🔍 Click to zoom
FallTech Ironman Y-Leg Shock Absorbing Lanyard — 8247Y3, Rebar Hooks
$170.89
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the FallTech Ironman 8247Y3, a heavyweight Y-leg lanyard for workers over 310 lb. Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech spe...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the FallTech Ironman 8247Y3, a heavyweight Y-leg lanyard for workers over 310 lb.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published FallTech specifications and category fit. We did not laboratory-test this product.
The FallTech Ironman 8247Y3 is a heavyweight twin-leg Y shock-absorbing lanyard with rebar hooks, engineered for workers whose combined body and equipment weight exceeds 310 lb — a capacity standard lanyards are not tested or certified for. Its internal shock absorber holds arrest force at or below 900 lbf per ANSI Z359.13, with 100% tie-off and a 12-ft free-fall rating, in heavier webbing built for hard use.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the FallTech Ironman protects heavier workers
Most lanyards are certified only up to 310 lb of combined body and equipment weight — a real problem for larger workers or anyone carrying a heavy tool belt, because a standard lanyard is not tested for them. The Ironman closes that gap with heavier 1-5/8-inch tubular webbing and hardware rated for workers over 310 lb, while its internal shock absorber still holds arrest force to 900 lbf or less per ANSI Z359.13. Add a twin-leg Y for 100% tie-off and rebar hooks for concrete and steel, and it covers demanding heavyweight work. As lanyards go, this is the heavyweight-capacity pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It is the lanyard for workers standard gear leaves out.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible full-body harness rated for the worker's weight at the dorsal D-ring and anchors rated for at least 5,000 lb. Heavier workers and the 12-ft free-fall rating increase the fall clearance you must calculate: factor free fall, the deployed absorber length, D-ring height, and a safety factor before work. Standard lanyards are not certified above 310 lb, so match the capacity to the worker. Retire the lanyard after any fall, and confirm requirements with the OSHA 1926 fall protection guide.
What the FallTech Ironman listing documents
From the published specs: a heavyweight capacity over 310 lb; a twin-leg Y with 100% tie-off; an offset rebar hook plus snap hook; an internal shock absorber at or below 900 lbf; a 12-ft free-fall rating; and 1-5/8-inch tubular polyester webbing. These are true heavyweight lanyard credentials and a genuine twin leg lanyard — a certified rebar hook lanyard for heavier workers.
How the FallTech Ironman compares to other lanyards
For standard-capacity Y-leg 100% tie-off, the 3M Protecta PRO Twin-Leg or FallTech 8259Y; for tie-back, the FallTech WrapTech or 3M Protecta PRO Tie-Back; for single-leg, the internal Guardian 11200 or slim Elk River NoPac; and for a premium Y-leg, the Petzl Absorbica Y. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The Ironman suits heavier workers and those with heavy tool loads in construction, steel, and roofing who need certified capacity above 310 lb — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Match the harness capacity to the worker, recalculate clearance for the higher free-fall rating, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the FallTech Ironman 8247Y3?
A heavyweight twin-leg Y shock-absorbing lanyard with rebar hooks, from FallTech's Ironman series. It is engineered for workers whose combined body and equipment weight exceeds 310 lb, with 100% tie-off and ANSI Z359.13 compliance.
Who is the heavyweight rating for?
For workers whose combined body plus equipment weight exceeds 310 lb. Standard lanyards are not tested or certified for heavier users, so the Ironman's heavier webbing and hardware provide the required capacity while still limiting arrest force.
What is 100% tie-off?
With the twin-leg Y, one leg stays clipped to the current anchor while you clip the other to the next anchor before releasing the first - so you are never disconnected while moving between anchor points.
What are the hooks?
An offset #18 rebar hook and a snap hook, giving you a large-opening hook that clips over rebar and structural members plus a standard connector - useful across concrete and steel work.
What is the arrest force?
The internal continuous-length shock absorber limits maximum arresting force to 900 lbf or less per ANSI Z359.13, even at the heavyweight capacity, protecting the worker and the anchor during a fall.
What about the 12-ft free-fall rating?
The listing states an Ironman 12-ft free-fall rating, higher than a standard 6-ft free-fall lanyard. Higher free fall demands more fall clearance, so calculate total clearance carefully before work.
What harness and anchor do I need?
Connect the harness end to the dorsal D-ring of a compatible full-body harness rated for the worker's weight, and each leg to a certified anchor. The lanyard alone is not a complete system.
What is the webbing?
1-5/8-inch tubular polyester webbing, heavier than a standard lanyard's, which provides the strength for heavyweight use and durability in heavy-use environments.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall (up to the rated distance), the deployed absorber length, D-ring height, and a safety factor. Heavier workers and higher free fall increase the clearance needed.
What work is it for?
Construction, roofing, steel erection, and industrial height work for heavier workers or those carrying substantial tools and equipment who need certified capacity above 310 lb.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed FallTech Ironman Y-Leg Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
FallTech
Model / SKU
8247Y3
Product Type
Lanyard
Price
$170.89 (Amazon)
Rating
4.5 / 5 — 3 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.5 / 5· 3 ratings on Amazon
★★★★☆
Four Stars
OKay. Freight was Fast
Verified Purchaser · March 14, · ✓ Amazon Verified Purchase
Showing 1 of 3 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the FallTech Ironman 8247Y3?
A heavyweight twin-leg Y shock-absorbing lanyard with rebar hooks, from FallTech's Ironman series. It is engineered for workers whose combined body and equipment weight exceeds 310 lb, with 100% tie-off and ANSI Z359.13 compliance.
Who is the heavyweight rating for?
For workers whose combined body plus equipment weight exceeds 310 lb. Standard lanyards are not tested or certified for heavier users, so the Ironman's heavier webbing and hardware provide the required capacity while still limiting arrest force.
What is 100% tie-off?
With the twin-leg Y, one leg stays clipped to the current anchor while you clip the other to the next anchor before releasing the first - so you are never disconnected while moving between anchor points.
What are the hooks?
An offset #18 rebar hook and a snap hook, giving you a large-opening hook that clips over rebar and structural members plus a standard connector - useful across concrete and steel work.
What is the arrest force?
The internal continuous-length shock absorber limits maximum arresting force to 900 lbf or less per ANSI Z359.13, even at the heavyweight capacity, protecting the worker and the anchor during a fall.
What about the 12-ft free-fall rating?
The listing states an Ironman 12-ft free-fall rating, higher than a standard 6-ft free-fall lanyard. Higher free fall demands more fall clearance, so calculate total clearance carefully before work.
What harness and anchor do I need?
Connect the harness end to the dorsal D-ring of a compatible full-body harness rated for the worker's weight, and each leg to a certified anchor. The lanyard alone is not a complete system.
What is the webbing?
1-5/8-inch tubular polyester webbing, heavier than a standard lanyard's, which provides the strength for heavyweight use and durability in heavy-use environments.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall (up to the rated distance), the deployed absorber length, D-ring height, and a safety factor. Heavier workers and higher free fall increase the clearance needed.
What work is it for?
Construction, roofing, steel erection, and industrial height work for heavier workers or those carrying substantial tools and equipment who need certified capacity above 310 lb.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.