🔍 Click to zoom
Werner C311200 DeCoil Snap-Rebar Shock Absorbing Lanyard — Single-Leg, 6 ft
$59.86
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Werner C311200 DeCoil, a single-leg lanyard with a rebar hook. Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner specifications and c...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Werner C311200 DeCoil, a single-leg lanyard with a rebar hook.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Werner specifications and category fit. We did not laboratory-test this product.
The Werner C311200 DeCoil Snap-Rebar is a single-leg shock-absorbing lanyard whose rebar hook anchor connector clamps securely to vertical rebar, scaffold pipe, and horizontal structural members that a standard snap hook cannot safely gate around. It uses Werner's DCELL Shock Pack, has a snap hook on the harness end, a 6-ft length, a 1-inch polyester web, and a 130 to 310 lb capacity, and meets OSHA 1926.502 and ANSI Z359.13.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Werner C311200 anchors where snap hooks can't
On rebar and pipe, a standard snap hook has nowhere safe to gate. The C311200 fixes that with a rebar hook anchor connector that clamps securely to vertical rebar, scaffold pipe, and horizontal structural members — so you can tie off to concrete reinforcement directly. It keeps the DCELL Shock Pack that decelerates a fall with a controlled tearing action, holding arrest force below 900 lb, and the compact DeCoil coil-style design that stays managed at the harness. As lanyards go, this is the rebar-anchor single-leg pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It clips where the work is.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible ANSI Z359.11 full-body harness at the dorsal D-ring and a structural member or anchor rated for at least 5,000 lb per OSHA 1926.502(d)(15). A single-leg lanyard leaves you unprotected during anchor transitions, so plan the work, and calculate fall clearance: free fall, the deployed shock-pack length, D-ring height, and a safety factor. Capacity is 130 to 310 lb and arrest force stays below 900 lb. Retire the lanyard after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the Werner C311200 listing documents
From the published specs: a single-leg design; a rebar hook anchor connector; a snap hook harness connector; a DCELL Shock Pack holding arrest force below 900 lb; a 6-ft length; a 1-inch polyester web; a 130 to 310 lb capacity; and OSHA 1926.502 / ANSI Z359.13 compliance. These are true rebar hook lanyard credentials and a genuine decoil lanyard — a compact single leg lanyard for concrete work.
How the Werner C311200 compares to other lanyards
For the snap-hook DeCoil, the Werner C311100; for the adjustable DeCoil, the Werner C311103; for the twin-leg DeCoil, the Werner C411100; for other rebar-hook single-legs, the Elk River 35374 NoPac or elastic Elk River 35477; and for a dual-leg rebar option, the Guardian 11203. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The C311200 suits rebar and concrete crews who anchor to reinforcement and pipe and want a compact rebar-hook lanyard — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Keep the worker-plus-tools weight in range, verify each structural anchor, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Werner C311200 DeCoil Snap-Rebar?
A single-leg shock-absorbing lanyard from Werner's DeCoil series with a rebar hook anchor connector and the DCELL Shock Pack. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is the rebar hook for?
The rebar hook clamps securely to vertical rebar, scaffold pipe, and horizontal structural members that a standard snap hook cannot safely gate around, letting you anchor to concrete reinforcement and pipe.
What is the DCELL Shock Pack?
Unlike a traditional stitched tear-strip pouch, the DCELL Shock Pack uses a controlled tearing action to decelerate a fall gradually, limiting maximum arresting force below 900 lb in a lighter, more compact package.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock pack to perform as designed.
How is it different from the C311100?
Both are DeCoil single-leg lanyards; the C311200 uses a rebar hook on the anchor end for rebar and pipe, while the C311100 uses a standard snap hook. Choose the C311200 for rebar and structural members.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of any ANSI Z359.11 full-body harness and the rebar hook to a certified anchor or structural member rated for 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed shock-pack length, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
What does the DeCoil coil-style design do?
The coil-style design stays managed at the harness without the bulk of traditional web or rope lanyards, so it is easier to handle and keeps the lanyard tidy while you work on rebar.
What work is it for?
Rebar-intensive concrete work, commercial construction, and industrial jobs where anchoring to rebar, pipe, and structural members is common.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock pack is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, rebar hook, DCELL Shock Pack, stitching, and snap hook before each use, and have a competent person perform documented periodic inspections.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Werner C311200 DeCoil Snap-Rebar Shock Absorbing Lanyard review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Werner
Model / SKU
C311200
Product Type
Lanyard
Price
$59.86 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Werner C311200 DeCoil Snap-Rebar?
A single-leg shock-absorbing lanyard from Werner's DeCoil series with a rebar hook anchor connector and the DCELL Shock Pack. It meets OSHA 1926.502 and ANSI Z359.13, with a 6-ft length, a 1-inch polyester web, and a 130 to 310 lb capacity.
What is the rebar hook for?
The rebar hook clamps securely to vertical rebar, scaffold pipe, and horizontal structural members that a standard snap hook cannot safely gate around, letting you anchor to concrete reinforcement and pipe.
What is the DCELL Shock Pack?
Unlike a traditional stitched tear-strip pouch, the DCELL Shock Pack uses a controlled tearing action to decelerate a fall gradually, limiting maximum arresting force below 900 lb in a lighter, more compact package.
What is the capacity?
The listing states a capacity range of 130 to 310 lb - the combined weight of the worker plus tools and equipment must fall within that range for the shock pack to perform as designed.
How is it different from the C311100?
Both are DeCoil single-leg lanyards; the C311200 uses a rebar hook on the anchor end for rebar and pipe, while the C311100 uses a standard snap hook. Choose the C311200 for rebar and structural members.
What harness and anchor do I need?
Connect the harness snap hook to the dorsal D-ring of any ANSI Z359.11 full-body harness and the rebar hook to a certified anchor or structural member rated for 5,000 lb. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall, the deployed shock-pack length, D-ring height, and a safety factor. Too little clearance risks striking a lower level before arrest.
What does the DeCoil coil-style design do?
The coil-style design stays managed at the harness without the bulk of traditional web or rope lanyards, so it is easier to handle and keeps the lanyard tidy while you work on rebar.
What work is it for?
Rebar-intensive concrete work, commercial construction, and industrial jobs where anchoring to rebar, pipe, and structural members is common.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the shock pack is spent - or if the webbing, stitching, or hardware shows cuts, burns, corrosion, or deformation. Inspect before every use.
Does it need inspection?
Yes - inspect the webbing, rebar hook, DCELL Shock Pack, stitching, and snap hook before each use, and have a competent person perform documented periodic inspections.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.