🔍 Click to zoom
Ergodyne ProFlex 7000 A2 Cut-Resistant Microfiber Palm Gloves
$13.99
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Ergodyne ProFlex 7000, an A2 cut glove with a residue-neutral microfiber palm. Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne sp...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Ergodyne ProFlex 7000, an A2 cut glove with a residue-neutral microfiber palm.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Read the full Ergodyne ProFlex 7000 A2 Cut-Resistant Microfiber Palm Gloves review →
The Ergodyne ProFlex 7000 is an ANSI/ISEA 105-2016 Level A2 cut-resistant glove with a microfiber palm coating and touchscreen-compatible fingertips, delivering light cut protection with a soft, residue-neutral textile surface for electronics assembly, instrumentation, and precision production. It pairs certified A2 protection with a contact surface gentle enough for sensitive components.
CHECK PRICE ON AMAZON → SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Ergodyne ProFlex 7000 suits sensitive work
Most cut gloves finish the palm in PU or nitrile — fine for steel, wrong for a circuit board that a polymer film can smudge or a static-sensitive part. The 7000 takes a different route: a soft microfiber palm with moisture management and residue-neutral contact, so it handles optics, electronics, and precision assemblies gently while still carrying certified A2 cut protection. Touchscreen fingertips let workers scan, log, and drive HMIs without pulling the glove. As cut-resistant gloves go, this is the sensitive-surface pick, and the best cut-resistant gloves guide and complete cut-glove guide cover how to match glove to task. It protects the hand without marking the part.
Safety first: the 7000 is a cut-resistant glove, not a chemical glove — it is not rated for a chemical splash hazard. If your task involves solvents, degreasers, acids, or other chemicals, wear dedicated chemical-resistant gloves selected by breakthrough time for that specific chemical, and see the chemical-resistant gloves guide. Match the cut level to the hazard using the ANSI A1-A9 cut-level guide; the listed A2 rating covers light slicing cut forces, not punctures. Replace the gloves once the coating or liner wears through.
What the Ergodyne ProFlex 7000 listing documents
From the published specs: ANSI/ISEA 105-2016 Level A2 cut resistance; a microfiber palm coating; touchscreen-compatible fingertips; and a design aimed at electronics, instrumentation, and precision production. These are true microfiber palm gloves credentials and a genuine a2 cut resistant gloves spec — a residue-neutral pair of touchscreen work gloves.
How the Ergodyne ProFlex 7000 compares to other gloves
For a thin tactile PU palm, the Ergodyne ProFlex 7025 or 7030; for a hi-vis nitrile palm, the Ergodyne ProFlex 7022; for higher A4 cut, the Ergodyne ProFlex 7024; for A5 food-grade, the 7040; and for A7, the 7070. The nitrile-vs-PU coating guide explains the trade-offs.
Choosing the right glove for the hazard
Cut level and coating are separate decisions. For coating and cut families, browse the nitrile gloves and mechanics gloves collections; for impact hazards, the impact-resistant gloves and cut-vs-impact guide; and for the mechanic's bench, the mechanics cut-glove guide. Leather options live in the leather work gloves collection.
Where it fits by job and team orders
The 7000 suits electronics assemblers, instrument techs, and precision manufacturers who need light cut protection and a gentle, residue-neutral touch. Because the microfiber palm is optimized for dry, sensitive-surface handling, keep a nitrile- or sandy-nitrile-coated glove on hand for oily or heavier-grip tasks so each job gets the right coating. Inspect the palm and fingertips at the start of each shift, size the glove snug so the touchscreen fingertips stay accurate, keep chemical tasks on chemical gloves, and replace worn pairs promptly. For team orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Brand / Vendor
Ergodyne
Model / SKU
7000
Product Type
Safety Gloves
Price
$13.99 (Amazon)
Rating
4.6 / 5 — 10 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.4 / 5· 148 ratings on Amazon
★★★★★
A very nice glove though super-lightweight. Maybe a bit too lightweight for some tasks.
This reviewer is sort of a glove maven and owns many pair of work, tactical, and winter gloves. Purchased these Ergodyne 7000 nitrile gloves to replace a pair of worn out Mechanix Wear (MW) C3 nitrile gloves. The MW C3 gloves are sort of a standard for this comparison. By way of comparison, the MW gloves are heavier duty and offer superior shock protection to the Ergodyne ProFlex. The Ergodyne ProFlex gloves are lighter, a little airier, fit very snugly providing superior tactile feel, and easily fold up to wear in a back pocket, easier and less bulky than the C3s. The Ergodyne ProFlex are so light, I would have concerns about their ability to perform heavy yard work/gardening (would prefer the C3s for that sort of work) but as a pair of gloves kept in the back pocket to handle breaking down cardboard, sorting recyclables, light fueling vehicles and/or light project work, they should work well.Pros (per Ergodyne):ABRASION RESISTANT - ANSI/ISEA 105-2016 level 5 abrasion resistance for protection when working with rough materialsFLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfacesLIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating for enhanced dexterity and minimal hand fatigueTOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing glovesLONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris outMACHINE WASHABLETESTED - Meets EN 388: 4121A and ANSI/ISEA 105-2016 level A1 cut-resistant, level 5 abrasion resistant and level 2 puncture resistant standardsCONS:Maybe a bit too lightweight for gardening work.
Verified Purchaser · January 30 · ✓ Amazon Verified Purchase
★★★★★
Great gloves
My husband uses for work. They are great and last quite a while.
Verified Purchaser · January 31 · ✓ Amazon Verified Purchase
★★★★★
Best gloves
Love these gloves. Shipping was very fast. I always get my gloves here
Verified Purchaser · October 12 · ✓ Amazon Verified Purchase
★★★☆☆
Wrong Size
I ordered a size small. They came with no size tag and were way to big. I have ordered this brand numerous times in small from other vendors. They have always had a size marking and fit perfect.
Verified Purchaser · January 24 · ✓ Amazon Verified Purchase
★★★★★
Thanks
high-quality product
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★☆
Actually fits, but wears out quickly
My Job requires some puncture resistance and on that front these actually delivered. I have smaller hands so finding gloves that would fit tight enough to be safe while working has been a real PITA for me, but to my surprise these are fairly elastic and cling well, a decent thickness for protection, and actually fit really well. So the grip is quite good.The only downside is the durability. After only about a week of daily use the coating sort of just dissolved from the finger tips. So replacing them weekly would be a must for my job- which does work with sanitizing chemicals though. Might hold up longer if you're not having to keep them wet.
Verified Purchaser · August 20, · ✓ Amazon Verified Purchase
★★★★★
Good for use with 3d printer resin
Nice construction and fit tightly on my hand. I wanted something that I could mess with my 3d printer resin, and it would not get on my hand. These are perfect for that. I have had them for a while, and they seem to be holding up nicely. Makes for easy cleanup. Will buy more of them when or if I need them.
Verified Purchaser · January 14 · ✓ Amazon Verified Purchase
★★★★★
Great work gloves!!
These gloves are lightweight, but still good coverage and protection when working. They have good stretch, and the rubberized coating is great for safety!! He uses them for various chores without any problems or issues!
Verified Purchaser · June 25, 2 · ✓ Amazon Verified Purchase
★★★★★
Gloves
It's worth the cost.
Verified Purchaser · January 9, · ✓ Amazon Verified Purchase
★★★★☆
Good grip.
Gloves are a little stiffer than i would like. Very durable. Very good grip. Ok value.
Verified Purchaser · May 22, 20 · ✓ Amazon Verified Purchase
Showing 10 of 148 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.