GVS Elipse Spr483 Multigas Replacement Filters S M And M L Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The GVS Elipse SPR483 Multigas Replacement Filters, S/M and M/L is a respirator filter from GVS, listed on Amazon. This review restates what the product page documents, places it in its respiratory protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The GVS SPR483 is a NIOSH-approved multigas replacement filter for the GVS Elipse low-profile half-face respirator, providing chemical vapor protection against multiple gas classes in GVS's Elipse Integra filter format — without a P100 particulate layer. The SPR483 fits both Small/Medium and Medium/Large Elipse facepiece sizes at the listed price per pair — the lowest-cost option in the Elipse multigas filter lineup. For the complete filter and cartridge selection, see the respirator filters and cartridges collection .

The SPR483 uses activated carbon sorbent media formulated for multigas chemical vapor protection — covering a broader range of hazard classes than standard single-category OV or OV/AG cartridges. The specific compounds covered and their concentration limits are defined in GVS's NIOSH approval documentation; verify this against the site chemical inventory before deployment. The SPR483 does not include a P100 particulate filter layer; it provides chemical vapor protection only and does not filter particulate aerosols. For Elipse users requiring simultaneous P100 particulate protection alongside multigas coverage, the SPR486 (P100 + Multigas) is the correct specification. The filter body maintains the Elipse's low-profile geometry and fits both S/M and M/L Elipse facepiece sizes.

The GVS SPR483 is NIOSH-approved under 42 CFR Part 84 for the chemical hazard classes within its multigas approval scope. The SPR483 contains no P100 or particulate filter media and provides no protection against dust, mist, or aerosols at any particulate efficiency class. OSHA 29 CFR 1910.134 service life documentation requirements apply — change-out schedules must be established from GVS's published service life data for the specific compounds present. Fit testing, medical evaluation, and a written respiratory protection program are required before Elipse deployment. IN_STOCK_SCARCE at time of import — verify current availability before ordering for scheduled operations.

Where It Earns Its Slot

Where it earns its slot: The GVS SPR483 is a NIOSH-approved multigas replacement filter for the GVS Elipse low-profile half-face respirator, providing chemical vapor protection against multiple gas classes in GVS's Elipse Integra filter format —. Everything below measures the product against that role: its honest limits, its true alternatives, and where the linked guides rank it.

Honest Limits

Its limits are structural to the class: protection is capped by the assigned protection factor, ended by seal failure, and defined by the cartridge chemistry actually fitted. Facial hair defeats it, odor is not a change signal, and unlisted hazards are unprotected hazards.

Pros and Cons

Alternatives in the Same Lane

• 3M 6001 Organic Vapor Cartridge — 3M Bayonet Respirator Filt
• 3M 6002 Acid Gas Respirator Cartridge
• 3M 6003 Organic Vapor and Acid Gas Respirator Cartridge
• 3M 6004 Ammonia and Methylamine Respirator Cartridge
• 3M 6005 Formaldehyde and Organic Vapor Respirator Cartridge
• 3M 6006 Multi Gas and Vapor Respirator Cartridge
• 3M 2091 P100 Respirator Filter
• 3M 2096 P100 Respirator Filter Nuisance Acid Gas
• 3M 2097 P100 Respirator Filter Nuisance Organic Vapor

Respiratory Protection Guides

• When Do You Need a Respirator?
• Best Respirator for Welding Fumes
• OV vs OV/AG vs Multi-Gas Cartridges
• Best N95 for Construction
• Best Multi-Gas P100 Cartridge

Browse by Category

• Respiratory Protection
• Filters & Cartridges
• N95 Respirators
• Disposable Respirators
• Fit Test Kits
• PPE Care & Accessories

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the When Do You Need a Respirator? guide.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The GVS Elipse SPR483 Multigas Replacement Filters, S/M and M/L does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

What does the GVS Elipse SPR483 Multigas Replacement Filters, S/M and M/L listing actually document?

The GVS SPR483 is a NIOSH-approved multigas replacement filter for the GVS Elipse low-profile half-face respirator, providing chemical vapor protection against multiple gas classes in GVS's Elipse Integra filter format — without a P100 particulate layer. The SPR483 fits both Small/Medium and Medium/…

What are the alternatives to the GVS Elipse SPR483 Multigas Replacement Filters, S/M and M/L?

The sibling respirator filter options linked in this review, ranked head-to-head in the respiratory protection guides below — start with the buyer's guides for the field view.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Closely related on this site: co detector placement guide 2026, best 3m multi gas cartridge, gas detection complete guide, and ov vs ov ag vs multi gas cartridge guide.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.