What is the cut resistance level of the Ergodyne 9015F(x) ProFlex Anti-Vibration + Dorsal Protection Gloves?

These gloves are rated to an ANSI/ISEA 105 cut level rated for the application described in the product title. Refer to the product listing for the specific ANSI cut rating. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the a coated coating on these gloves for?

The a coated coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 9015F(x) Anti-Vibration Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 9015F(x) Anti-Vibration Gloves

Name: Ergodyne ProFlex 9015F(x) Anti-Vibration Gloves
Brand: Ergodyne
SKU: 9015FX-S
Price: 67.14 USD
Availability: InStock

Ergodyne SKU: 9015FX-S Safety Gloves GTIN: 0720476173021

★ ★ ★ ★ ★ 4.8 (128 Amazon ratings)

$42.48

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 9015F(x) Anti-Vibration Gloves with Dorsal Protection The Ergodyne ProFlex 9015F(x) combines ANSI/ASA S2.73-2014 and ISO 10819:2013 certified anti-vibration performance with TPR dorsal impact protecti...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI/ASA S2.73 Anti-Vibration Dorsal Impact Ergodyne ISO 10819 ProFlex Work Gloves

Ergodyne ProFlex 9015F(x) Anti-Vibration Gloves with Dorsal Protection

The Ergodyne ProFlex 9015F(x) combines ANSI/ASA S2.73-2014 and ISO 10819:2013 certified anti-vibration performance with TPR dorsal impact protection — addressing both vibration exposure and back-of-hand impact risk in a single glove. AVC palm padding reduces transmitted vibration from tool operation. TPR molded armor on the dorsal side protects against bumping and striking hazards without compromising grip or dexterity.

Key Features

Dual Certification — Meets ANSI/ASA S2.73-2014/ISO 10819:2013 (anti-vibration) and ANSI/ISEA 138-2019 (dorsal impact protection).
AVC Palm Padding — Anti-Vibration Coating palm reduces vibration transmitted from tools to the hand.
TPR Dorsal Impact Protection — Thermoplastic rubber armor on the back of hand protects against impact and abrasion hazards.
Full Finger Coverage — Complete hand protection for work environments combining vibration and impact risk.