🔍 Click to zoom
FallTech WrapTech Tie-Back Shock Absorbing Lanyard — 8241
$116.61
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the FallTech WrapTech 8241, a tie-back lanyard with a multi-directional carabiner. Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech sp...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the FallTech WrapTech 8241, a tie-back lanyard with a multi-directional carabiner.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
The FallTech WrapTech 8241 is a single-leg tie-back shock-absorbing lanyard with a WrapTech carabiner rated 5,000 lb in any direction, so it can wrap around beams, columns, or any structural member without a dedicated anchor. Its internal continuous-length shock absorber keeps arrest force at or below 900 lbf, and it meets ANSI Z359.13-2013 and OSHA 1926. It turns almost any solid structural member into a usable connection point.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the FallTech WrapTech turns structure into an anchor
Ordinary carabiners are rated only along their major axis, so wrapping one around a beam and loading it sideways is unsafe. The WrapTech carabiner solves that with a 5,000 lb rating in any direction, which is what makes safe tie-back around a column, beam, or structural member possible where no dedicated anchor exists. Its internal continuous-length energy absorber deploys in a fall to hold arrest force at or below 900 lbf, all in a compact 1-inch polyester lanyard that meets ANSI Z359.13-2013. As lanyards go, this is the wrap-anywhere pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It gives you a connection point where others cannot.
Safety first: this lanyard is only one component of a complete personal fall arrest system — it must be paired with a compatible full-body harness at the dorsal D-ring, and the wrap point or anchor must itself be adequate. The listed capacity is 130 to 310 lb, so the worker plus tools must fall in that range for the absorber to perform. Calculate total fall clearance before work — free fall, the deployed absorber length, D-ring height, and a safety factor — and retire the lanyard after any fall or visible damage. Confirm requirements with the OSHA 1926 fall protection guide.
What the FallTech WrapTech listing documents
From the published specs: a single-leg tie-back design; a WrapTech carabiner rated 5,000 lb in any direction; an internal continuous-length shock absorber; an arrest force at or below 900 lbf; 6 ft length; and ANSI Z359.13-2013 / OSHA 1926 compliance. These are true tie-back lanyard credentials and a genuine shock absorbing lanyard — a certified single leg lanyard for wrap-around connection.
How the FallTech WrapTech compares to other lanyards
For a 3M tie-back, the 3M Protecta PRO Tie-Back; for 100% tie-off, the twin-leg 3M Protecta PRO Twin-Leg or FallTech 8259Y; for a single-leg value option, the Guardian 01220 or Elk River NOPAC; and for a premium option, the Petzl Absorbica. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The WrapTech suits ironworkers, roofers, and industrial crews who need a connection where anchors are scarce — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Verify every wrap point is adequate, keep the worker-plus-tools weight in the rated range, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the FallTech WrapTech 8241?
A single-leg tie-back shock-absorbing lanyard from FallTech with a WrapTech carabiner rated 5,000 lb in any direction, so it can wrap around beams, columns, or any structural member without a dedicated anchor. It meets ANSI Z359.13-2013 and OSHA 1926.
What does the WrapTech carabiner do?
The WrapTech carabiner is rated to 5,000 lb in any direction, which allows tie-back around a structural member - most carabiners are only rated along their major axis, so a multi-directional rating is what makes safe wrap-around use possible.
How does the shock absorber work?
An internal, continuous-length energy absorber deploys during a fall, extending to absorb kinetic energy while keeping the arrest force at or below 900 lbf, which reduces the load on the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness do I need?
Connect the snap hook to the dorsal D-ring of a compatible full-body harness. The lanyard is one part of a complete system; the wrap point or anchor must also be adequate for fall arrest.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the energy absorber, D-ring height, and a safety factor. Too little clearance risks striking a lower level before the fall is arrested.
What is the webbing?
1-inch polyester webbing, which resists UV and abrasion for outdoor construction and industrial use over the lanyard's service life.
What work is it for?
Construction, roofing, scaffolding, and industrial height work where a tie-back connection is useful because dedicated anchors are not always available.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the energy absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, stitching, energy absorber, and carabiner before each use, and have a competent person perform documented periodic inspections per your program.
Is it for positioning?
No - it is a fall-arrest lanyard, not a positioning device. Use the right device for the task, since misusing fall-arrest gear for positioning can defeat its protection.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed FallTech WrapTech Tie-Back Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
FallTech
Model / SKU
8241
Product Type
Lanyard
Price
$116.61 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the FallTech WrapTech 8241?
A single-leg tie-back shock-absorbing lanyard from FallTech with a WrapTech carabiner rated 5,000 lb in any direction, so it can wrap around beams, columns, or any structural member without a dedicated anchor. It meets ANSI Z359.13-2013 and OSHA 1926.
What does the WrapTech carabiner do?
The WrapTech carabiner is rated to 5,000 lb in any direction, which allows tie-back around a structural member - most carabiners are only rated along their major axis, so a multi-directional rating is what makes safe wrap-around use possible.
How does the shock absorber work?
An internal, continuous-length energy absorber deploys during a fall, extending to absorb kinetic energy while keeping the arrest force at or below 900 lbf, which reduces the load on the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness do I need?
Connect the snap hook to the dorsal D-ring of a compatible full-body harness. The lanyard is one part of a complete system; the wrap point or anchor must also be adequate for fall arrest.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed length of the energy absorber, D-ring height, and a safety factor. Too little clearance risks striking a lower level before the fall is arrested.
What is the webbing?
1-inch polyester webbing, which resists UV and abrasion for outdoor construction and industrial use over the lanyard's service life.
What work is it for?
Construction, roofing, scaffolding, and industrial height work where a tie-back connection is useful because dedicated anchors are not always available.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the energy absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, stitching, energy absorber, and carabiner before each use, and have a competent person perform documented periodic inspections per your program.
Is it for positioning?
No - it is a fall-arrest lanyard, not a positioning device. Use the right device for the task, since misusing fall-arrest gear for positioning can defeat its protection.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.