MCR Safety 92743LTS CutPro A8 Crinkle Latex Gloves — Small

The MCR Safety 92743LTS CutPro A8 Crinkle Latex Gloves in Small deliver ANSI/ISEA 105 A8 cut protection for workers in heavy metal fabrication, stamping operations, scrap metal handling, and glass processing. Built on a 13-gauge HyperMax HPPE shell with a crinkle latex palm coating, these gloves are engineered for environments where a single slip against a sharp edge or burr can cause a serious laceration. The A8 cut rating — the second-highest level in the ANSI/ISEA 105 standard — means the 92743LT series is trusted by safety managers in steel service centers, automotive stamping facilities, and glass manufacturing plants who need reliable hand protection without sacrificing the dexterity required to handle small components or operate machinery controls.

Key Features

• ANSI/ISEA 105 A8 Cut Resistance: HyperMax HPPE fiber construction achieves the A8 cut level, protecting against blades, sheet metal edges, and glass shards at a level appropriate for the most demanding fabrication environments.
• 13-Gauge Knit Shell: Fine 13-gauge construction balances cut protection with tactile sensitivity, allowing workers to feel part edges and maintain control of workpieces.
• Crinkle Latex Palm Coating: The textured crinkle latex finish delivers excellent wet and dry grip, channeling fluids away from the palm surface and maintaining secure contact with oily or coolant-covered metal parts.
• Small Sizing (Size 7): Precision fit for hands measuring approximately 7 inches in circumference, reducing bunching at the fingertips that can lead to pinch-point injuries on stamping equipment.
• Seamless Knit Construction: No interior seams means no pressure points or abrasion hot spots during extended wear shifts.
• Breathable HPPE Liner: HyperMax HPPE fiber wicks moisture and remains comfortable during high-exertion tasks, reducing hand fatigue on repetitive stamping or press-feeding operations.
• EN 388 Compliant: Meets international mechanical risk standards in addition to ANSI/ISEA 105, suitable for facilities with global safety compliance requirements.

Detailed Description

The MCR Safety CutPro 92743LT series represents the upper tier of MCR Safety's cut-protection portfolio. The 92743LTS is the Small variant (size 7), designed for workers whose hands fall in the 7-inch circumference range — a fit that is critical in cut-hazard environments because an oversized glove can catch on press tooling, conveyor edges, or sharp banding straps.

The glove's shell is knitted from HyperMax HPPE (High-Performance Polyethylene), a fiber MCR Safety engineered for exceptional cut resistance per unit of weight. Unlike steel or fiberglass blended yarns, HyperMax HPPE remains soft against the skin and does not cause the fiber-shedding irritation associated with some A8-rated competitors. The 13-gauge knit density is fine enough to preserve the feel of part edges and fastener threads, which is important in metal fabrication where workers must distinguish between acceptable and out-of-tolerance surfaces by touch.

The crinkle latex coating is applied to the palm and fingers, stopping at the back-of-hand to preserve breathability. The crinkle texture creates micro-channels that displace coolant, cutting oil, and water, maintaining grip coefficient even when workpieces are thoroughly lubricated. Latex coatings, compared to nitrile alternatives, provide superior elasticity and conform tightly to finger contours, which translates to better tactile feedback when handling small stampings, hardware, or glass panes.

From a compliance standpoint, the A8 rating is appropriate for facilities that have conducted hand injury risk assessments and identified high-energy cutting hazards — stamping dies, slitting blades, sharp-edged scrap bins, and raw glass sheets. Safety managers selecting PPE for these hazard classes should verify that their glove program specifies at least A6; the 92743LT exceeds that threshold with A8 performance, providing a meaningful margin of protection.

Applications and Use Cases

• Metal Stamping and Press Operations: Workers feeding blanks into stamping presses encounter sharp die edges and freshly cut metal blanks. The A8 rating and snug Small fit reduce both laceration and entanglement risk.
• Sheet Metal Fabrication: Handling sheared, laser-cut, or plasma-cut steel and aluminum panels where edges remain sharp and burrs are common.
• Scrap Metal Handling and Sorting: Scrap pieces with irregular, jagged profiles demand maximum cut resistance. The crinkle latex maintains grip on slippery or oily scrap.
• Glass Manufacturing and Processing: Flat glass, tempered glass panels, and glass tube handling where cut hazards are severe and consistent grip is essential to prevent drops.
• Automotive Parts Assembly: Handling stamped body panels, brackets, and trim components that arrive from suppliers with sharp edges before deburring.
• Steel Service Centers: Receiving, sorting, and processing coiled or cut-to-length steel where coil edges and slit edges pose laceration hazards.
• Appliance Manufacturing: Sheet metal cabinet assembly where workers regularly contact cut flanges, formed edges, and internal sheet metal components.

Specifications

Related Products

• Shop All Cut-Resistant Gloves — Full range of ANSI A2 through A9 cut-protection gloves for every hazard level.
• Work Gloves — General-purpose and task-specific work gloves for industrial and construction use.
• Safety Gloves — Browse the complete safety glove assortment including impact, chemical, and thermal protection.
• Hand Protection — Comprehensive hand protection solutions including gloves, sleeves, and barrier creams.
• MCR Safety Products — Full MCR Safety product line including eye protection, rain gear, and high-visibility apparel.
• Leather Work Gloves — Premium leather driver, utility, and welding gloves for heavy-duty applications.