🔍 Click to zoom
Petzl ABSORBICA-Y 80 MGO Shock Absorbing Fall Arrest Lanyard
EDITORIAL REVIEW: 4.7/5 — WC Safety Review of the Petzl ABSORBICA-Y 80 MGO, a premium Y-lanyard with large-opening connectors. Editorial assessment by Steven Eaton, WC Safety editor, based on published Petzl specifi...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.7/5 — WC Safety Review of the Petzl ABSORBICA-Y 80 MGO, a premium Y-lanyard with large-opening connectors.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Petzl specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Petzl specifications and category fit. We did not laboratory-test this product.
The Petzl ABSORBICA-Y 80 MGO is a premium twin-leg (Y-leg) shock-absorbing fall-arrest lanyard with 80 cm arms and MGO large-opening metal connectors on each arm, whose wider gate makes clipping to anchor rings, scaffold pipe, and structural steel faster, even with gloves. Rated for workers up to 310 lb, it meets ANSI Z359.13 and EN 355 as listed.
CHECK PRICE ON AMAZON → SHOP LANYARDS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Petzl ABSORBICA-Y 80 earns its place at height
When you are on a tower or a wind turbine, clipping and unclipping dozens of times a shift, the connector matters as much as the absorber. Petzl's MGO large-opening connectors give a wider gate than a standard snap hook, so each arm clips faster to anchor rings, scaffold pipe, and structural steel — a real advantage with gloves or in poor visibility. The twin 80 cm arms give true 100% tie-off, and the listing states compliance with both ANSI Z359.13 and EN 355. As lanyards go, this is the premium work-at-height pick, and the best fall protection lanyards guide and fall protection equipment guide cover how the pieces fit. It is built for demanding vertical work.
Safety first: this lanyard is only one component of a complete personal fall arrest system — pair it with a compatible full-body harness at the dorsal D-ring and anchors rated for at least 5,000 lb. The twin arms give continuous connection, but you still must calculate fall clearance: free fall based on the 80 cm arm length, the deployed absorber length, D-ring height, and a safety factor. It is rated to 310 lb and, as listed, meets ANSI Z359.13 and EN 355. Retire the lanyard after any fall. Confirm requirements with the OSHA 1926 fall protection guide.
What the Petzl ABSORBICA-Y 80 listing documents
From the published specs: a twin-leg (Y-leg) design; 80 cm arms; MGO large-opening connectors on each arm and a center MGO connector; a capacity up to 310 lb; and ANSI Z359.13 / EN 355 compliance as listed. These are true y-leg lanyard credentials and a genuine mgo connector lanyard — a premium 100% tie-off lanyard for vertical work.
How the Petzl ABSORBICA-Y 80 compares to other lanyards
For the longer-arm Petzl, the Petzl ABSORBICA-Y 150; for a carabiner twin-leg, the Elk River 35416 or adjustable Elk River 35417; for other 100% tie-off, the FallTech 8259Y or Guardian 01230; and for the heavyweight Y-leg, the FallTech Ironman. The safety harness guide pairs the harness.
Building a complete fall arrest system
A lanyard is one of three parts. For the harness, the full-body harnesses collection; for anchors, the anchor points collection and roof anchors guide; for complete sets, the fall protection kits collection and kits guide; and the full fall protection collection, the lanyards and lifelines collection, plus self-retracting lifelines span every category.
Where it fits by job and crew orders
The ABSORBICA-Y 80 suits rope-access technicians, tower and wind crews, and bridge workers who clip constantly and value fast, glove-friendly connectors — compare tool-lanyard options in the tool lanyards collection for dropped-object control. Match the arm length to your reach, verify each anchor, and retire the lanyard after any fall. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Petzl ABSORBICA-Y 80 MGO?
A premium twin-leg (Y-leg) shock-absorbing fall-arrest lanyard from Petzl with 80 cm arms and MGO large-opening connectors on each arm. It is rated for workers up to 310 lb and meets ANSI Z359.13 and EN 355 as listed.
What is an MGO connector?
