What is the cut resistance level of the Ergodyne 7025 ProFlex A2 Cut-Resistant PU Palm Gloves 18g?

These gloves are rated to ANSI/ISEA 105 Level A2 (400g+). Good for general assembly, packaging, and light sheet metal handling. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the PU (polyurethane) coating on these gloves for?

The PU (polyurethane) coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion. PU coatings are thin, lightweight, and ideal for precision parts handling and dry conditions.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7025 PU Coated Cut Resistant Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7025 PU Coated Cut Resistant Work Gloves

Name: Ergodyne ProFlex 7025 PU Coated Cut Resistant Work Gloves
Brand: Ergodyne
SKU: 7025-S
Price: 10.93 USD
Availability: InStock

Ergodyne SKU: 7025-S Cut Resistant Gloves GTIN: 0720476104322

★ ★ ★ ★ ★ 4.8

$6.79

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7025 PU Coated Cut Resistant Work Gloves The Ergodyne ProFlex 7025 is a PU (polyurethane) coated cut-resistant glove rated to ANSI A2, designed for precision assembly, electronics handling, and inspec...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

ANSI A2 Blue Cut Resistant Ergodyne ProFlex PU Coated Work Gloves

Ergodyne ProFlex 7025 PU Coated Cut Resistant Work Gloves

The Ergodyne ProFlex 7025 is a PU (polyurethane) coated cut-resistant glove rated to ANSI A2, designed for precision assembly, electronics handling, and inspection work requiring tactile sensitivity alongside light cut protection. Polyurethane coating is thinner and more tactile-transparent than nitrile, allowing workers to feel small parts and fine details through the glove while maintaining cut and abrasion resistance at the palm. The blue color provides clear visual contrast for quality inspection environments where glove fragment detection matters.

Key Features

ANSI A2 Cut Resistance — Provides protection against box cutters, sheet material edges, and light-to-medium cut hazards in assembly and handling environments.
PU Palm Coating — Polyurethane is thinner than nitrile, delivering superior tactile sensitivity for small-parts handling, electronics assembly, and inspection tasks.
Blue Color — Provides visual contrast for contamination detection in food processing, clean rooms, and quality inspection environments.
13-Gauge Shell — Lightweight high-gauge construction minimizes bulk and maximizes dexterity for precision work.

Compliance

Meets ANSI/ISEA 105 A2 cut resistance. Suited for electronics assembly, light manufacturing, inspection, and applications requiring both tactile sensitivity and cut protection.