🔍 Click to zoom
Guardian 01230 Dual-Leg Shock Absorbing Lanyard — 100% Tie-Off
$107.26
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Guardian 01230, a dual-leg 100% tie-off lanyard with an inspectable external pack. Editorial assessment by Steven Eaton, WC Safety editor, based on published Guardia...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Guardian 01230, a dual-leg 100% tie-off lanyard with an inspectable external pack.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Guardian specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Guardian specifications and category fit. We did not laboratory-test this product.
The Guardian 01230 is a dual-leg 100% tie-off shock-absorbing lanyard with an external shock-absorber pack that limits arresting force to 900 lbf or less. It meets ANSI Z359.13-2013, OSHA 1926 Subpart M, and ANSI A10.32, with two anchor snap hooks and a 130 to 310 lb capacity, so you stay connected moving between anchors. It pairs continuous connection with a pack you can check at a glance.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Guardian 01230 keeps you connected on the move
A single-leg lanyard forces a dangerous gap every time you cross to a new anchor. The Guardian 01230 closes it with two legs: one stays clipped while you move the other to the next anchor, giving true 100% tie-off. It keeps Guardian's external shock-absorber pack that limits arrest force to 900 lbf or less and is easy to inspect for deployment, and it meets ANSI Z359.13-2013, OSHA 1926 Subpart M, and ANSI A10.32. It is the dual-leg partner to Guardian's single-leg 01220. As lanyards go, this is the connected-and-inspectable pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It is protection that never lets go while you move.
Safety first: the listing states this lanyard meets OSHA 29 CFR 1926.502(d) requirements as part of a complete personal fall arrest system — pair it with a compatible full-body harness at the dorsal D-ring and rated anchors, since the 5,000 lb tensile strength does not replace a properly rated anchor. The dual legs give continuous connection, but the clearance math still applies to the arresting leg: calculate free fall, the deployed absorber length, D-ring height, and a safety factor. Retire it after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the Guardian 01230 listing documents
From the published specs: a dual-leg 100% tie-off design; an external shock-absorber pack at or below 900 lbf; two anchor snap hooks; a 130 to 310 lb capacity; 5,000 lb tensile strength; and ANSI Z359.13-2013 / OSHA 1926 Subpart M / ANSI A10.32 compliance. These are true dual leg lanyard credentials and a genuine 100% tie-off lanyard — a certified shock absorbing lanyard for moving between anchors.
How the Guardian 01230 compares to other lanyards
For the single-leg external Guardian, the Guardian 01220; for an internal-absorber Guardian, the Guardian 11200; for other 100% tie-off, the 3M Protecta PRO Twin-Leg or heavyweight FallTech Ironman; and for an easy-inspect single-leg, the FallTech ViewPack. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The Guardian 01230 suits steel erectors, roofers, and construction crews who move between anchors and want an inspectable dual-leg lanyard — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Follow the manufacturer's guidance on the unused leg, keep the weight in range, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Guardian 01230?
A dual-leg 100% tie-off shock-absorbing lanyard from Guardian Fall Protection with an external shock-absorber pack that limits arresting force to 900 lbf or less. It meets ANSI Z359.13-2013, OSHA 1926 Subpart M, and ANSI A10.32.
What is 100% tie-off?
With the dual-leg design, one leg stays clipped to the current anchor while you clip the other leg to the next anchor before releasing the first - so you are never disconnected while moving between anchor points.
What does the external pack add?
The external shock-absorber pack limits arrest force to 900 lbf or less for a 220-lb test load and, being on the outside, is easy to see and inspect for prior deployment before every use.
What is the capacity?
The listing states a capacity range of 130 to 310 lb (59 to 141 kg) - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
How is it different from the 01220?
The 01230 is the dual-leg version of Guardian's single-leg 01220, adding a second leg for 100% tie-off. Choose the 01230 when you move between anchors and the 01220 for stationary single-anchor work.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of a compatible full-body harness and each leg to a certified anchor. The 5,000 lb tensile strength does not replace a properly rated anchor - the lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed absorber length, D-ring height, and a safety factor. The clearance math applies to whichever leg arrests the fall.
