GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and M/L

The GVS SPR486 is a NIOSH-approved P100/multigas combination replacement filter for the GVS Elipse low-profile half-face respirator — integrating P100 particulate filtration (99.97% efficiency) with multigas chemical vapor protection in a single filter pair. The SPR486 fits both Small/Medium and Medium/Large Elipse facepiece sizes at per pair, and is the combination particulate-plus-multigas specification for Elipse users whose environments present simultaneous high-hazard particulate and broad-spectrum chemical vapor hazards. For the complete filter and cartridge selection, see the respirator filters and cartridges collection.

Read the full GVS Elipse SPR486 P100 Multigas Replacement Filters, S/M and M/L review →

gvs elipse spr486 p100 multigas replacement filters — what the listing actually specifies

Construction and Filtration

An air-purifying respirator filters air, it does not supply any. Under 29 CFR 1910.134 no air-purifying respirator may be worn in an atmosphere that is IDLH or oxygen-deficient (below 19.5% oxygen). Those conditions require a supplied-air respirator or an SCBA, and no filter or cartridge rating changes that.

The SPR486 combines P100 electrostatically charged particulate filter media with the multigas chemical sorbent used in GVS's Elipse Integra filter line. The P100 layer achieves 99.97% minimum efficiency against oil and non-oil-based aerosols, satisfying the highest NIOSH particulate filter class and the OSHA P100 mandate for lead, asbestos, cadmium, arsenic, and MDA regulated-carcinogen environments. The multigas sorbent provides chemical vapor protection across multiple gas classes within GVS's NIOSH approval scope — broader coverage than a standard single-category OV cartridge. The specific compounds covered must be verified against the site chemical inventory using GVS's NIOSH approval documentation before deployment. Both protection layers are integrated into the low-profile Elipse cartridge body, maintaining the respirator's safety glasses and over-mask equipment compatibility. The SPR486 fits both S/M and M/L Elipse facepiece sizes.

Compliance and Ratings

The GVS SPR486 is NIOSH-approved under 42 CFR Part 84 for P100 particulate filtration and the multigas chemical classes within its approval scope. The P100 component meets OSHA's P100 requirement for regulated carcinogens under the applicable substance-specific standards. The multigas chemical sorbent service life must be established from GVS's published service life data — chemical sorbent reaches breakthrough before P100 media saturates, making the chemical change-out schedule the governing replacement interval. OSHA 29 CFR 1910.134 fit testing, medical evaluation, and written respiratory protection program requirements apply. The SPR486 is compatible only with GVS Elipse respirators.

Performance Assessment

The SPR486 adds the P100 particulate layer to the multigas chemical protection of the SPR483 for environments where both hazard classes are simultaneously present. At versus the SPR483's, the per pair premium for P100 is warranted only when particulate exposure is confirmed by air monitoring — in chemical-vapor-only environments the SPR483 provides equivalent protection at lower cost and breathing resistance. The SPR486 sits near the SPR468 (OV/P100, in price; the selection between them depends on whether the chemical hazard is OV-specific (SPR468) or requires the broader multigas compound coverage class (SPR486). For Secure Click platform users requiring P100 plus broad chemical combination coverage, see the D80923.

Strengths

• P100 + multigas combination — 99.97% particulate filtration alongside broad-spectrum multigas chemical vapor protection in one filter pair
• P100 particulate — meets the highest NIOSH particulate standard; satisfies OSHA P100 requirement for lead, asbestos, cadmium, arsenic, and MDA environments
• Broader chemical coverage than OV/P100 — multigas scope extends beyond the standard OV category
• Dual-size fit — both S/M and M/L Elipse facepiece sizes; single SKU for multi-size programs
• available to order — immediate availability

Limitations

• Compound coverage verification required — multigas scope varies; confirm specific compounds and limits in GVS's NIOSH approval documentation before deployment
• Chemical sorbent governs change-out — multigas sorbent reaches breakthrough before P100 saturates; change-out based on GVS service life data, not breathing resistance
• Elipse platform only — not interchangeable with 3M Secure Click (see D80923), Gerson (see G73), or other platforms
• Higher breathing resistance than SPR483 — P100 media adds airflow resistance; relevant in high-exertion work
• Sold per pair — one purchase = two filter cartridges for one respirator

Recommended Use Cases

The GVS Elipse SPR486 is the correct specification for Elipse users in environments with confirmed simultaneous P100-class particulate and multigas chemical vapor hazards: industrial operations where broad-spectrum chemical vapor accompanies high-hazard particulate generation; maintenance operations in chemical facilities with both particulate and mixed chemical vapor. For multigas chemical vapor only, specify the SPR483. For OV and P100 with rated acid gas, specify the SPR474. For OV/P100 without the broader multigas requirement, specify the SPR468. For the complete filter and cartridge selection, see the respirator filters and cartridges collection.

Verdict

The GVS Elipse SPR486 delivers P100 particulate and multigas chemical vapor protection for the Elipse platform at per pair, fitting both S/M and M/L facepiece sizes. Correct when both high-hazard particulate and broad-spectrum chemical vapor are confirmed simultaneously present. For multigas-only, see the SPR483. For OV/AG/P100, see the SPR474. available to order. For the full filter and cartridge selection, see the respirator filters and cartridges collection.

What separates the models in this category is set out in 3m 2091 vs 2097 filter, 3m 2091 vs honeywell north 7580p100, 3m 6000 vs 6500 respirator.

Directly comparable options are grouped in 3m 6000 series full face mask respirator, 3m 60921 vs 60923 vs 60926 respirator cartridges, 3m 7800 series full face mask respirator.

Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.