Safewaze FS560 PRO 6 ft Energy Absorbing Shock Lanyard

Yes. Safewaze PRO lanyards are designed and tested to ANSI Z359.13, which satisfies the performance requirements of OSHA 29 CFR 1926.502(d) for construction and 1910.140 for general industry. Safewaze operates ISO 9001-certified manufacturing and conducts third-party testing to ANSI standards. Each lanyard ships with a technical data sheet documenting compliance certifications.

Safewaze recommends a maximum service life of 5 years from date of first use or 10 years from manufacture date, whichever comes first — provided the lanyard passes pre-use inspection each time and has not arrested a fall. Once a shock absorbing lanyard deploys (arrests a fall), it must be immediately removed from service regardless of remaining calendar life. Inspection records should be maintained per ANSI Z359.2 recommendations.

Double-lock snap hooks must be verified for connector compatibility per ANSI Z359.12 before use. They are appropriate for D-rings, anchor rings, and most structural connectors with bar stock of at least 0.5 in. diameter. They are NOT appropriate for horizontal lifelines unless specifically rated for that use, and must never be connected to another snap hook directly (no hook-to-hook connection). Verify gate clearance fits the anchor without the gate contacting the anchor body.

Total fall clearance = free fall distance + deceleration distance + D-ring height + safety factor. For a 6-ft lanyard with a dorsal anchor at or above D-ring level: free fall ≤ 6 ft + deceleration ~3.5 ft + D-ring height ~5 ft + 3 ft safety factor = approximately 17.5 ft minimum clearance below the work level. Always calculate site-specific clearance before work begins — conditions vary based on anchor point height and worker height.

Yes. OSHA 1926.502(d)(21) requires competent persons to inspect fall arrest equipment before each use. While OSHA does not mandate written inspection logs for each lanyard inspection, ANSI Z359.2 recommends maintaining records. Safewaze's serialized lanyards make it practical to keep per-unit inspection records by serial number — supporting the documentation practices recommended by ANSI Z359.2 and typically required by insurance and safety programs on large projects.