Ergodyne ProFlex 9015F(x) Vibration Resistant Gloves — TPR Dorsal Impact, Dual Certified
$67.14
Final price set by Amazon · may vary
Size: Small
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 9015F(x), dual-certified vibration resistant gloves with TPR dorsal impact armor. Editorial assessment by Steven Eaton, WC Safety editor, based on p...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Ergodyne ProFlex 9015F(x), dual-certified vibration resistant gloves with TPR dorsal impact armor.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
The Ergodyne ProFlex 9015F(x) is the answer to a question the rest of the glove wall dodges: what if the job vibrates and hits back? Certified AVC damping under the palm — ANSI S2.73 and ISO 10819 — plus TPR molded armor over the knuckles rated to ANSI/ISEA 138. Two lab-tested protections, one glove, for the crews whose hazard list doesn't come one at a time.
CHECK PRICE ON AMAZON → SHOP ANTI-VIBRATION GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Where dual-certified vibration resistant gloves fit
Real jobsites stack hazards. The demolition hand running a chipping gun is also reaching between rebar; the mechanic on an impact wrench works inches from swinging steel and pinch points. Standard practice is to pick a glove for the loudest hazard and accept the other bare-knuckled — or to keep two pairs and wear whichever was closer. The 9015FX exists to end that ritual: certified vibration damping and certified dorsal impact protection in the same build, so the glove on your hand answers both lines of the hazard assessment. The anti-vibration reference guide covers the vibration half; the cut-vs-impact explainer maps the armor half.
Safety first: both certifications are laboratory measurements — real-world attenuation at the palm depends on fit, grip force, and the tool, and dorsal armor only protects the bones it actually covers. Keep gloves one layer of the program: maintained tools, sharp consumables, and capped trigger time cut the vibration dose at the source. Tingling or numbness that outlasts the shift is a medical signal — vibration damage is permanent.
What the listing documents
From the listing: dual certification — ANSI/ASA S2.73-2014 / ISO 10819:2013 anti-vibration (lab-tested palm transmissibility) and ANSI/ISEA 138-2019 dorsal impact protection; AVC palm padding reducing vibration transmitted from tools; TPR molded armor on the back of the hand against impact and abrasion, engineered to protect without compromising grip or dexterity; full-finger coverage for combined vibration-and-impact environments; sizes Small through 2X-Large.
Picking inside the ProFlex vibration family
Five certified models, one hazard map: the open-back 9000 for hot shifts on moderate tools, the fine-knit 9003 when dexterity leads, the full-finger 9002 with its wrist wrap for general covered work, the 9012 when the breaker owns the day, and this 9015FX when strikes join the vibration dose. Crews shopping anti vibe gloves by feel should shop by the second hazard instead — it's what separates the top of the family.
One glove or two — the honest math
For pure strike-and-pinch work with no vibration dose, dedicated impact gloves like the ProFlex 925FX or the A7 cut-impact 7070 from the impact collection run lighter and cheaper — the impact roundup ranks them. For pure vibration, the rest of the AV collection costs less. The 9015FX wins exactly where the hazards overlap: as vibration reducing gloves that don't leave knuckles bare, one dual-rated pair beats two pairs that take turns being in the truck.
Ownership and program fit
Measure against Ergodyne's chart — five sizes exist because pad alignment and armor placement are the protection — and inspect both systems monthly under heavy use: retire on compressed padding, cracked TPR segments, or worn-through fingertips. Fill the rest of the hand program by hazard: cut-rated gloves for blades per the complete cut guide, mechanics picks and the mechanics collection for general days, and the wider trade glove lineup between — with leather picks for abrasion days, cut-rated mechanics gloves where edges enter the work, and the coating choice guide for the everyday knits. For crew-scale orders, quantity purchasing runs through a free Amazon Business account — the walkthrough is linked in our footer.
Anti-vibration gloves are selected against ISO 5349, which defines how hand-arm vibration exposure is measured and weighted — the standard a buyer actually needs and one that rarely appears on a product page. The glove attenuates at specific frequencies; it does not remove the exposure, and daily trigger time is still the controlling variable. Cut, abrasion and puncture performance is rated separately under ANSI/ISEA 105. Compare across anti-vibration gloves, cut resistant gloves.