What standards does it meet?
It complies with OSHA 29 CFR 1926.502(d) personal fall arrest system requirements and meets or exceeds ANSI/ASSE Z359.13-2013 and ANSI A10.32-2012, as the listing states.
Can I clip both legs to one anchor?
Clip only the working leg during normal work; the second leg is for the transition between anchors. Follow the manufacturer's instructions on parking the unused leg.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the external pack will show it deployed - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, roofing, steel erection, and industrial height work where workers move between anchor points and need continuous connection with an easy-to-inspect pack.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Guardian 01230 Dual-Leg Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Guardian Fall Protection
Model / SKU
01230
Product Type
Lanyard
Price
$107.26 (Amazon)
Rating
4.6 / 5 — 15 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★4.6 / 5· 15 ratings on Amazon
★★★★★
Cheaper than what my company was going to charge me for an equally rated product.
It works and passes muster for the requirement of an Ironworker.
Verified Purchaser · July 29, 2 · ✓ Amazon Verified Purchase
★★★★☆
Four Stars
LOOKS GOOD, JUST HOPE I NEVER DEPLOY IT...YA KNOW WHAT I MEAN?
Verified Purchaser · October 26 · ✓ Amazon Verified Purchase
★★★★★
Rock Solid Fall Arrest
A rock-solid personal fall arrest for a harness- not a climbing belt. The two legs allow 100% connection as you ascent/descend. This is not a positioning lanyard, nor should it be used to hold, pull, tow, or secure anything. It is part of a fall arrest system of safety.
Verified Purchaser · August 9, · ✓ Amazon Verified Purchase
★★★★★
Seems fine
It hasn't dropped me on my head yet. If I fall and survive I'll report back.
Verified Purchaser · April 18, · ✓ Amazon Verified Purchase
★★★★★
This lanyard is very easy to untie like some Warrior of the pool to ...
This lanyard is very easy to untie like some Warrior of the pool to safety Clips to release the tie offer
Verified Purchaser · June 6, 20 · ✓ Amazon Verified Purchase
★★★★★
Lanyards
Easy process of ordering, shipment was sent within a few days of ordering and received in good shape at this end. Extremely pleased with service.
Verified Purchaser · January 30 · ✓ Amazon Verified Purchase
★★★★★
Five Stars
Just as described
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
Showing 7 of 15 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Guardian 01230?
A dual-leg 100% tie-off shock-absorbing lanyard from Guardian Fall Protection with an external shock-absorber pack that limits arresting force to 900 lbf or less. It meets ANSI Z359.13-2013, OSHA 1926 Subpart M, and ANSI A10.32.
What is 100% tie-off?
With the dual-leg design, one leg stays clipped to the current anchor while you clip the other leg to the next anchor before releasing the first - so you are never disconnected while moving between anchor points.
What does the external pack add?
The external shock-absorber pack limits arrest force to 900 lbf or less for a 220-lb test load and, being on the outside, is easy to see and inspect for prior deployment before every use.
What is the capacity?
The listing states a capacity range of 130 to 310 lb (59 to 141 kg) - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
How is it different from the 01220?
The 01230 is the dual-leg version of Guardian's single-leg 01220, adding a second leg for 100% tie-off. Choose the 01230 when you move between anchors and the 01220 for stationary single-anchor work.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of a compatible full-body harness and each leg to a certified anchor. The 5,000 lb tensile strength does not replace a properly rated anchor - the lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed absorber length, D-ring height, and a safety factor. The clearance math applies to whichever leg arrests the fall.
What standards does it meet?
It complies with OSHA 29 CFR 1926.502(d) personal fall arrest system requirements and meets or exceeds ANSI/ASSE Z359.13-2013 and ANSI A10.32-2012, as the listing states.
Can I clip both legs to one anchor?
Clip only the working leg during normal work; the second leg is for the transition between anchors. Follow the manufacturer's instructions on parking the unused leg.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the external pack will show it deployed - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, roofing, steel erection, and industrial height work where workers move between anchor points and need continuous connection with an easy-to-inspect pack.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.