What is the cut resistance level of the Ergodyne 7141 ProFlex Hi-Vis Cut-Resistant Impact Gloves, A4?

These gloves are rated to an ANSI/ISEA 105 cut level rated for the application described in the product title. Refer to the product listing for the specific ANSI cut rating. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the a coated coating on these gloves for?

The a coated coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7141 Nitrile Dipped Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7141 Nitrile Dipped Work Gloves

Name: Ergodyne ProFlex 7141 Nitrile Dipped Work Gloves
Brand: Ergodyne
SKU: 7141-S
Price: 22.99 USD
Availability: InStock

Ergodyne SKU: 7141-S Safety Gloves GTIN: 0720476179122

★ ★ ★ ★ ★ 4.8

$15.51

Final price set by Amazon · may vary

Size: Small

Ergodyne ProFlex 7141 Nitrile Dipped Work Gloves The Ergodyne ProFlex 7141 is a breathable nitrile-dipped work glove designed for general industrial tasks requiring cut protection with better breathability than foam n...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

Breathable Cut Resistant Ergodyne Green Lime Nitrile Dipped ProFlex Safety Gloves

Ergodyne ProFlex 7141 Nitrile Dipped Work Gloves

The Ergodyne ProFlex 7141 is a breathable nitrile-dipped work glove designed for general industrial tasks requiring cut protection with better breathability than foam nitrile alternatives. The cut-resistant liner shell provides A4-level protection from sharp edges while the nitrile palm dip delivers grip in dry and lightly oily conditions. A breathable dorsal knit allows moisture to escape, reducing heat buildup during sustained wear. The green/lime color provides visibility in busy work environments.

Key Features

Cut Resistant Liner — High-performance A4-rated cut resistant shell protects against sharp metal edges, box knives, and glass.
Nitrile Palm Dip — Provides cut resistance, grip, and abrasion protection on the working surfaces without adding excessive bulk.
Breathable Dorsal — Open-knit back of hand construction allows airflow to reduce heat and moisture buildup during extended wear.
Lightweight 13-Gauge Shell — High-gauge construction maintains tactile feedback and dexterity for precision handling.

Compliance

Meets ANSI/ISEA 105 A4 cut resistance. Suited for assembly, packaging, light fabrication, and general industrial work where breathability and cut protection are both required.