🔍 Click to zoom
Ergodyne ProFlex 7024 A4 Sandy Nitrile Cut-Resistant Gloves
$9.89
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 7024, an A4 sandy-nitrile glove for sharp-metal work. Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specificat...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 7024, an A4 sandy-nitrile glove for sharp-metal work.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
The Ergodyne ProFlex 7024 is an ANSI/ISEA 105-2016 Level A4 cut-resistant glove with a sandy nitrile palm coating, delivering mid-to-high cut protection for industrial manufacturing, sheet metal, and material handling where sharp materials exceed the A2 baseline. The sandy texture grips dry and general-industrial surfaces.
CHECK PRICE ON AMAZON → SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Ergodyne ProFlex 7024 steps up for sharp metal
An A2 glove is fine for boxes and light assembly, but slit-edge sheet metal and work-hardened stampings generate cut forces it was never rated for. The 7024 answers with an A4 liner — the upper-mid range of industrial cut protection — finished with a sandy nitrile palm that bites into smooth parts and tool handles on dry surfaces. The nitrile chemistry adds resistance to industrial oils and greases the work involves. As cut-resistant gloves go, this is the sheet-metal pick, and the best cut-resistant gloves guide and complete cut-glove guide cover how to match glove to task. It handles the edges an A2 can't.
Safety first: the 7024 is a cut-resistant glove, not a chemical glove — its oil resistance is not chemical protection, and it is not rated for a chemical splash hazard. For solvents, acids, or degreasers, wear dedicated chemical-resistant gloves selected by breakthrough time for that chemical, and see the chemical-resistant gloves guide. Match the cut level to the hazard using the ANSI A1-A9 cut-level guide — pick the lowest level that covers the hazard. The A4 rating covers slicing cut forces, not punctures. Replace worn gloves.
What the Ergodyne ProFlex 7024 listing documents
From the published specs: ANSI/ISEA 105-2016 Level A4 cut resistance; a sandy nitrile palm coating for dry, general-industrial grip; and a design for sheet metal, stampings, and sharp-material handling. These are true a4 cut resistant gloves credentials and a genuine set of sandy nitrile gloves — a purpose-built pair of sheet metal gloves.
How the Ergodyne ProFlex 7024 compares to other gloves
For lighter A2 cut, the hi-vis Ergodyne ProFlex 7022, PU 7025, or microfiber 7000; for A5 food-grade, the 7040; for A7, the nitrile 7070; and for a PU alternative, the 7030. The nitrile-vs-PU coating guide explains the trade-offs.
Choosing the right glove for the hazard
Cut level and coating are separate decisions. For coating and cut families, browse the nitrile gloves and mechanics gloves collections; for impact hazards, the impact-resistant gloves and cut-vs-impact guide; and for the mechanic's bench, the mechanics cut-glove guide. Leather options live in the leather work gloves collection.
Where it fits by job and team orders
The 7024 suits sheet-metal shops, fabricators, and manufacturers handling sharp stampings and slit edges who need A4 cut protection with dry grip. Because A4 fiber is stiffer than an A2 liner, reserve it for the tasks that need it and keep a lighter glove for delicate work, so dexterity is never traded away needlessly. Inspect the sandy coating and liner at the start of each shift, size the glove snug for control on sharp parts, keep chemical tasks on chemical gloves, and replace worn pairs promptly. For team orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Ergodyne ProFlex 7024?
An ANSI/ISEA 105-2016 Level A4 cut-resistant glove with a sandy nitrile palm coating. It delivers mid-to-high cut protection for industrial manufacturing, sheet metal, and material handling where sharp materials exceed the A2 baseline.
What does A4 cut resistance mean?
A4 is an upper-mid-range cut-protection level on the ANSI/ISEA 105 A1-A9 scale, as listed. It suits sharp metal stampings, slit-edge sheet metal, glass-fiber composites, and precision fabrication - above the A2 and A3 levels used for general work.
What does the sandy nitrile coating do?
