Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4 Review (2026)

7024 proflex nitrile cut-resistant gloves, a4 review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4 is a safety gloves from Ergodyne, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The Ergodyne ProFlex 7024 Nitrile Coated Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A4 cut resistance with sandy nitrile palm coating — delivering mid-to-high cut protection for industrial manufacturing, sheet metal, and material handling operations where the cut hazard from sharp materials exceeds the A2 baseline and requires the A4 level for adequate laceration protection, with sandy nitrile grip appropriate for dry and general industrial surface conditions. Level A4 cut resistance addresses the upper mid-range of industrial cut hazard — above the A2 and A3 levels appropriate for general construction and moderate materials, appropriate for manufacturing operations involving sharp metal stampings and forgings, moderate-gauge sheet metal with slit edges, glass fiber composite materials, reinforced plastic and rubber components, and precision metal fabrication where work-hardened edges generate cut forces that require A4-rated fiber construction. Sandy nitrile palm coating provides the textured surface grip and chemical resistance appropriate for general industrial use — the sandy texture maximizes friction against smooth parts and tool handles on dry surfaces, and the nitrile chemistry provides resistance to a range of industrial oils, greases, and chemicals that the operations where A4 cut is specified typically involve. This is the A4-level option in the Ergodyne 7024 product family — the glove for operations where the A2 smooth PU version is under-specified for the cut hazard level but where the task environment is a dry or general industrial setting rather than an oily metalworking environment requiring heavy-duty nitrile. Programs with tiered cut protection specifications can include the 7024 A4 sandy nitrile alongside lower-cut-level options for different task groups within the same facility, providing cut-matched hand protection for each documented exposure tier.

A4 cut resistance is the specification for industrial manufacturing environments where the cut hazard profile from specific materials and operations requires above-A3 protection — typically where precision metal parts with machined sharp edges, stamped metal components with die-cut profiles, glass-fiber reinforced materials, and industrial fabrication materials generate measured cut forces in the A4 threshold range. Manufacturing QC inspectors handling stamped metal components, parts handlers in precision metal fabrication, assembly workers integrating sharp-edge metal brackets and hardware, and general manufacturing workers in facilities with documented A4-level cut materials specify gloves at this tier. Sandy nitrile coating is the standard grip formulation for general industrial settings with dry-to-moderate humidity conditions and light surface contamination — providing reliable grip on metal parts, tool handles, cardboard, and assembly materials that are the typical surface contacts in manufacturing material handling. The 7024 A4 sandy nitrile targets the gap between light-duty A2 smooth PU designs for precision work and heavy-duty A7 designs for extreme-cut metalworking — serving the mid-upper industrial cut protection range in a familiar sandy nitrile format that works across the range of general manufacturing surface conditions.

A4 cut protection addresses the mid-to-upper industrial cut hazard range that A2 gloves under-protect against in manufacturing and fabrication environments with sharp metal components. Industrial workers handling stamped metal parts, precision fabricated components, and sharp-profile materials receive the A4 cut level that the documented hazard requires — without the extreme-cut-level overspecification of A7 designs for materials that don't require it.

Where It Earns Its Slot

Where it earns its slot: The Ergodyne ProFlex 7024 Nitrile Coated Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A4 cut resistance with sandy nitrile palm coating — delivering mid-to-high cut protection for industrial manufacturing, sheet. The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

Its boundaries are the category's: protection is limited to the rated hazards at the rated levels, chemical exposure is governed by breakthrough time rather than resistance in the abstract, and fit determines whether any of it reaches the hand. Verify the marking against the task before relying on it.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4 does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

How much does the Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4 cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4 listing actually document?

The Ergodyne ProFlex 7024 Nitrile Coated Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A4 cut resistance with sandy nitrile palm coating — delivering mid-to-high cut protection for industrial manufacturing, sheet metal, and material handling operations where the cut hazard from sharp materia…

What are the alternatives to the Ergodyne 7024 ProFlex Nitrile Cut-Resistant Gloves, A4?

The sibling safety gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.