Frequently asked questions
What is the Ergodyne ProFlex 9015F(x)?
A full-finger, dual-certified glove: AVC palm padding certified to ANSI/ASA S2.73-2014 and ISO 10819:2013 for vibration, plus TPR molded dorsal armor certified to ANSI/ISEA 138-2019 for back-of-hand impact. Sizes Small through 2X-Large.
What does dual certification actually mean here?
Two separate lab-tested standards on one glove: the vibration standards measure transmissibility at the palm on a shaker table, and ANSI/ISEA 138 rates dorsal impact protection. Most gloves carry one or neither; the 9015FX states both.
Who needs vibration and impact protection at once?
Demolition, mining, oil and gas, heavy mechanical work — anywhere a vibrating tool lives among pinch points, swinging steel, and strike hazards. One glove that answers both beats swapping pairs mid-task or choosing which hazard to ignore.
What is the TPR armor?
Thermoplastic rubber molded over the back of the hand and fingers — it spreads and absorbs strike energy and shrugs off abrasion without turning the glove rigid. It's the same protection language as dedicated impact gloves, here layered over a certified vibration palm.
Does the dorsal armor cost dexterity?
The listing is explicit that the armor protects without compromising grip or dexterity — TPR segments flex at the joints. It's still a heavier glove than the fine-knit end of the family; that's the price of covering two hazards.
How does the 9015FX differ from the 9012?
The 9012 is the breaker specialist: full-length palm padding plus a wrist stay, no dorsal armor. The 9015FX trades the wrist stay for ANSI/ISEA 138 impact armor on the back of the hand. Pick by your second hazard: repetitive wrist load → 9012; strikes and pinch points → 9015FX.
Is this a substitute for dedicated impact gloves?
For combined-hazard tasks, it covers both with stated ratings. For pure impact work with no vibration dose, a dedicated impact glove is lighter and cheaper — match the glove to the hazard mix, not the other way around.
What sizes are available?
Small through 2X-Large per the listing. Five sizes matter: the AVC pad only performs aligned under your grip line, and dorsal armor only covers knuckles it actually sits over.
When should the pair be retired?
When the palm padding compresses or delaminates, when TPR segments crack or pull from the shell, or when fingertips wear through. Either protection failing quietly ends the rating that justified the price.
Why is it the most expensive glove in the family?
Two certified protection systems in one build — engineered damping plus molded armor, both lab-tested. Against buying and juggling two pairs, one dual-certified glove usually wins on cost and definitely wins on actually being worn.
Do gloves alone control vibration exposure?
No — they cut the dose at the palm. Maintained tools, sharp consumables, and capped trigger time cut it at the source. Persistent tingling or numbness after shifts is a medical signal, not a toughness test.
How do I order for a full crew?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Ergodyne ProFlex 9015F(x) Vibration Resistant Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Ergodyne
Model / SKU
9015FX-S
Product Type
Safety Gloves
Price
$42.48 (Amazon)
Rating
3.0 / 5 — 29 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★☆☆3.0 / 5· 29 ratings on Amazon
★★★☆☆
Good News / Bad News
The good news is the Vibration Reduction and Dorsal Protection (what is a dorsal anyway?) work as advertised. The bad news is the pads are so thick it makes griping any power tool I've ever used problematic - so you end up making a trade off - less vibration but your hands have to exert additional pressure because your grip gets more awkward.I still plan to use them when I knock out a section of brick, but other wise they stay with my hammer drill. Maybe if I had XL hands instead of L hands the comfort level would be different. Please note by the same token, I doubt these gloves are usable by anyone with M or S sized hands.
Verified Purchaser · March 9, 2 · ✓ Amazon Verified Purchase
★★★★☆
A very Thick Glove
I bought these to use for ATV riding and I don't think that is going to fly because they are to thick to really grip the bike with. I will use them for other things around the house and have already invested in a little lighter pair of gloves for riding.
Verified Purchaser · May 5, 201 · ✓ Amazon Verified Purchase
★☆☆☆☆
I was very disappointed in these
I was very disappointed in these. Very expensive and they did not hold up. I was using them when I operated an impact driver. the padding fell out and seams split within the first couple of months. Given the price of anti vibe gloves it would be nice to see these sold individually as often they are too thick to use on one hand. Example: driving fasterners requires one hand that can easily grab and hold a fastener.
