Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut

The Ergodyne ProFlex 7021 Hi-Vis Nitrile Coated Work Gloves provide ANSI/ISEA 105-2016 Level A3 cut resistance with high-visibility lime shell and nitrile palm coating — offering a mid-range cut protection level in a hi-vis construction for construction, infrastructure, and industrial workers who need cut protection above the A2 baseline for more demanding material-handling operations while maintaining the hand visibility benefits of hi-vis PPE in high-traffic equipment environments. Level A3 positions the 7021 between the A2 baseline and the A4 upper-mid cut levels — appropriate for operations where the documented cut hazard from the specific materials handled (conduit, heavier wire mesh, reinforcing materials, structural components with moderate cut force) exceeds the A2 protection level but does not require the full A4 rating of heavy structural fabrication and rebar work. The hi-vis lime shell delivers the worker visibility advantage that is the distinguishing feature of the 7021 and 7022 hi-vis designs: in construction site and infrastructure environments where cranes, excavators, and heavy equipment operate alongside ground workers, visible hands communicate intent and position to equipment operators at distances where standard-colored gloves blend into construction material backgrounds. Nitrile palm coating provides grip on construction materials and tool handles in the range of surface conditions typical of construction and infrastructure work. Safety programs specifying hand protection for construction workers who handle mid-level cut-hazard materials in equipment-active environments — where A3 cut addresses the specific materials in the hazard assessment — specify the 7021 as the hi-vis cut-certified hand protection for those operations.

Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves A3 Cut — Key Features

• ANSI/ISEA 105-2016 Level A3 cut resistance — mid-range cut protection for conduit, wire mesh, and moderate cut-force materials
• Hi-vis lime shell — enhanced hand visibility in construction and equipment-active environments
• Nitrile palm coating — grip for tools and materials in construction applications
• Mid-level cut specification — above A2 baseline for higher-demand construction material handling

Specifications

A3 Cut Level: The Mid-Range Selection for Construction Material Handling

A3 cut resistance sits between A2 (baseline general industry) and A4 (upper mid-range structural work) on the ANSI/ISEA scale — representing a cut protection level appropriate for a specific set of construction and industrial materials that the hazard assessment identifies as requiring above-A2 protection without the full A4 specification. Electrical conduit (rigid and flexible) handling in electrical construction, heavier-gauge wire mesh for reinforcement applications, precast concrete form hardware, and moderate-gauge metal components in construction all fall in the A3 specification range for many safety program hazard assessments. Where a program has established A2 as the baseline for general material handling and A4 for heavy structural work, A3 fills the intermediate tier for the operations that fall between these poles. The hi-vis construction provides the equipment-environment visibility benefit across all cut level tiers — making the 7021 (A3, hi-vis) the specification for A3 cut exposure in equipment-active construction areas where hand visibility is a concurrent requirement to cut protection. Safety programs that have segmented their cut resistance specifications by operation type may specify the 7021 for the A3 intermediate tier alongside A2 (7022) and A4 (7141) specifications across different task groups on the same site.

Compliance and Certifications

• ANSI/ISEA 105-2016 — Cut resistance Level A3
• OSHA 29 CFR 1910.138 — Hand protection requirements

Real-World Benefits

A3 cut protection provides the right protection level for conduit, wire mesh, and moderate cut-force construction materials without over-specifying to A4 for materials that don't require it. Electricians handling rigid conduit, mesh installers working with reinforcement wire mesh, and construction workers with documented A3 cut exposure receive correctly matched protection level — not the over-specification and reduced dexterity of a higher cut level than the documented hazard requires.

Hi-vis lime construction maintains hand visibility for workers in equipment-active construction environments at the A3 cut specification level. Construction workers who need A3 cut protection in crane, forklift, and heavy equipment operating areas receive the same hi-vis visibility advantage as the A2 7022 — matching the cut level to the actual hazard while maintaining the visibility standard appropriate for the work environment.

Applications and Use Cases

• Electrical construction — conduit handling and installation — 7021 for electricians handling rigid metal conduit and pulling wire in construction and industrial electrical work with A3-level cut exposure
• Reinforcement and precast concrete work — wire mesh installation — hi-vis A3 cut gloves for concrete workers handling wire mesh, form hardware, and reinforcement materials in active construction areas with equipment hazard
• General construction in equipment-active areas — A3 documented materials — hi-vis cut-resistant gloves for construction laborers with documented A3 cut material exposure in site areas with crane and heavy equipment activity

Related Products

For A2 hi-vis with DSX dry grip, see Ergodyne ProFlex 7022 Hi-Vis Cut-Resistant Gloves — A2. For A4 hi-vis with Level 1 impact, see Ergodyne ProFlex 7141 Hi-Vis Cut-Resistant Impact Gloves — A4. Browse the complete Hand Protection collection.

Frequently Asked Questions

How do I determine whether my operation requires A2, A3, or A4 cut protection?

Cut level selection should be based on a documented hand hazard assessment — identifying the specific materials handled, the cutting forces they generate under expected contact conditions, and mapping those forces to the ANSI/ISEA 105-2016 cut level thresholds. Use 3M or ANSI/ISEA cut level selection guides, consult your glove supplier's application specialists, or conduct testing using the standardized cut resistance measurement process on the specific materials in your operation. Avoid selecting cut levels by intuition or precautionary over-specification — A4 and A5 gloves have higher material cost, reduced dexterity, and higher heat retention than A2 and A3 designs, and over-specifying creates unnecessary compliance resistance and ergonomic issues without providing proportional protection benefit for materials that don't require the higher level.