🔍 Click to zoom
FallTech 8259 Internal Shock Absorbing Lanyard — Single-Leg, 6 ft
$51.80
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the FallTech 8259 Internal, a slim single-leg lanyard with a concealed absorber. Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech spec...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the FallTech 8259 Internal, a slim single-leg lanyard with a concealed absorber.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
The FallTech 8259 Internal Shock Absorbing Lanyard is a single-leg lanyard whose internal continuous-length absorber is sewn inside the webbing for a clean, snag-free profile. It has a 6-ft length, a 1-inch polyester web, snap hooks, and a 130 to 310 lb capacity, meets ANSI Z359.13 and OSHA 1926.502(d), and holds arrest force at 900 lbf or less.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the FallTech 8259 Internal keeps a low profile
An external shock pack is easy to spot but can catch on rebar, scaffolding, and tight structure. The 8259 sews the energy absorber inside the webbing instead, giving a slim, snag-resistant profile that moves through cluttered work more freely. It is a straightforward single-leg lanyard meeting ANSI Z359.13 and OSHA 1926.502(d), with the internal absorber holding arrest force below 900 lbf, in a 1-inch polyester web. As lanyards go, this is the snag-free single-leg pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It stays out of the way while it protects.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible full-body harness at the dorsal D-ring and an anchor rated for at least 5,000 lb. The concealed absorber is harder to inspect than an external pack, so follow FallTech's inspection procedure and retire it after any fall. Calculate fall clearance: free fall, the deployed absorber length, D-ring height, and a safety factor. Capacity is 130 to 310 lb and arrest force is held to 900 lbf or less. Confirm requirements with the OSHA 1926 fall protection guide.
What the FallTech 8259 Internal listing documents
From the published specs: a single-leg design; an internal continuous-length absorber; snap hooks; a 6-ft length; a 1-inch polyester web; a 130 to 310 lb capacity; an arrest force at or below 900 lbf; and ANSI Z359.13 / OSHA 1926.502(d) compliance. These are true internal shock lanyard credentials and a genuine single leg lanyard — a low-profile snag-free lanyard for tight structure.
How the FallTech 8259 Internal compares to other lanyards
For the Y-leg internal version, the FallTech 8259Y Y-Leg; for an easy-inspect pack, the FallTech ViewPack; for the heavyweight single-leg, the FallTech 8246 Heavyweight; for tie-back, the FallTech WrapTech; and for other internal single-legs, the Guardian 11200 or 3M Protecta PRO Pack. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The 8259 suits construction, roofing, and industrial crews working around tight or cluttered structure who want a snag-resistant single-leg lanyard — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Keep the worker-plus-tools weight in range, inspect the concealed absorber per FallTech's procedure, and retire it after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the FallTech 8259 Internal lanyard?
A single-leg shock-absorbing lanyard from FallTech with an internal continuous-length absorber sewn inside the webbing for a snag-free profile. It meets ANSI Z359.13 and OSHA 1926.502(d), with a 6-ft length, 1-inch polyester web, and a 130 to 310 lb capacity.
What is an internal shock absorber?
The energy-absorbing element is concealed inside the webbing rather than in an external pack, giving a slim, snag-resistant profile that is less likely to catch on structure while you work.
How does it limit arrest force?
The internal energy absorber deploys during a fall, extending to absorb kinetic energy while keeping arrest force below 900 lbf per ANSI Z359.13, reducing the load on the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the absorber to perform as designed.
What harness and anchor do I need?
Connect a snap hook to the dorsal D-ring of a compatible full-body harness and the other to a certified anchor rated for at least 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the internal absorber, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
How is it different from the ViewPack 8256?
Both are FallTech single-leg lanyards; the 8259 hides the absorber inside the webbing for a snag-free profile, while the 8256 ViewPack uses a clear external pack you can inspect at a glance. Choose the 8259 for a lower-profile lanyard.
How do I inspect a concealed absorber?
Follow FallTech's inspection procedure - look for the warning indicator or exposed core, check the stitching, and retire the lanyard if the absorber has deployed, even if the outer webbing looks intact.
What standards does it meet?
It complies with OSHA 29 CFR 1926.502(d) and OSHA 1910.140 and meets or exceeds ANSI/ASSE Z359.13-2013 for shock-absorbing lanyards, as the listing states.
What work is it for?
Construction, roofing, scaffolding, and industrial height work where a slim, snag-resistant single-leg lanyard suits tight or cluttered structure.
When must it be retired?
Retire the lanyard immediately after it arrests a fall, or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed FallTech 8259 Internal Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
FallTech
Model / SKU
8259
Product Type
Lanyard
Price
$51.80 (Amazon)
Rating
4.7 / 5 — 3 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★4.7 / 5· 3 ratings on Amazon
★★★★★
Life Saver
I find this item very nice, though I received a blue one, I dint think it has anything to do with quality or what I ordered, just a color. Though im not heavy enough really to activate it, it's still a lanyard and it's very well made and I would recommend and buy another! The hooks are well made and looks well attached to the cord.
Verified Purchaser · July 5, 20 · ✓ Amazon Verified Purchase
★★★★☆
Safety At It's Best
Fall Protection as you would hope to get when your life brings home the paycheck. Don't get cheap when your life is on the line. Feel very comfortable working with this on!
Verified Purchaser · August 21, · ✓ Amazon Verified Purchase
Showing 2 of 3 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the FallTech 8259 Internal lanyard?
A single-leg shock-absorbing lanyard from FallTech with an internal continuous-length absorber sewn inside the webbing for a snag-free profile. It meets ANSI Z359.13 and OSHA 1926.502(d), with a 6-ft length, 1-inch polyester web, and a 130 to 310 lb capacity.
What is an internal shock absorber?
The energy-absorbing element is concealed inside the webbing rather than in an external pack, giving a slim, snag-resistant profile that is less likely to catch on structure while you work.
How does it limit arrest force?
The internal energy absorber deploys during a fall, extending to absorb kinetic energy while keeping arrest force below 900 lbf per ANSI Z359.13, reducing the load on the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the absorber to perform as designed.
What harness and anchor do I need?
Connect a snap hook to the dorsal D-ring of a compatible full-body harness and the other to a certified anchor rated for at least 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the internal absorber, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
How is it different from the ViewPack 8256?
Both are FallTech single-leg lanyards; the 8259 hides the absorber inside the webbing for a snag-free profile, while the 8256 ViewPack uses a clear external pack you can inspect at a glance. Choose the 8259 for a lower-profile lanyard.
How do I inspect a concealed absorber?
Follow FallTech's inspection procedure - look for the warning indicator or exposed core, check the stitching, and retire the lanyard if the absorber has deployed, even if the outer webbing looks intact.
What standards does it meet?
It complies with OSHA 29 CFR 1926.502(d) and OSHA 1910.140 and meets or exceeds ANSI/ASSE Z359.13-2013 for shock-absorbing lanyards, as the listing states.
What work is it for?
Construction, roofing, scaffolding, and industrial height work where a slim, snag-resistant single-leg lanyard suits tight or cluttered structure.
When must it be retired?
Retire the lanyard immediately after it arrests a fall, or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.