-7-and-halve estimate, and let your measured exposure — not the box — decide whether it is enough. Inspect and maintain per the maker's guidance; a degraded protector fails silently.

Pros and Cons

Alternatives in the Same Lane

• Howard Leight Laser Lite LL-1 Cordless Earplugs — NRR 32
• Howard Leight Maximum Max-1 Cordless Earplugs — NRR 33
• Howard Leight Quiet QD1 Cordless Earplugs, NRR 26 (Reusable
• Howard Leight Maximum Lite Cordless Earplugs, LPF-1 NRR 30 (
• Howard Leight X-TREME XTR-1 NRR 32 ear plugs (Uncorded, Disp
• Howard Leight TrustFit Pod Earplugs, NRR 28 Cordless Push-In
• Howard Leight FirmFit FF-1 Earplugs, NRR 30 Cordless Foam (F
• Howard Leight Multi Max MM-1 Cordless Earplugs — NRR 31
• 3M PELTOR Optime 105 H10A Ear Muffs - NRR 30 Over-the-Head H

Hearing Protection Guides

• Best Ear Plugs for Construction
• Best Ear Muffs for Construction
• When Do You Need Hearing Protection?
• Best Noise-Canceling Headsets
• Construction Site PPE Guide

Browse by Category

• Hearing Protection
• Ear Muffs
• Foam Ear Plugs
• Corded Ear Plugs
• Shooting Hearing Protection
• PPE Care & Accessories

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the Best Ear Plugs for Construction guide.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The MSA Economuff Multi-Position Ear Muffs — NRR 24 (Over-Head) / 23 (Behi does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

Is dual protection ever required?

When the derated exposure still clears 85 dBA: doubling up typically adds roughly 5 dB over the higher-rated device, which is how the loudest industrial work is actually covered. Measure first — dual protection is a numbers decision, not a comfort one.

How much of the NRR 24 label reaches the ear?

Plan on roughly 8.5 dB: OSHA's enforcement estimate subtracts 7 dB from the NRR 24 label and halves the remainder. Compare that figure against your measured 8-hour average — and where the result still exceeds 85 dBA, dual protection (plugs under muffs) takes over, not a higher label.

What should earmuff inspection focus on?

The cushions and the clamp: hardened or cracked cushions stop sealing, aging headbands lose clamp force, and glasses temples cost a few dB by breaking the seal line. Replace cushion kits on schedule and treat a slack band as retirement, not character.

What does the MSA Economuff Multi-Position Ear Muffs — NRR 24 (Over-Head) listing actually document?

Editorial assessment by Steven Eaton, WC Safety editor, based on published MSA specifications and category fit. We did not laboratory-test this product.…

What are the alternatives to the MSA Economuff Multi-Position Ear Muffs — NRR 24 (Over-Head) ?

The sibling earmuffs options linked in this review, ranked head-to-head in the hearing protection guides below — start with the buyer's guides for the field view.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Neighbouring references on this site: electronic vs passive ear muffs: which do you need?, 3m peltor h505b welding earmuffs nrr 22 behind the head, 3m peltor h6a/v optime 95 ear muffs — nrr 21 db, over-the-head, 3m peltor hi-viz h31p3e hard hat ear muffs (nrr 25), 3m peltor optime 98 h9p3e cap-mount ear muffs (nrr 25) for hard hats, and ear plugs vs ear muffs: which hearing protection do you need?.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.