🔍 Click to zoom
FallTech 8259Y Internal Y-Leg Shock Absorbing Lanyard — 100% Tie-Off
$110.96
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the FallTech 8259Y, a snag-free Y-leg lanyard with internal absorbers. Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the FallTech 8259Y, a snag-free Y-leg lanyard with internal absorbers.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
The FallTech 8259Y Internal Y-Leg Shock Absorbing Lanyard is a twin Y-leg 100% tie-off lanyard whose internal continuous-length absorbers are sewn inside each leg for a snag-free profile with continuous connection. It has 6-ft legs, a 1-inch polyester web, snap hooks, and a 130 to 310 lb capacity, meets ANSI Z359.13 and OSHA 1926, and holds arrest force at 900 lbf or less.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the FallTech 8259Y combines tie-off and low profile
A twin-leg lanyard keeps you connected through anchor transitions, but two external packs can snag on cluttered steel. The 8259Y gives you both advantages: the Y-leg design delivers true 100% tie-off, while internal absorbers sewn inside each leg keep the profile slim and snag-resistant. It meets ANSI Z359.13 and OSHA 1926, with each absorber holding arrest force below 900 lbf. It is the twin-leg counterpart to FallTech's single-leg 8259. As lanyards go, this is the snag-free tie-off pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It stays connected and out of the way.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible full-body harness at the dorsal D-ring and anchors rated for at least 5,000 lb. The twin legs give continuous connection, but the clearance math still applies to the arresting leg: calculate free fall, the deployed absorber length, D-ring height, and a safety factor. The concealed absorbers are harder to inspect than external packs, so follow FallTech's procedure. Capacity is 130 to 310 lb; retire after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the FallTech 8259Y listing documents
From the published specs: a twin Y-leg 100% tie-off design; an internal continuous-length absorber on each leg; snap hooks; 6-ft legs; a 1-inch polyester web; a 130 to 310 lb capacity; an arrest force at or below 900 lbf; and ANSI Z359.13 / OSHA 1926 compliance. These are true y-leg lanyard credentials and a genuine 100% tie-off lanyard — a snag-free internal shock lanyard for moving between anchors.
How the FallTech 8259Y compares to other lanyards
For the single-leg internal version, the FallTech 8259 Internal; for a heavyweight Y-leg, the FallTech 8247Y3 Ironman; for a dual-leg internal alternative, the Guardian 11202; for external-pack 100% tie-off, the Guardian 01230 or twin-leg 3M Protecta PRO Twin-Leg; and for a carabiner Y-leg, the Elk River Flex-NoPac Twin-Leg. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The 8259Y suits steel erectors, scaffolders, and construction crews who move between anchors and want a snag-resistant 100% tie-off lanyard — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Park the unused leg per FallTech's guidance, keep the weight in range, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the FallTech 8259Y?
A twin Y-leg 100% tie-off shock-absorbing lanyard from FallTech with an internal continuous-length absorber sewn inside each leg for a snag-free profile. It meets ANSI Z359.13 and OSHA 1926, with 6-ft legs, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is 100% tie-off?
With the Y-leg design, one leg stays clipped to the current anchor while you move the other to the next anchor before releasing the first - so you are never disconnected while moving on structure.
Why an internal absorber on a Y-leg?
Sewing the absorber inside each leg keeps the twin-leg lanyard slim and snag-resistant, so it is less likely to catch on structure than a design with two external packs - useful on cluttered steel and scaffold.
How does it limit arrest force?
The internal energy absorber on the arresting leg deploys during a fall, extending to absorb kinetic energy while keeping arrest force below 900 lbf per ANSI Z359.13, protecting the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the absorber to perform as designed.
How is it different from the single-leg 8259?
Both use FallTech's internal absorber; the 8259 is single-leg for stationary work, while the 8259Y adds a second leg for 100% tie-off when you move between anchors. Choose the 8259Y for continuous connection.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of a compatible full-body harness and each leg to a certified anchor rated for at least 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed absorber length, D-ring height, and a safety factor. The clearance math applies to whichever leg arrests the fall.
Can I clip both legs to one anchor?
Clip only the working leg during normal work; the second leg is for the transition between anchors. Follow FallTech's instructions on parking the unused leg.
When must it be retired?
Retire the lanyard immediately after it arrests a fall, or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, steel erection, scaffolding, and industrial height work where workers move between anchors and want a snag-resistant 100% tie-off lanyard.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed FallTech 8259Y Internal Y-Leg Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
FallTech
Model / SKU
8259Y
Product Type
Lanyard
Price
$110.96 (Amazon)
Rating
5.0 / 5 — 1 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★5.0 / 5· 1 ratings on Amazon
★★★★★
Great product!!!
Works great like it’s suppose to. Will continue to buy fall tech products. Length is perfect too.
Verified Purchaser · November 5 · ✓ Amazon Verified Purchase
Showing 1 of 1 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the FallTech 8259Y?
A twin Y-leg 100% tie-off shock-absorbing lanyard from FallTech with an internal continuous-length absorber sewn inside each leg for a snag-free profile. It meets ANSI Z359.13 and OSHA 1926, with 6-ft legs, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is 100% tie-off?
With the Y-leg design, one leg stays clipped to the current anchor while you move the other to the next anchor before releasing the first - so you are never disconnected while moving on structure.
Why an internal absorber on a Y-leg?
Sewing the absorber inside each leg keeps the twin-leg lanyard slim and snag-resistant, so it is less likely to catch on structure than a design with two external packs - useful on cluttered steel and scaffold.
How does it limit arrest force?
The internal energy absorber on the arresting leg deploys during a fall, extending to absorb kinetic energy while keeping arrest force below 900 lbf per ANSI Z359.13, protecting the worker and the anchor.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the absorber to perform as designed.
How is it different from the single-leg 8259?
Both use FallTech's internal absorber; the 8259 is single-leg for stationary work, while the 8259Y adds a second leg for 100% tie-off when you move between anchors. Choose the 8259Y for continuous connection.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of a compatible full-body harness and each leg to a certified anchor rated for at least 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed absorber length, D-ring height, and a safety factor. The clearance math applies to whichever leg arrests the fall.
Can I clip both legs to one anchor?
Clip only the working leg during normal work; the second leg is for the transition between anchors. Follow FallTech's instructions on parking the unused leg.
When must it be retired?
Retire the lanyard immediately after it arrests a fall, or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, steel erection, scaffolding, and industrial height work where workers move between anchors and want a snag-resistant 100% tie-off lanyard.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.