🔍 Click to zoom
3M Protecta PRO Pack Shock Absorbing Lanyard — 1341001
$70.45
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the 3M Protecta PRO Pack 1341001, a compact, cost-effective single-leg lanyard. Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specificati...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the 3M Protecta PRO Pack 1341001, a compact, cost-effective single-leg lanyard.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and category fit. We did not laboratory-test this product.
The 3M Protecta PRO Pack 1341001 is a compact single-leg shock-absorbing lanyard from 3M's Protecta PRO Pack series, built for general construction, roofing, and elevated work at a professional price point. It meets OSHA 1926.502 and ANSI Z359.13, with snap hooks, a 6-ft length, a polyester web, and a 130 to 310 lb capacity, and the compact PRO Pack absorber limits arrest force well below the 1,800-lb OSHA limit.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the 3M Protecta PRO Pack is the crew workhorse
Not every job needs a specialty lanyard — most single-anchor work needs a dependable shock absorber at a price you can buy by the dozen. That is the PRO Pack 1341001: the compact, standard-absorber member of 3M's Protecta line, holding arrest force well below the 1,800-lb OSHA limit in a polyester web built for weather and chemicals. It is the baseline the specialty models branch from. As lanyards go, this is the cost-effective crew pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It does the core job reliably.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible ANSI Z359.11 full-body harness at the dorsal D-ring and an anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15). A single-leg lanyard means you are unprotected during anchor transitions, so plan the work, and calculate fall clearance: free fall, the roughly 3.5 ft deceleration distance, D-ring height, and a safety factor. The capacity is 130 to 310 lb. Retire the lanyard after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the 3M Protecta PRO Pack listing documents
From the published specs: a single-leg design; a compact PRO Pack shock absorber; snap hooks both ends; a 6-ft length; a polyester web; a 130 to 310 lb capacity; an arrest force below the 1,800-lb OSHA limit; a Red/Gray color; and OSHA 1926.502 / ANSI Z359.13 compliance. These are true shock absorbing lanyard credentials and a genuine single leg lanyard — a dependable construction lanyard for everyday tie-off.
How the 3M Protecta PRO Pack compares to other lanyards
For a controlled progressive stop, the 3M Protecta PRO-Stop; for an elastic web, the 3M Protecta PRO Stretch; for tie-back, the 3M Protecta PRO Tie-Back Adjustable; for an easy-inspect pack, the FallTech ViewPack; and for an external-pack alternative, the Guardian 01220 or internal Guardian 11200. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The PRO Pack 1341001 suits construction and roofing crews outfitting a whole team with a reliable single-leg lanyard — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Keep the worker-plus-tools weight in range, verify each anchor, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the 3M Protecta PRO Pack 1341001?
A compact single-leg shock-absorbing lanyard from 3M's Protecta PRO Pack series. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, polyester web, snap hooks, and a 130 to 310 lb capacity, built for general construction at a professional price point.
What does the PRO Pack absorber do?
The compact PRO Pack shock absorber deploys during a fall to limit the maximum arresting force to well below the 1,800-lb OSHA limit under 29 CFR 1926.502(d)(16)(iv), protecting the worker's harness and spine during an arrest.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness and anchor do I need?
Connect the harness end to the dorsal D-ring of an ANSI Z359.11 full-body harness and the anchor end to a certified anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15). The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, deceleration distance of roughly 3.5 ft, D-ring height, and a safety factor. Too little clearance risks striking a lower level before the lanyard arrests the fall.
What is the webbing made of?
A polyester web that resists UV, abrasion, and jobsite chemicals for outdoor construction and roofing over the lanyard's service life.
How is it different from the PRO-Stop 1340220?
Both are 3M Protecta single-leg lanyards; the 1341001 uses the standard compact PRO Pack absorber, while the 1340220 PRO-Stop uses progressive tubular webbing for a controlled stop. Choose the 1341001 for the straightforward, cost-effective PRO Pack.
What color is it?
The listing states the 1341001 ships in Red/Gray with a pre-deployment shock-absorber pack.
What work is it for?
General construction, roofing, and elevated work where reliable single-leg fall arrest is required at a professional price point across a crew.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, shock pack, stitching, and snap hooks before each use, and have a competent person perform documented periodic inspections per your fall-protection program.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
3M
Model / SKU
—
Product Type
Lanyard
Price
$70.45 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the 3M Protecta PRO Pack 1341001?
A compact single-leg shock-absorbing lanyard from 3M's Protecta PRO Pack series. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, polyester web, snap hooks, and a 130 to 310 lb capacity, built for general construction at a professional price point.
What does the PRO Pack absorber do?
The compact PRO Pack shock absorber deploys during a fall to limit the maximum arresting force to well below the 1,800-lb OSHA limit under 29 CFR 1926.502(d)(16)(iv), protecting the worker's harness and spine during an arrest.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness and anchor do I need?
Connect the harness end to the dorsal D-ring of an ANSI Z359.11 full-body harness and the anchor end to a certified anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15). The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, deceleration distance of roughly 3.5 ft, D-ring height, and a safety factor. Too little clearance risks striking a lower level before the lanyard arrests the fall.
What is the webbing made of?
A polyester web that resists UV, abrasion, and jobsite chemicals for outdoor construction and roofing over the lanyard's service life.
How is it different from the PRO-Stop 1340220?
Both are 3M Protecta single-leg lanyards; the 1341001 uses the standard compact PRO Pack absorber, while the 1340220 PRO-Stop uses progressive tubular webbing for a controlled stop. Choose the 1341001 for the straightforward, cost-effective PRO Pack.
What color is it?
The listing states the 1341001 ships in Red/Gray with a pre-deployment shock-absorber pack.
What work is it for?
General construction, roofing, and elevated work where reliable single-leg fall arrest is required at a professional price point across a crew.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, shock pack, stitching, and snap hooks before each use, and have a competent person perform documented periodic inspections per your fall-protection program.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.