🔍 Click to zoom
Werner C311100 DeCoil Shock Absorbing Lanyard — Single-Leg, 6 ft
$54.00
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Werner C311100 DeCoil, a compact single-leg lanyard with the DCELL Shock Pack. Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner spec...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Werner C311100 DeCoil, a compact single-leg lanyard with the DCELL Shock Pack.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner specifications and category fit. We did not laboratory-test this product.
The Werner C311100 DeCoil is a compact single-leg shock-absorbing lanyard built around Werner's DCELL Shock Pack, which uses a controlled tearing action to decelerate a fall gradually and limit maximum arresting force below 900 lb. It has a 6-ft length, snap hooks on both ends, a 1-inch polyester web, and a 130 to 310 lb capacity, and meets OSHA 1926.502 and ANSI Z359.13.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Werner C311100 DeCoil handles easily
A bulky web or rope lanyard tangles at the harness and gets in your way. Werner's DeCoil takes a different approach: a coil-style design that stays managed at the harness without the bulk, paired with the DCELL Shock Pack — a controlled tearing action that decelerates a fall gradually and keeps arrest force below 900 lb, in a lighter, more compact form than a traditional pouch. The C311100 is the fixed 6-ft single-leg baseline of the line. As lanyards go, this is the compact, easy-handling pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It keeps everyday tie-off tidy.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible ANSI Z359.11 full-body harness at the dorsal D-ring and an anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15). A single-leg lanyard leaves you unprotected during anchor transitions, so plan the work, and calculate fall clearance: free fall, the deployed shock-pack length, D-ring height, and a safety factor. The capacity is 130 to 310 lb and arrest force stays below 900 lb. Retire the lanyard after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the Werner C311100 listing documents
From the published specs: a single-leg design; a DCELL Shock Pack holding arrest force below 900 lb; snap hooks both ends; a 6-ft length; a 1-inch polyester web; a 130 to 310 lb capacity; and OSHA 1926.502 / ANSI Z359.13 compliance. These are true decoil lanyard credentials and a genuine single leg lanyard — a compact shock absorbing lanyard for everyday tie-off.
How the Werner C311100 compares to other lanyards
For the adjustable DeCoil, the Werner C311103; for the rebar-hook DeCoil, the Werner C311200; for the twin-leg DeCoil, the Werner C411100; for other single-legs, the FallTech 8259 or Safewaze FS560; and for the standard 3M, the 3M Protecta PRO Pack. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The C311100 suits construction and maintenance crews who want a compact, easy-to-handle single-leg lanyard for everyday tie-off — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Keep the worker-plus-tools weight in range, verify each anchor, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Werner C311100 DeCoil?
A compact single-leg shock-absorbing lanyard from Werner's DeCoil series built around the DCELL Shock Pack. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, snap hooks on both ends, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is the DCELL Shock Pack?
Unlike a traditional stitched tear-strip pouch, the DCELL Shock Pack uses a controlled tearing action to decelerate a fall gradually, limiting maximum arresting force below 900 lb in a lighter, more compact package.
What does the DeCoil coil-style design do?
The coil-style design stays managed at the harness without the bulk of traditional web or rope lanyards, so it is easier to handle and keeps the lanyard tidy while you work.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock pack to perform as designed.
What harness and anchor do I need?
Connect a snap hook to the dorsal D-ring of any ANSI Z359.11 full-body harness and the other to an anchor rated for 5,000 lb per OSHA 1926.502(d)(15). The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the shock pack, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
How is it different from the C311103?
Both are DeCoil single-leg lanyards; the C311100 is fixed 6 ft, while the C311103 is adjustable so you can shorten it to reduce clearance in tight spaces. Choose the C311100 as the straightforward fixed-length option.
How is it different from the C311200?
The C311100 uses a snap hook on the anchor end, while the C311200 uses a rebar hook for vertical rebar and pipe. Choose the C311100 for standard anchor connections.
What work is it for?
General construction and maintenance where a compact, easy-to-handle single-leg lanyard covers everyday single-anchor tie-off.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock pack is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, DCELL Shock Pack, stitching, and snap hooks before each use, and have a competent person perform documented periodic inspections per your fall-protection program.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Werner C311100 DeCoil Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Werner
Model / SKU
C311100
Product Type
Lanyard
Price
$54.00 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Werner C311100 DeCoil?
A compact single-leg shock-absorbing lanyard from Werner's DeCoil series built around the DCELL Shock Pack. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, snap hooks on both ends, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is the DCELL Shock Pack?
Unlike a traditional stitched tear-strip pouch, the DCELL Shock Pack uses a controlled tearing action to decelerate a fall gradually, limiting maximum arresting force below 900 lb in a lighter, more compact package.
What does the DeCoil coil-style design do?
The coil-style design stays managed at the harness without the bulk of traditional web or rope lanyards, so it is easier to handle and keeps the lanyard tidy while you work.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock pack to perform as designed.
What harness and anchor do I need?
Connect a snap hook to the dorsal D-ring of any ANSI Z359.11 full-body harness and the other to an anchor rated for 5,000 lb per OSHA 1926.502(d)(15). The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the shock pack, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
How is it different from the C311103?
Both are DeCoil single-leg lanyards; the C311100 is fixed 6 ft, while the C311103 is adjustable so you can shorten it to reduce clearance in tight spaces. Choose the C311100 as the straightforward fixed-length option.
How is it different from the C311200?
The C311100 uses a snap hook on the anchor end, while the C311200 uses a rebar hook for vertical rebar and pipe. Choose the C311100 for standard anchor connections.
What work is it for?
General construction and maintenance where a compact, easy-to-handle single-leg lanyard covers everyday single-anchor tie-off.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock pack is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, DCELL Shock Pack, stitching, and snap hooks before each use, and have a competent person perform documented periodic inspections per your fall-protection program.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.