Verified Purchaser · June 2, 20 · ✓ Amazon Verified Purchase
★★★★★
nice gloves
These gloves are great, they seem to fit a little bigger than normal so I recommend getting one size smaller.
Verified Purchaser · April 30, · ✓ Amazon Verified Purchase
★★★★☆
they help with vibrations. save my hands and wrists ...
they help with vibrations. save my hands and wrists from days of pain from standard work with tools. they are thick so grasping some things is harder but that was expected so i learned how to deal with it.
Verified Purchaser · December 1 · ✓ Amazon Verified Purchase
★☆☆☆☆
I read these gloves were a good product for his needs
These did not hold up to my husband's job at all. If you work with any type of heating elements or sparks this is not the glove for you. He is a grinder and the vibration causes issues. I read these gloves were a good product for his needs... The mesh burnt and ripped quickly, he used for maybe 2 hrs.
Verified Purchaser · October 19 · ✓ Amazon Verified Purchase
★★★★☆
Great Gloves
Given as a gift, but feedback was that they were too stiff to adequately receive tactile feedback from equipment being operated.
Verified Purchaser · September · ✓ Amazon Verified Purchase
★★★★☆
very good gloves
Great gloves for vibration! Got it for constant drilling and it works like a charm! Highly recommend it! Fast service!
Verified Purchaser · April 22, · ✓ Amazon Verified Purchase
Showing 8 of 29 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Ergodyne ProFlex 9015F(x)?
A full-finger, dual-certified glove: AVC palm padding certified to ANSI/ASA S2.73-2014 and ISO 10819:2013 for vibration, plus TPR molded dorsal armor certified to ANSI/ISEA 138-2019 for back-of-hand impact. Sizes Small through 2X-Large.
What does dual certification actually mean here?
Two separate lab-tested standards on one glove: the vibration standards measure transmissibility at the palm on a shaker table, and ANSI/ISEA 138 rates dorsal impact protection. Most gloves carry one or neither; the 9015FX states both.
Who needs vibration and impact protection at once?
Demolition, mining, oil and gas, heavy mechanical work — anywhere a vibrating tool lives among pinch points, swinging steel, and strike hazards. One glove that answers both beats swapping pairs mid-task or choosing which hazard to ignore.
What is the TPR armor?
Thermoplastic rubber molded over the back of the hand and fingers — it spreads and absorbs strike energy and shrugs off abrasion without turning the glove rigid. It's the same protection language as dedicated impact gloves, here layered over a certified vibration palm.
Does the dorsal armor cost dexterity?
The listing is explicit that the armor protects without compromising grip or dexterity — TPR segments flex at the joints. It's still a heavier glove than the fine-knit end of the family; that's the price of covering two hazards.
How does the 9015FX differ from the 9012?
The 9012 is the breaker specialist: full-length palm padding plus a wrist stay, no dorsal armor. The 9015FX trades the wrist stay for ANSI/ISEA 138 impact armor on the back of the hand. Pick by your second hazard: repetitive wrist load → 9012; strikes and pinch points → 9015FX.
Is this a substitute for dedicated impact gloves?
For combined-hazard tasks, it covers both with stated ratings. For pure impact work with no vibration dose, a dedicated impact glove is lighter and cheaper — match the glove to the hazard mix, not the other way around.
What sizes are available?
Small through 2X-Large per the listing. Five sizes matter: the AVC pad only performs aligned under your grip line, and dorsal armor only covers knuckles it actually sits over.
When should the pair be retired?
When the palm padding compresses or delaminates, when TPR segments crack or pull from the shell, or when fingertips wear through. Either protection failing quietly ends the rating that justified the price.
Why is it the most expensive glove in the family?
Two certified protection systems in one build — engineered damping plus molded armor, both lab-tested. Against buying and juggling two pairs, one dual-certified glove usually wins on cost and definitely wins on actually being worn.
Do gloves alone control vibration exposure?
No — they cut the dose at the palm. Maintained tools, sharp consumables, and capped trigger time cut it at the source. Persistent tingling or numbness after shifts is a medical signal, not a toughness test.
How do I order for a full crew?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.