FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tracking Rop Review (2026)

grab lanyard set, single leg with self-tracking rop review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tracking Rope Grab is a vertical lifelines & rope grabs from FallTech, listed. This review restates what the product page documents, places it in its fall protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

A rope grab lanyard is the connector half of a vertical lifeline setup — the piece between the rope and your harness — and the FallTech 8368 packages a self-tracking grab, a single-leg lanyard, and FallTech's ViewPack shock-absorbing pack into one assembly sized for 5/8 inch rope. It ships without the rope itself, so you pair it with a compatible lifeline you already own or are buying separately.

Shoppers searching a lanyard with rope grab already built rather than assembled piece by piece land here; a plain grab lanyard search for the connector half of the system finds the same set. Confirm your rope is 5/8 inch and you're ready to rig.

Any vertical rope-grab lifeline setup where you already have (or are separately buying) the rope and want a ready-built rope grab fall protection connector rather than sourcing a bare grab and lanyard individually. It sits in the vertical lifelines guide alongside the broader fall protection lanyards guide, forms the connector link in the fall protection equipment guide, sits in the lanyards & lifelines collection, and pairs with a harness from the FallTech 7015 contractor harness or the 7007 FT Basic.

Where It Earns Its Slot

Where it earns its slot: A rope grab lanyard is the connector half of a vertical lifeline setup — the piece between the rope and your harness — and the FallTech 8368 packages a self-tracking grab, a single-leg lanyard, and FallTech's ViewPack sh. The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

The limits are non-negotiable in this category: every component protects only within a complete, compatible system — anchor, harness, connector — and only below its rated capacity with the clearance the arrest math requires. Impact-loaded equipment retires immediately, and inspection is a use-by-use duty, not a schedule.

Pros and Cons

Alternatives in the Same Lane

• 3M DBI-SALA ExoFit X300 Comfort Vest Fall Arrest Harness — A
• 3M DBI-SALA ExoFit X100 Construction Positioning Harness — 3
• 3M DBI-SALA ExoFit X100 Comfort Vest Fall Protection Harness
• 3M DBI-SALA ExoFit X200 Comfort Vest Safety Harness — Padded
• 3M DBI-SALA ExoFit Harness X200 — Comfort Construction Posit
• 3M DBI-SALA Delta 1102000 Full Body Harness — Vest-Style, 42
• 3M Protecta First AB17540 Construction Harness — Back & Side
• 3M Protecta Harness (PRO 1191260) — 3 D-Ring Full Body Harne
• 3M Protecta Full Body Harness for Welders — 1191370 Hot Work

Fall Protection Guides

• Best Fall Protection Kits
• Best Vertical Lifelines & Rope Grabs
• Best Suspension Trauma Straps
• Best Carabiners & Connectors
• Construction Site PPE Guide

Browse by Category

• Fall Protection
• Lanyards & Lifelines
• Carabiners & Connectors
• Vertical Lifelines & Rope Grabs
• Tool Lanyards
• Hard Hats

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tracking Rop does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1926.501, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

How much does the FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tr cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tr listing actually document?

A rope grab lanyard is the connector half of a vertical lifeline setup — the piece between the rope and your harness — and the FallTech 8368 packages a self-tracking grab, a single-leg lanyard, and FallTech's ViewPack shock-absorbing pack into one assembly sized for 5/8 inch rope. It ships without t…

What are the alternatives to the FallTech 8368 Rope Grab Lanyard Set, Single Leg with Self-Tr?

The sibling vertical lifelines & rope grabs options linked in this review, ranked head-to-head in the fall protection guides below — start with the buyer's guides for the field view.