What is the cut resistance level of the Ergodyne 7030 ProFlex A3 Cut-Resistant PU Palm Gloves 13g?

These gloves are rated to ANSI/ISEA 105 Level A3 (800g+). Appropriate for moderate cut risk: stamping, pressing, light glass handling. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the PU (polyurethane) coating on these gloves for?

The PU (polyurethane) coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion. PU coatings are thin, lightweight, and ideal for precision parts handling and dry conditions.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7030 PU Coated Cut Resistant Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7030 PU Coated Cut Resistant Work Gloves

Name: Ergodyne ProFlex 7030 PU Coated Cut Resistant Work Gloves
Brand: Ergodyne
SKU: 7030-S
Price: 8.79 USD
Availability: InStock

Ergodyne SKU: 7030-S Cut Resistant Gloves GTIN: 720476104629

★ ★ ★ ★ ★ 4.8

$6.49

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7030 PU Coated Cut Resistant Work Gloves The Ergodyne ProFlex 7030 is a PU (polyurethane) coated cut-resistant glove rated to ANSI A3. It occupies the middle ground between the lighter 7025 (A2) and h...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A3 Cut Resistant Ergodyne Gray ProFlex PU Coated Work Gloves

Ergodyne ProFlex 7030 PU Coated Cut Resistant Work Gloves

The Ergodyne ProFlex 7030 is a PU (polyurethane) coated cut-resistant glove rated to ANSI A3. It occupies the middle ground between the lighter 7025 (A2) and heavier nitrile-coated options — providing more cut protection than the 7025 while retaining the thin PU coating's tactile advantage over nitrile. Suited for assembly, light fabrication, and handling operations where A3 cut protection is required without sacrificing the tactile sensitivity needed for precision tasks. The 13-gauge shell maintains dexterity for small-parts handling.

Key Features

ANSI A3 Cut Resistance — Higher cut protection than the 7025; appropriate for sheet metal handling, light fabrication, and environments with A3-rated cut requirements.
PU Palm Coating — Thinner and more tactile than nitrile; maintains better sensitivity for precision handling compared to nitrile-coated alternatives at the same cut level.
13-Gauge Shell — Lightweight high-gauge knit for dexterity and extended comfort in assembly and inspection tasks.
Dry-Condition Grip — PU coating delivers reliable grip in clean, dry environments typical of light manufacturing and assembly.

Compliance

Meets ANSI/ISEA 105 A3 cut resistance. Suited for assembly, light fabrication, packaging, and precision handling requiring A3 cut protection with maximum tactile sensitivity.