Are the Ergodyne 7070 ProFlex Nitrile Cut-Resistant Gloves, A7, Heat Resistant latex-free?

Yes. Nitrile gloves are made from synthetic rubber (acrylonitrile-butadiene) and contain no natural latex proteins. They are safe for workers and patients with Type I latex allergies. Nitrile is the most widely used latex-alternative for disposable examination and industrial gloves.

Are the Ergodyne 7070 ProFlex Nitrile Cut-Resistant Gloves, A7, Heat Resistant powder-free?

Check the product specifications for powder content. Powdered gloves use cornstarch to ease donning but are restricted or banned in many healthcare, food, and pharmaceutical environments due to contamination and allergy concerns.

What thickness are the Ergodyne 7070 ProFlex Nitrile Cut-Resistant Gloves, A7, Heat Resistant?

These gloves are rated thick. Thicker nitrile (6 mil+) provides better puncture resistance and chemical protection for industrial use. Thinner nitrile (3–4 mil) offers better tactile sensitivity for medical examination and light-duty work. The right thickness depends on the task hazard and dexterity requirements.

What are nitrile gloves used for?

Nitrile gloves are used across healthcare (examination, surgical), food service, laboratory, chemical handling, automotive, janitorial, and general industrial applications. They provide good resistance to many oils, fuels, and chemicals. For specific chemical exposures, always verify the glove's chemical resistance rating against the SDS.

Do nitrile gloves protect against chemicals?

Nitrile provides good resistance to many petroleum-based oils, fuels, some solvents, and dilute acids and bases. However, nitrile is NOT resistant to all chemicals — ketones (acetone), some aromatics, and certain solvents can permeate nitrile. Always consult a chemical resistance guide and the SDS before using nitrile gloves for chemical handling.

What ASTM standards apply to nitrile examination gloves?

Medical examination gloves must meet ASTM D6319 (nitrile exam gloves) for dimensions, tensile strength, elongation, and freedom from holes. Industrial-grade nitrile gloves may not meet ASTM D6319. For medical use, confirm the gloves are FDA 510(k)-cleared and meet ASTM D6319 or equivalent.

What sizes are available for Ergodyne nitrile gloves?

Nitrile gloves are available in XS, S, M, L, and XL (some brands offer XXL). Proper sizing ensures adequate dexterity and prevents glove failure from over-stretching. To size: XS = under 7 inches hand circumference, S = 7–8 in., M = 8–9 in., L = 9–10 in., XL = 10+ inches.

How many gloves come per box?

Nitrile examination and industrial gloves typically come 100 per box (50 pairs). Some heavy-duty industrial nitrile gloves come in lower counts per box. Check the product listing for the exact count.

Ergodyne ProFlex 7070 ANSI A7 Nitrile Coated Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7070 ANSI A7 Nitrile Coated Work Gloves

Name: Ergodyne ProFlex 7070 ANSI A7 Nitrile Coated Work Gloves
Brand: Ergodyne
SKU: 7070-S
Price: 21.53 USD
Availability: InStock

Ergodyne SKU: 7070-S Safety Gloves GTIN: 720476180425

★ ★ ★ ★ ★ 4.8 (234 Amazon ratings)

$15.25

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7070 ANSI A7 Nitrile Coated Work Gloves The Ergodyne ProFlex 7070 is a high-cut-level nitrile-coated glove rated to ANSI A7 — one of the highest cut protection levels in the ANSI/ISEA 105 classificati...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A7 Cut Resistant Ergodyne Green High Cut Level Nitrile Coated ProFlex Safety Gloves

Ergodyne ProFlex 7070 ANSI A7 Nitrile Coated Work Gloves

The Ergodyne ProFlex 7070 is a high-cut-level nitrile-coated glove rated to ANSI A7 — one of the highest cut protection levels in the ANSI/ISEA 105 classification system. It is built for environments with severe cut hazards: automotive stamping, scrap metal handling, glass manufacturing, and metal fabrication where standard A4 or A5 gloves are insufficient. The nitrile palm coating delivers grip in dry and lightly oily conditions while the high-performance A7 liner maintains dexterity better than heavyweight leather alternatives.

Key Features

ANSI A7 Cut Resistance — Highest practical cut protection for industrial gloves; designed for metal stamping, automotive, scrap handling, and glass applications with severe laceration risk.
Nitrile Palm Coating — Provides grip and abrasion resistance in dry and lightly oily environments without the bulk of leather alternatives.
High-Performance Liner — Advanced cut-resistant yarn construction delivers A7 protection while maintaining dexterity and comfort for extended use.
Lightweight Design — Provides maximum cut protection without the weight and stiffness of cut-resistant gloves using heavier materials.

Compliance

Meets ANSI/ISEA 105 A7 cut resistance — the highest rated cut level. Required for severe cut environments in automotive, metal fabrication, glass handling, and scrap processing industries.