🔍 Click to zoom
MCR Safety 92743LT CutPro A8 Crinkle Latex Cut-Resistant Gloves
Size: S
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the MCR Safety 92743LT CutPro, a very-high-cut glove with a grippy crinkle latex palm. Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Saf...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the MCR Safety 92743LT CutPro, a very-high-cut glove with a grippy crinkle latex palm.
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
The MCR Safety 92743LT CutPro is an ANSI/ISEA 105 A8 cut-resistant glove — the second-highest cut level — built on a 13-gauge HyperMax HPPE shell with a crinkle latex palm coating for wet and dry grip in heavy metal fabrication, stamping, scrap, and glass work. It pairs near-top cut protection with a palm that holds on oily, coolant-covered parts.
CHECK PRICE ON AMAZON → SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the MCR Safety 92743LT grips where the cut hazard is worst
Heavy fabrication and stamping generate two problems at once: severe cut hazard and slick, coolant-covered parts you have to hold securely. The 92743LT answers both — an A8 liner, the second-highest cut level there is, on a 13-gauge HyperMax HPPE shell, finished with a crinkle latex palm that channels fluids away and grips oily metal. The seamless knit keeps it comfortable all shift while you feel part edges. As cut-resistant gloves go, this is the high-cut wet-grip pick, and the best cut-resistant gloves guide and complete cut-glove guide cover how to match glove to task. It holds tight where a slip means a laceration.
Safety first: the 92743LT's palm coating is crinkle natural rubber latex, so a worker with a latex allergy should choose a non-latex-coated cut glove instead — natural rubber latex can cause allergic reactions on contact. It is a cut glove, not a chemical glove: for solvents or acids, wear dedicated chemical-resistant gloves and see the chemical-resistant gloves guide. A8 is a lot of glove — reserve it for severe hazards using the ANSI A1-A9 cut-level guide. Cut resistance is not puncture resistance. Replace worn gloves.
What the MCR Safety 92743LT listing documents
From the published specs: ANSI/ISEA 105 A8 cut resistance; a 13-gauge HyperMax HPPE seamless shell; a crinkle latex palm coating for wet and dry grip; and a Small-through-2X-Large size range. These are true a8 cut resistant gloves credentials and a genuine set of crinkle latex gloves — grippy hppe cut gloves for heavy fabrication. The design pairs top-tier cut protection with wet-metal grip.
How the MCR Safety 92743LT compares to other gloves
For a latex-free A7 cut glove, the Ergodyne ProFlex 7072 or 7070; for A5 cut, the 7042 or food-grade 7040; and for the high-cut comparison, the best A5 cut-glove guide and A4-vs-A5 guide. The nitrile-vs-latex guide covers the coating choice.
Choosing the right glove for the hazard
Match cut level and coating to the task and any latex sensitivity. For coating families, browse the nitrile gloves and mechanics gloves collections; for impact hazards, the impact-resistant gloves and cut-vs-impact guide; and for the bench, the mechanics cut-glove guide.
Where it fits by job and team orders
The 92743LT suits steel service centers, automotive stamping plants, scrap handlers, and glass processors facing severe cut hazards on wet, oily parts. Keep a latex-free cut glove for latex-sensitive workers, reserve A8 for the tasks that need it, size the glove snug for control, and replace worn pairs promptly once the coating wears. Where a nitrile or PU palm is preferred over latex, the nitrile-vs-PU coating guide helps pick a comparable latex-free A-level. For team orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the MCR Safety 92743LT CutPro?
An ANSI/ISEA 105 A8 cut-resistant glove built on a 13-gauge HyperMax HPPE shell with a crinkle latex palm coating. It is engineered for heavy metal fabrication, stamping, scrap metal handling, and glass processing where lacerations are a serious risk.
What does A8 cut resistance mean?
A8 is the second-highest cut-protection level in the ANSI/ISEA 105 standard, as listed. It protects against blades, sheet-metal edges, and glass shards at a level appropriate for the most demanding fabrication environments.
Does it contain latex?
