🔍 Click to zoom
3M Protecta PRO Tie-Back Adjustable Shock Absorbing Lanyard — 1342200
$123.00
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the 3M Protecta PRO Tie-Back Adjustable 1342200, a lanyard that makes its own anchor around structure. Editorial assessment by Steven Eaton, WC Safety editor, based on p...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the 3M Protecta PRO Tie-Back Adjustable 1342200, a lanyard that makes its own anchor around structure.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and category fit. We did not laboratory-test this product.
The 3M Protecta PRO Tie-Back Adjustable 1342200 is a single-leg shock-absorbing lanyard whose integrated adjustable D-rings let it work as a tie-back device — loop it around a beam or pipe and clip the snap hook to the D-ring to create a temporary anchor where none exists. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, a 1-inch polyester web, and a 130 to 310 lb capacity, limiting arrest force below the 1,800-lb OSHA limit.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the 3M Protecta PRO Tie-Back Adjustable makes its own anchor
On many jobs the hardest part of tying off is finding an anchor at all. The PRO Tie-Back Adjustable solves that with integrated D-rings: wrap the lanyard around a beam or pipe, clip the snap hook back to the D-ring, and you have a connection where none existed — then adjust the length to shorten slack and reduce free fall. It keeps the PRO Pack absorber holding arrest force below the 1,800-lb OSHA limit, in a 1-inch polyester web built for the weather. As lanyards go, this is the anchor-anywhere pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It brings the anchor to the work.
Safety first: the tie-back makes the connection, but the wrapped structure must still be a suitable anchorage — this lanyard is only one component of a complete personal fall arrest system. Pair it with a compatible ANSI Z359.11 full-body harness at the dorsal D-ring, and confirm the beam or pipe can serve as an anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15), protecting the webbing from sharp edges. Calculate fall clearance: free fall, the roughly 3.5 ft deceleration distance, D-ring height, and a safety factor. Capacity is 130 to 310 lb; retire after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the 3M Protecta PRO Tie-Back Adjustable listing documents
From the published specs: a single-leg design; integrated adjustable tie-back D-rings; a snap-hook harness connector; a 6-ft length; a 1-inch polyester web; a 130 to 310 lb capacity; an arrest force below the 1,800-lb OSHA limit; and OSHA 1926.502 / ANSI Z359.13 compliance. These are true tie-back lanyard credentials and a genuine adjustable lanyard — a versatile shock absorbing lanyard for anchor-scarce work.
How the 3M Protecta PRO Tie-Back Adjustable compares to other lanyards
For a fixed tie-back, the FallTech WrapTech; for the standard PRO Pack, the 3M Protecta PRO Pack 1341001; for a controlled stop, the 3M Protecta PRO-Stop; for an elastic web, the 3M Protecta PRO Stretch; and for 100% tie-off, the twin-leg Elk River Flex-NoPac Twin-Leg or dual-leg Guardian 01230. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The PRO Tie-Back Adjustable suits steel erectors and maintenance crews on structures where dedicated anchors are scarce — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Confirm every wrapped member is a suitable anchorage, keep the weight in range, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the 3M Protecta PRO Tie-Back Adjustable 1342200?
A single-leg shock-absorbing lanyard from 3M's Protecta PRO Pack series with integrated adjustable tie-back D-rings. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, 1-inch polyester web, and a 130 to 310 lb capacity.
How does the tie-back function work?
Loop the lanyard around a beam, pipe, or structural member and clip the snap hook back to the integrated D-ring. That creates a temporary anchor connection where no dedicated anchor point exists - but only around structure suitable and rated to serve as an anchorage.
What does adjustable mean here?
The lanyard length can be adjusted so you can tie off close to the structure and reduce slack and free-fall distance, then shorten or extend it as the work position changes.
Is the wrapped structure automatically a safe anchor?
No - the tie-back function only creates the connection. The beam or pipe you wrap must independently be capable of serving as an anchorage per OSHA 1926.502(d)(15), and you must protect the webbing from sharp or abrasive edges.
How does it limit arrest force?
The PRO Pack shock absorber is designed to limit the maximum arresting force to well below the 1,800-lb OSHA limit under 29 CFR 1926.502(d)(16)(iv), reducing the load on the worker and the harness.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness do I need?
Connect the harness end to the dorsal D-ring of an ANSI Z359.11 full-body harness. The lanyard and its tie-back are not a complete system on their own.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, deceleration distance of roughly 3.5 ft, D-ring height, and a safety factor. Tie off as high and as short as practical to reduce free fall.
How is it different from the fixed 1340060 Tie-Back?
Both are 3M Protecta tie-back lanyards; the 1342200 adds adjustable length so you can shorten slack at the tie-off point, while the 1340060 is a fixed-length tie-back. Choose the 1342200 when adjustability matters.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, D-rings, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, steel erection, and maintenance where dedicated anchor points are scarce and workers need to tie off around available structure with adjustable length.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed 3M Protecta PRO Tie-Back Adjustable Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
3M
Model / SKU
1342200
Product Type
Lanyard
Price
$123.00 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the 3M Protecta PRO Tie-Back Adjustable 1342200?
A single-leg shock-absorbing lanyard from 3M's Protecta PRO Pack series with integrated adjustable tie-back D-rings. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, 1-inch polyester web, and a 130 to 310 lb capacity.
How does the tie-back function work?
Loop the lanyard around a beam, pipe, or structural member and clip the snap hook back to the integrated D-ring. That creates a temporary anchor connection where no dedicated anchor point exists - but only around structure suitable and rated to serve as an anchorage.
What does adjustable mean here?
The lanyard length can be adjusted so you can tie off close to the structure and reduce slack and free-fall distance, then shorten or extend it as the work position changes.
Is the wrapped structure automatically a safe anchor?
No - the tie-back function only creates the connection. The beam or pipe you wrap must independently be capable of serving as an anchorage per OSHA 1926.502(d)(15), and you must protect the webbing from sharp or abrasive edges.
How does it limit arrest force?
The PRO Pack shock absorber is designed to limit the maximum arresting force to well below the 1,800-lb OSHA limit under 29 CFR 1926.502(d)(16)(iv), reducing the load on the worker and the harness.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock absorber to perform as designed.
What harness do I need?
Connect the harness end to the dorsal D-ring of an ANSI Z359.11 full-body harness. The lanyard and its tie-back are not a complete system on their own.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, deceleration distance of roughly 3.5 ft, D-ring height, and a safety factor. Tie off as high and as short as practical to reduce free fall.
How is it different from the fixed 1340060 Tie-Back?
Both are 3M Protecta tie-back lanyards; the 1342200 adds adjustable length so you can shorten slack at the tie-off point, while the 1340060 is a fixed-length tie-back. Choose the 1342200 when adjustability matters.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, D-rings, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
What work is it for?
Construction, steel erection, and maintenance where dedicated anchor points are scarce and workers need to tie off around available structure with adjustable length.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.