MGO is Petzl's large-opening metal connector - its wider gate opening makes it faster to clip to anchor rings, scaffold pipe, and structural steel than a standard snap hook, which is especially valuable when wearing gloves or working in poor visibility.
What does the 80 in the name mean?
The listing states each arm of the Y-lanyard is 80 cm long. This is the shorter-arm version in Petzl's ABSORBICA-Y range; confirm the arm length suits your reach and clearance before use.
What is 100% tie-off?
With the twin Y-leg design, one arm stays clipped to the current anchor while you move the other to the next anchor before releasing the first - so you are never disconnected while moving on structure.
What standards does it meet?
The listing states it meets both the US ANSI Z359.13 standard for shock-absorbing lanyards and the European EN 355 standard, reflecting Petzl's work-at-height and rope-access heritage.
What is the capacity?
The listing states it is rated for workers up to 310 lb (140 kg), which should include the combined weight of the worker plus tools and equipment.
How is it different from the ABSORBICA-Y 150?
Both are Petzl MGO Y-lanyards; the 80 has 80 cm arms for tighter reach, while the 150 has longer 150 cm arms. Choose the arm length that matches your work positioning and clearance.
What harness and anchor do I need?
Connect the center MGO connector to the dorsal D-ring of a compatible full-body harness and each arm's MGO connector to a certified anchor or structural member. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall based on the arm length, the deployed shock-absorber length, D-ring height, and a safety factor. The clearance math applies to whichever arm arrests the fall.
What work is it for?
Rope access, telecom towers, wind turbines, bridges, offshore platforms, and construction where demanding vertical environments call for premium fall-protection hardware.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, or connectors show cuts, burns, corrosion, or deformation. Inspect before every use.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
Petzl
Model / SKU
—
Product Type
Lanyard
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Petzl ABSORBICA-Y 80 MGO?
A premium twin-leg (Y-leg) shock-absorbing fall-arrest lanyard from Petzl with 80 cm arms and MGO large-opening connectors on each arm. It is rated for workers up to 310 lb and meets ANSI Z359.13 and EN 355 as listed.
What is an MGO connector?
MGO is Petzl's large-opening metal connector - its wider gate opening makes it faster to clip to anchor rings, scaffold pipe, and structural steel than a standard snap hook, which is especially valuable when wearing gloves or working in poor visibility.
What does the 80 in the name mean?
The listing states each arm of the Y-lanyard is 80 cm long. This is the shorter-arm version in Petzl's ABSORBICA-Y range; confirm the arm length suits your reach and clearance before use.
What is 100% tie-off?
With the twin Y-leg design, one arm stays clipped to the current anchor while you move the other to the next anchor before releasing the first - so you are never disconnected while moving on structure.
What standards does it meet?
The listing states it meets both the US ANSI Z359.13 standard for shock-absorbing lanyards and the European EN 355 standard, reflecting Petzl's work-at-height and rope-access heritage.
What is the capacity?
The listing states it is rated for workers up to 310 lb (140 kg), which should include the combined weight of the worker plus tools and equipment.
How is it different from the ABSORBICA-Y 150?
Both are Petzl MGO Y-lanyards; the 80 has 80 cm arms for tighter reach, while the 150 has longer 150 cm arms. Choose the arm length that matches your work positioning and clearance.
What harness and anchor do I need?
Connect the center MGO connector to the dorsal D-ring of a compatible full-body harness and each arm's MGO connector to a certified anchor or structural member. The lanyard alone is not a complete system.
How much fall clearance do I need?
Calculate total fall clearance before work: free fall based on the arm length, the deployed shock-absorber length, D-ring height, and a safety factor. The clearance math applies to whichever arm arrests the fall.
What work is it for?
Rope access, telecom towers, wind turbines, bridges, offshore platforms, and construction where demanding vertical environments call for premium fall-protection hardware.
When must it be retired?
Retire the lanyard immediately after it arrests a fall - the absorber is spent - or if the webbing, stitching, or connectors show cuts, burns, corrosion, or deformation. Inspect before every use.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.