Yes - the palm coating is crinkle natural rubber latex. Workers sensitive to latex should choose a non-latex-coated cut glove instead, since natural rubber latex can cause allergic reactions.
What does the crinkle latex palm do?
The textured crinkle latex finish channels fluids away from the palm surface and maintains secure grip on oily or coolant-covered metal parts in wet and dry handling.
What is the HyperMax HPPE shell?
A 13-gauge High Performance Polyethylene fiber knit that achieves the A8 cut level while keeping enough tactile sensitivity to feel part edges and control workpieces.
Are these chemical-resistant gloves?
No - the 92743LT is a cut-resistant glove and is not rated for a chemical splash hazard. For solvents or acids, use dedicated chemical-resistant gloves selected by breakthrough time for the chemical.
What sizes does this cover?
This listing covers Small (size 7) through 2X-Large. A precision fit reduces bunching at the fingertips that can lead to pinch-point injuries on stamping equipment.
What is the seamless knit for?
A seamless knit means no interior seams, so there are no pressure points or abrasion hot spots during extended wear - important for all-shift comfort in fabrication.
Do cut gloves stop punctures?
Cut resistance and puncture resistance are different ratings. The A8 rating covers slicing cut forces, not punctures; choose a puncture- or needle-rated glove for those hazards.
Is A8 needed for general work?
Usually not - very high cut levels add stiffness. Reserve A8 for the most severe cut hazards and use a lower level for general handling to keep dexterity where the hazard allows.
When should I replace them?
Replace the gloves when the latex coating wears or cracks, the liner shows cuts or holes, or grip and fit degrade - worn gloves no longer deliver their rated protection.
How do I order for a team?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed MCR Safety 92743LT CutPro A8 Crinkle Latex Cut-Resistant Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
MCR Safety
Model / SKU
92743LTS
Product Type
Cut Resistant Gloves
Condition
New
MPN
92743LTS
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the MCR Safety 92743LT CutPro?
An ANSI/ISEA 105 A8 cut-resistant glove built on a 13-gauge HyperMax HPPE shell with a crinkle latex palm coating. It is engineered for heavy metal fabrication, stamping, scrap metal handling, and glass processing where lacerations are a serious risk.
What does A8 cut resistance mean?
A8 is the second-highest cut-protection level in the ANSI/ISEA 105 standard, as listed. It protects against blades, sheet-metal edges, and glass shards at a level appropriate for the most demanding fabrication environments.
Does it contain latex?
Yes - the palm coating is crinkle natural rubber latex. Workers sensitive to latex should choose a non-latex-coated cut glove instead, since natural rubber latex can cause allergic reactions.
What does the crinkle latex palm do?
The textured crinkle latex finish channels fluids away from the palm surface and maintains secure grip on oily or coolant-covered metal parts in wet and dry handling.
What is the HyperMax HPPE shell?
A 13-gauge High Performance Polyethylene fiber knit that achieves the A8 cut level while keeping enough tactile sensitivity to feel part edges and control workpieces.
Are these chemical-resistant gloves?
No - the 92743LT is a cut-resistant glove and is not rated for a chemical splash hazard. For solvents or acids, use dedicated chemical-resistant gloves selected by breakthrough time for the chemical.
What sizes does this cover?
This listing covers Small (size 7) through 2X-Large. A precision fit reduces bunching at the fingertips that can lead to pinch-point injuries on stamping equipment.
What is the seamless knit for?
A seamless knit means no interior seams, so there are no pressure points or abrasion hot spots during extended wear - important for all-shift comfort in fabrication.
Do cut gloves stop punctures?
Cut resistance and puncture resistance are different ratings. The A8 rating covers slicing cut forces, not punctures; choose a puncture- or needle-rated glove for those hazards.
Is A8 needed for general work?
Usually not - very high cut levels add stiffness. Reserve A8 for the most severe cut hazards and use a lower level for general handling to keep dexterity where the hazard allows.
When should I replace them?
Replace the gloves when the latex coating wears or cracks, the liner shows cuts or holes, or grip and fit degrade - worn gloves no longer deliver their rated protection.
How do I order for a team?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.