Ergodyne ProFlex 7044 A4 PU-Coated Cut-Resistant Gloves — 13-Gauge
$9.59
Final price set by Amazon · may vary
Size: Small
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Ergodyne ProFlex 7044, an A4 PU glove that bridges the range. Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the Ergodyne ProFlex 7044, an A4 PU glove that bridges the range.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Ergodyne specifications and category fit. We did not laboratory-test this product.
The Ergodyne ProFlex 7044 is an ANSI/ISEA 105 A4 PU-coated cut-resistant glove on a 13-gauge shell, bridging the A3 7030 and the A5 7042 — A4 cut protection with the thin PU coating's tactile advantage over nitrile. The gray PU palm grips dry parts with abrasion resistance for precision manufacturing and light fabrication.
CHECK PRICE ON AMAZON → SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Ergodyne ProFlex 7044 fills the A4 PU gap
Ergodyne's PU line steps A3, A4, A5 — and the 7044 is the middle rung. It gives you A4 cut protection, a real step above the A3 7030, without jumping to the A5 7042 you may not need, all while keeping the thin PU palm's fingertip feel over a thicker nitrile A4. On a lightweight 13-gauge shell, it stays comfortable for precision manufacturing and light fabrication. As cut-resistant gloves go, this is the A4-with-feel pick, and the best cut-resistant gloves guide and complete cut-glove guide cover how to match glove to task. It hits A4 without dulling the touch.
Safety first: the 7044 is a cut-resistant glove, not a chemical glove — it is not rated for a chemical splash hazard. If your task involves solvents, degreasers, acids, or other chemicals, wear dedicated chemical-resistant gloves selected by breakthrough time, and see the chemical-resistant gloves guide. Match the cut level to the hazard using the ANSI A1-A9 cut-level guide and pick the lowest level that covers it; the listed A4 rating covers slicing cut forces, not punctures. Replace the gloves once the coating or liner wears through.
What the Ergodyne ProFlex 7044 listing documents
From the published specs: ANSI/ISEA 105 A4 cut resistance; a thin gray PU palm coating for tactile feel; a lightweight 13-gauge shell; and dry-condition grip for precision assembly and fabrication. These are true a4 cut resistant gloves credentials and a genuine set of pu coated gloves — a dexterous pair of precision cut gloves.
How the Ergodyne ProFlex 7044 compares to other gloves
For the A3 PU below it, the Ergodyne ProFlex 7030; for the A5 PU above it, the 7042; for A4 foam nitrile, the 7041; for A4 sandy nitrile, the 7024; and for the highest A7, the 7072. The nitrile-vs-PU coating guide explains the trade-offs.
Choosing the right glove for the hazard
Cut level and coating are separate decisions. For coating and cut families, browse the nitrile gloves and mechanics gloves collections; for impact hazards, the impact-resistant gloves and cut-vs-impact guide; and for the mechanic's bench, the mechanics cut-glove guide. Leather options live in the leather work gloves collection.
Where it fits by job and team orders
The 7044 suits precision manufacturers, light fabricators, and automotive assemblers who want A4 cut protection with fingertip feel. Because a thin PU palm wears faster than nitrile, budget for replacement on abrasive tasks and step to the foam-nitrile 7041 where grip and durability matter more than feel. Inspect the coating and liner each shift, size the glove snug for dexterity, keep chemical tasks on chemical gloves, and replace worn pairs promptly. For team orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Ergodyne ProFlex 7044?
An ANSI/ISEA 105 A4 PU-coated cut-resistant glove on a 13-gauge shell. It bridges the A3 7030 and the A5 7042, offering A4 cut protection with the thin PU coating's tactile advantage over nitrile, for precision manufacturing and light fabrication.
What does A4 cut resistance mean?
A4 is an upper-mid-range cut-protection level on the ANSI/ISEA 105 A1-A9 scale, as listed. It suits stamped-metal handling and automotive glass above the A3 baseline but below the A5-plus levels.
Why PU at A4?
