Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut Review (2026)

7021 proflex hi-vis nitrile work gloves, a3 cut review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut is a safety gloves from Ergodyne, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The Ergodyne ProFlex 7021 Hi-Vis Nitrile Coated Work Gloves provide ANSI/ISEA 105-2016 Level A3 cut resistance with high-visibility lime shell and nitrile palm coating — offering a mid-range cut protection level in a hi-vis construction for construction, infrastructure, and industrial workers who need cut protection above the A2 baseline for more demanding material-handling operations while maintaining the hand visibility benefits of hi-vis PPE in high-traffic equipment environments. Level A3 positions the 7021 between the A2 baseline and the A4 upper-mid cut levels — appropriate for operations where the documented cut hazard from the specific materials handled (conduit, heavier wire mesh, reinforcing materials, structural components with moderate cut force) exceeds the A2 protection level but does not require the full A4 rating of heavy structural fabrication and rebar work. The hi-vis lime shell delivers the worker visibility advantage that is the distinguishing feature of the 7021 and 7022 hi-vis designs: in construction site and infrastructure environments where cranes, excavators, and heavy equipment operate alongside ground workers, visible hands communicate intent and position to equipment operators at distances where standard-colored gloves blend into construction material backgrounds. Nitrile palm coating provides grip on construction materials and tool handles in the range of surface conditions typical of construction and infrastructure work. Safety programs specifying hand protection for construction workers who handle mid-level cut-hazard materials in equipment-active environments — where A3 cut addresses the specific materials in the hazard assessment — specify the 7021 as the hi-vis cut-certified hand protection for those operations.

A3 cut resistance sits between A2 (baseline general industry) and A4 (upper mid-range structural work) on the ANSI/ISEA scale — representing a cut protection level appropriate for a specific set of construction and industrial materials that the hazard assessment identifies as requiring above-A2 protection without the full A4 specification. Electrical conduit (rigid and flexible) handling in electrical construction, heavier-gauge wire mesh for reinforcement applications, precast concrete form hardware, and moderate-gauge metal components in construction all fall in the A3 specification range for many safety program hazard assessments. Where a program has established A2 as the baseline for general material handling and A4 for heavy structural work, A3 fills the intermediate tier for the operations that fall between these poles. The hi-vis construction provides the equipment-environment visibility benefit across all cut level tiers — making the 7021 (A3, hi-vis) the specification for A3 cut exposure in equipment-active construction areas where hand visibility is a concurrent requirement to cut protection. Safety programs that have segmented their cut resistance specifications by operation type may specify the 7021 for the A3 intermediate tier alongside A2 (7022) and A4 (7141) specifications across different task groups on the same site.

A3 cut protection provides the right protection level for conduit, wire mesh, and moderate cut-force construction materials without over-specifying to A4 for materials that don't require it. Electricians handling rigid conduit, mesh installers working with reinforcement wire mesh, and construction workers with documented A3 cut exposure receive correctly matched protection level — not the over-specification and reduced dexterity of a higher cut level than the documented hazard requires.

Where It Earns Its Slot

Where it earns its slot: The Ergodyne ProFlex 7021 Hi-Vis Nitrile Coated Work Gloves provide ANSI/ISEA 105-2016 Level A3 cut resistance with high-visibility lime shell and nitrile palm coating — offering a mid-range cut protection level in a hi-. Everything below measures the product against that role: its honest limits, its true alternatives, and where the linked guides rank it.

Honest Limits

The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

How much does the Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut listing actually document?

The Ergodyne ProFlex 7021 Hi-Vis Nitrile Coated Work Gloves provide ANSI/ISEA 105-2016 Level A3 cut resistance with high-visibility lime shell and nitrile palm coating — offering a mid-range cut protection level in a hi-vis construction for construction, infrastructure, and industrial workers who ne…

What are the alternatives to the Ergodyne 7021 ProFlex Hi-Vis Nitrile Work Gloves, A3 Cut?

The sibling safety gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.