What is the cut resistance level of the Ergodyne 7041 ProFlex Hi-Vis A4 WSX Nitrile Work Gloves?

These gloves are rated to an ANSI/ISEA 105 cut level rated for the application described in the product title. Refer to the product listing for the specific ANSI cut rating. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the nitrile coating on these gloves for?

The nitrile coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion. Nitrile coatings also provide limited resistance to some oils and mild chemicals.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7041 Cut Resistant Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7041 Cut Resistant Work Gloves

Name: Ergodyne ProFlex 7041 Cut Resistant Work Gloves
Brand: Ergodyne
SKU: 7041-S
Price: 10.09 USD
Availability: InStock

Ergodyne SKU: 7041-S Cut Resistant Gloves GTIN: 0720476178125

★ ★ ★ ★ ★ 4.8 (4925 Amazon ratings)

$10.09

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7041 Cut Resistant Work Gloves The Ergodyne ProFlex 7041 is a nitrile-coated cut-resistant work glove rated to ANSI A4. The lime color provides visibility on the job site and in environments where han...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A4 Cut Resistant Ergodyne Lime Nitrile Coated ProFlex Work Gloves

Ergodyne ProFlex 7041 Cut Resistant Work Gloves

The Ergodyne ProFlex 7041 is a nitrile-coated cut-resistant work glove rated to ANSI A4. The lime color provides visibility on the job site and in environments where hand position monitoring matters. A foam nitrile palm coating delivers grip in dry and lightly oily conditions while the lightweight 13-gauge cut-resistant shell maintains dexterity for assembly, fabrication, and material handling tasks. The knitted wrist cuff provides a secure fit that resists slipping during active use. A4-rated cut protection makes this glove suitable for heavier fabrication and stamped metal handling than standard A2 or A3 options.

Key Features

ANSI A4 Cut Resistance — Higher cut protection suited for automotive glass, stamped metal, and other materials presenting a moderate-to-elevated cut risk.
Foam Nitrile Palm — Provides grip, abrasion resistance, and cut protection in dry and lightly oily conditions.
Hi-Vis Lime Color — Improves hand visibility in production floors, assembly areas, and job sites where hand positioning is monitored.
Lightweight 13-Gauge Shell — Maintains dexterity for assembly and precision handling at A4 protection levels.

Compliance

Meets ANSI/ISEA 105 A4 cut resistance. Appropriate for metal fabrication, glass handling, automotive assembly, and general industrial work with elevated cut hazards.