Polyurethane is thinner and more tactile than nitrile, so the 7044 keeps better fingertip sensitivity than a nitrile-coated A4 glove - useful for precision component handling that still faces an A4 cut hazard.
How is it different from the 7030 and 7042?
All three are PU-coated; the 7044 is A4, sitting between the A3 7030 and the A5 7042. Choose the 7044 when the cut hazard is above A3 but the fingertip-feel needs rule out a thicker glove.
Are these chemical-resistant gloves?
No - the 7044 is a cut-resistant glove and is not rated for a chemical splash hazard. For solvents or acids, use dedicated chemical-resistant gloves selected by breakthrough time for the chemical.
How is it different from the nitrile A4 7041?
Both are A4; the 7044 uses a thin PU palm for tactile feel, while the 7041 uses foam nitrile for grip and abrasion. Choose the 7044 for precision, the 7041 for grip and visibility.
What sizes are available?
The listing shows Small, Medium, Large, X-Large, and 2X-Large. A snug fit preserves the dexterity precision work needs.
Does the PU grip oily parts?
The gray PU coating is optimized for clean, dry conditions; for lightly oily surfaces a nitrile coating grips better. Match the coating to the surface condition.
Do cut gloves stop punctures?
Cut resistance and puncture resistance are different ratings. The A4 rating covers slicing cut forces, not punctures; choose a puncture- or needle-rated glove for those hazards.
What work is it for?
Precision manufacturing, light fabrication, automotive assembly, and general industrial work needing A4 cut protection without the bulk of nitrile-coated options.
When should I replace them?
Replace the gloves when the PU coating wears through, the liner shows cuts or holes, or grip and fit degrade - worn gloves no longer deliver their rated protection.
How do I order for a team?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
Ergodyne
Model / SKU
7044-S
Product Type
Cut Resistant Gloves
Price
$9.59 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Ergodyne ProFlex 7044?
An ANSI/ISEA 105 A4 PU-coated cut-resistant glove on a 13-gauge shell. It bridges the A3 7030 and the A5 7042, offering A4 cut protection with the thin PU coating's tactile advantage over nitrile, for precision manufacturing and light fabrication.
What does A4 cut resistance mean?
A4 is an upper-mid-range cut-protection level on the ANSI/ISEA 105 A1-A9 scale, as listed. It suits stamped-metal handling and automotive glass above the A3 baseline but below the A5-plus levels.
Why PU at A4?
Polyurethane is thinner and more tactile than nitrile, so the 7044 keeps better fingertip sensitivity than a nitrile-coated A4 glove - useful for precision component handling that still faces an A4 cut hazard.
How is it different from the 7030 and 7042?
All three are PU-coated; the 7044 is A4, sitting between the A3 7030 and the A5 7042. Choose the 7044 when the cut hazard is above A3 but the fingertip-feel needs rule out a thicker glove.
Are these chemical-resistant gloves?
No - the 7044 is a cut-resistant glove and is not rated for a chemical splash hazard. For solvents or acids, use dedicated chemical-resistant gloves selected by breakthrough time for the chemical.
How is it different from the nitrile A4 7041?
Both are A4; the 7044 uses a thin PU palm for tactile feel, while the 7041 uses foam nitrile for grip and abrasion. Choose the 7044 for precision, the 7041 for grip and visibility.
What sizes are available?
The listing shows Small, Medium, Large, X-Large, and 2X-Large. A snug fit preserves the dexterity precision work needs.
Does the PU grip oily parts?
The gray PU coating is optimized for clean, dry conditions; for lightly oily surfaces a nitrile coating grips better. Match the coating to the surface condition.
Do cut gloves stop punctures?
Cut resistance and puncture resistance are different ratings. The A4 rating covers slicing cut forces, not punctures; choose a puncture- or needle-rated glove for those hazards.
What work is it for?
Precision manufacturing, light fabrication, automotive assembly, and general industrial work needing A4 cut protection without the bulk of nitrile-coated options.
When should I replace them?
Replace the gloves when the PU coating wears through, the liner shows cuts or holes, or grip and fit degrade - worn gloves no longer deliver their rated protection.
How do I order for a team?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.