GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and M/L Review (2026)
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | GVS |
|---|---|
| Category | Respirator Filter |
| Typical price | $32.47 |
| Model / SKU | SPR486 |
The GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and M/L is a respirator filter from GVS, stocked at $32.47. This review restates what the product page documents, places it in its respiratory protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
The GVS SPR486 is a NIOSH-approved P100/multigas combination replacement filter for the GVS Elipse low-profile half-face respirator — integrating P100 particulate filtration (99.97% efficiency) with multigas chemical vapor protection in a single filter pair. The SPR486 fits both Small/Medium and Medium/Large Elipse facepiece sizes at $32.47 per pair, and is the combination particulate-plus-multigas specification for Elipse users whose environments present simultaneous high-hazard particulate and broad-spectrum chemical vapor hazards. For the complete filter and cartridge selection, see the respirator filters and cartridges collection .
The SPR486 combines P100 electrostatically charged particulate filter media with the multigas chemical sorbent used in GVS's Elipse Integra filter line. The P100 layer achieves 99.97% minimum efficiency against oil and non-oil-based aerosols, satisfying the highest NIOSH particulate filter class and the OSHA P100 mandate for lead, asbestos, cadmium, arsenic, and MDA regulated-carcinogen environments. The multigas sorbent provides chemical vapor protection across multiple gas classes within GVS's NIOSH approval scope — broader coverage than a standard single-category OV cartridge. The specific compounds covered must be verified against the site chemical inventory using GVS's NIOSH approval documentation before deployment. Both protection layers are integrated into the low-profile Elipse cartridge body, maintaining the respirator's safety glasses and over-mask equipment compatibility. The SPR486 fits both S/M and M/L Elipse facepiece sizes.
The GVS SPR486 is NIOSH-approved under 42 CFR Part 84 for P100 particulate filtration and the multigas chemical classes within its approval scope. The P100 component meets OSHA's P100 requirement for regulated carcinogens under the applicable substance-specific standards. The multigas chemical sorbent service life must be established from GVS's published service life data — chemical sorbent reaches breakthrough before P100 media saturates, making the chemical change-out schedule the governing replacement interval. OSHA 29 CFR 1910.134 fit testing, medical evaluation, and written respiratory protection program requirements apply. The SPR486 is compatible only with GVS Elipse respirators.
Where It Earns Its Slot
Where it earns its slot: The GVS SPR486 is a NIOSH-approved P100/multigas combination replacement filter for the GVS Elipse low-profile half-face respirator — integrating P100 particulate filtration (99.97% efficiency) with multigas chemical vap… The product page carries the full documented configuration; this review deliberately restates rather than embellishes it — claims beyond the listing don't appear here.
Honest Limits
Its honest limits: like every respiratory protection product, it protects within its stated ratings and use lane only — the family FAQ below draws those boundaries, and the guides linked underneath rank it against its true alternatives. Where the listing is silent on a spec, so are we; verify markings and instructions on arrival.
Pros and Cons
Pros
- Documented respirator filter from GVS
- Model SPR486 — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- 3M 6001 Organic Vapor Cartridge — 3M Bayonet Respirator Filt
- 3M 6002 Acid Gas Respirator Cartridge
- 3M 6003 Organic Vapor and Acid Gas Respirator Cartridge
- 3M 6004 Ammonia and Methylamine Respirator Cartridge
- 3M 6005 Formaldehyde and Organic Vapor Respirator Cartridge
- 3M 6006 Multi Gas and Vapor Respirator Cartridge
- 3M 2091 P100 Respirator Filter
- 3M 2096 P100 Respirator Filter Nuisance Acid Gas
- 3M 2097 P100 Respirator Filter Nuisance Organic Vapor
Respiratory Protection Guides
- When Do You Need a Respirator?
- Best Respirator for Welding Fumes
- OV vs OV/AG vs Multi-Gas Cartridges
- Best N95 for Construction
- Best Multi-Gas P100 Cartridge
Browse by Category
- Respiratory Protection
- Filters & Cartridges
- N95 Respirators
- Disposable Respirators
- Fit Test Kits
- PPE Care & Accessories
Frequently Asked Questions
How much does the GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and cost?
$32.47 at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and listing actually document?
The GVS SPR486 is a NIOSH-approved P100/multigas combination replacement filter for the GVS Elipse low-profile half-face respirator — integrating P100 particulate filtration (99.97% efficiency) with multigas chemical vapor protection in a single filter pair. The SPR486 fits both Small/Medium and Med…
What are the alternatives to the GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and?
The sibling respirator filter options linked in this review, ranked head-to-head in the respiratory protection guides below — start with the buyer's guides for the field view.
What do N95, P100, and the letter/number classes mean?
The letter is oil resistance (N=not, R=resistant, P=oil-proof); the number is filtration efficiency (95/99/100 ≈ 95%/99%/99.97%). The class on the listing is the class — higher isn't always better if breathing resistance parks the mask on the chin.
When does OSHA require fit testing for this equipment?
Any employer-required tight-fitting respirator — N95s included — needs fit testing before use and annually per 1910.134, plus user seal checks every wearing. Loose-fitting PAPRs are the exception.
How long do cartridges and filters last?
Chemical cartridges follow a change schedule (or end-of-service indicators) — odor breakthrough is a failure, not a signal. Particulate filters last until breathing resistance rises or damage/loading shows. The employer's change schedule is a 1910.134 requirement.
Can I pair any cartridge with any facepiece?
No — attachment systems are proprietary (bayonet counts and geometries differ by brand and series). Reviews here restate the compatibility each listing claims; the manufacturer's matrix governs.
What does a respirator NOT protect against?
Air-purifying respirators don't supply oxygen — oxygen-deficient atmospheres and IDLH conditions require supplied air. And a cartridge only stops what its class covers; the SDS names the contaminant to match.
Why does facial hair matter?
Anything between skin and seal defeats tight-fitting respirators — it fails fit tests and the standard. The options are shaving policy or loose-fitting PAPRs; there is no third answer.
How should respirators be cleaned and stored?
Per 1910.134 Appendix B-2: cleaned and sanitized (alcohol-free wipes between uses, periodic washing), stored away from contamination, sunlight, and distortion. Filters stay sealed until service.
What's the difference between a half mask and full face for the same cartridge?
Assigned protection factor (10 vs 50 for full face) and eye protection — the same cartridge protects longer lungs-wise on a full face because leakage is lower. Exposure levels pick the facepiece.
Are exhalation valves allowed?
For most industrial use, yes — valves ease breathing without lowering protection for the wearer. Sterile fields and source-control settings restrict them; that's a policy question, not a NIOSH one.
What is an assigned protection factor (APF)?
The exposure multiplier a respirator class is credited with under 1910.134 — half masks 10, full face 50, PAPR hoods 25-1000 by type. Exposure over PEL×APF means stepping up the class.
PAPR vs negative-pressure — when to step up?
Comfort over long shifts, beards, high exposures, and heat all point to PAPRs — blown air instead of pulled. The cost gap narrows once cartridge consumption and compliance are priced in.
Do respirators expire?
Filters and cartridges carry shelf lives sealed; facepiece elastomers age with use and cleaning chemistry. Date-check stock, rotate it, and let the fit test catch what inspection misses.
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and M/L does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates respiratory protection equipment for industrial and construction buyers.
How We Review
Respiratory reviews restate NIOSH approvals, filter classes, and compatibility exactly as listed — cartridge pairings follow the manufacturer's attachment rules (retainers where required, direct-attach where designed), and every tight-fitting respirator assumes the annual fit test our kits collection now sells. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Leave a comment