The sandy nitrile palm maximizes friction against smooth parts and tool handles on dry surfaces, and the nitrile chemistry resists a range of industrial oils and greases, as the listing states.
Are these chemical-resistant gloves?
No - the 7024 is a cut-resistant glove and is not rated for a chemical splash hazard. Some oil resistance is not chemical protection; for solvents or acids use dedicated chemical-resistant gloves selected by breakthrough time.
How is it different from the A2 7022?
Both are Ergodyne nitrile-coated cut gloves; the 7024 is A4 for sharp-metal and sheet-metal hazards, while the 7022 is A2 for lighter cut work. Choose the 7024 when the cut hazard exceeds the A2 baseline.
What work is it for?
Industrial manufacturing, sheet metal, metal fabrication, and material handling involving sharp stampings, forgings, and work-hardened edges that generate higher cut forces.
Does it also protect against punctures?
Cut resistance and puncture resistance are different ratings. The A4 rating covers slicing cut forces, not punctures; choose a puncture- or needle-rated glove if that is your hazard.
How do I choose the right size?
Measure your dominant hand around the palm and match Ergodyne's size chart. A snug fit keeps the grip and dexterity that sheet-metal handling needs.
Is A4 always better than A2?
Not necessarily - higher cut levels can add stiffness and reduce dexterity. Choose the lowest cut level that covers your hazard, so A4 for sharp metal but A2 for lighter tasks.
When should I replace them?
Replace the gloves when the sandy coating wears smooth, the liner shows cuts or holes, or grip and fit degrade - worn gloves no longer deliver their rated protection.
Can I use them in oily metalworking?
The sandy nitrile grips dry and general-industrial surfaces; for heavy oil a full-dip heavy-duty nitrile glove is a better match. Match the coating to the surface condition.
How do I order for a team?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
Ergodyne
Model / SKU
7024
Product Type
Safety Gloves
Price
$9.89 (Amazon)
Rating
4.6 / 5 — 34 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★★4.6 / 5· 34 ratings on Amazon
★★★★★
Awesome work gloves
Great quality and fit. Have used for months - oily items, dirt, sawing wood, moving branches & vines. No problems! Very flexible to pick up small screws and washers.Ideal to leave a pair in vehicles for changing tires and such.Will order again!
Verified Purchaser · October 21 · ✓ Amazon Verified Purchase
★★★★★
Excellent work gloves
I prefer these over similar products with thicker, stiffer coatings. These do not work well with cell phones, so I take one off quite often. Also, they are not insulated against the cold. They are still my first choice for working long hours with wood, metals, and tools.
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★★
Flexible, uncomfortable
These gloves are comfortable and flexible, and for my purposes, which is to be the breakdown boxes and do around the house work
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★★★
Good quality
Good quality and Good price.
Verified Purchaser · January 11 · ✓ Amazon Verified Purchase
★★★★★
Feels good
Good product for my use.I do a lot of manual labor, stacking wood, cutting brush, on and on.These gloves are just right for my tasks around the property.
Verified Purchaser · February 1 · ✓ Amazon Verified Purchase
★★★★★
Very durable
My husband uses these at work everyday. They are warm and very durable. One pair lasts about 3 weeks depending on chemicals he is working with. He loves them so much he recommends them for everyone.
Verified Purchaser · January 27 · ✓ Amazon Verified Purchase
★★★☆☆
Not as good as Milwaukee, but they work
I bought these gloves at the same time that I bought some Milwaukee brand gloves. These are clearly inferior to the Milwaukee gloves, but they are cheap and functional.
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★★
Work gloves
I use these everyday as regular work gloves and they serve that purpose.
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★★☆
Really good
For A2 level are really good, save my fingers couple of times, they last me like 3 months, that is more than regular cheap working gloves.
Verified Purchaser · November 2 · ✓ Amazon Verified Purchase
★★★★★
Great Work Gloves!
Very nice work gloves, skinny snug fit & comfortable!
Verified Purchaser · January 2, · ✓ Amazon Verified Purchase
Showing 10 of 34 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.