3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard Review (2026)

1340060 pro tie-back shock absorbing lanyard review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard is a lanyard from 3M, listed. This review restates what the product page documents, places it in its fall protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard is an OSHA 1926.502 and ANSI Z359.13 compliant shock absorbing lanyard from 3M's Protecta PRO Pack series — engineered for general construction, roofing, and elevated work where reliable fall arrest performance is required at a professional price point. The PRO Pack shock absorber is designed to limit maximum arresting force to well below the 1,800-lb OSHA limit (29 CFR 1926.502(d)(16)(iv)), protecting both the worker and the harness during an arrest event. Polyester webbing resists UV, abrasion, and jobsite chemicals.

Part number 1340060 ships in Red/Gray with a pre-deployment shock absorber pack. Connect the harness end to the dorsal D-ring of an ANSI Z359.11 full body harness and the anchor end to a certified anchor point rated for at least 5,000 lb per OSHA 1926.502(d)(15). Always calculate total fall clearance before work begins — factor in free fall, deceleration distance (~3.5 ft), D-ring height, and safety factor.

Both product lines are engineered by 3M but serve different price points. 3M DBI-SALA lanyards like the ShockWave2 and Force2 series feature premium forged hardware, larger gate clearances (up to 1.75 in.), and higher-grade webbing for demanding environments. The Protecta PRO Pack delivers equivalent OSHA/ANSI compliance at a lower cost — ideal for large crews, high-turnover job sites, or applications where lanyards are replaced frequently. Both lines meet the same ANSI Z359.13 performance standard.

Where It Earns Its Slot

The 1340060 exists for the jobsite problem its siblings cannot solve: no certified anchor connector within reach. Its integrated tie-back carabiners let a worker wrap the lanyard around a suitable structural member and clip it back to itself, forming a compliant connection where no dedicated anchor point exists — a capability the standard snap-hook models in this family simply do not have.

If your crew always works near installed anchors, the plainer PRO-Stop 1340220 costs less complexity for the same PRO Pack absorber; if the problem is moving between points, the PRO Twin-Leg 1340180 handles 100% tie-off; and if what bothers your workers is a dangling web underfoot, the PRO Stretch 1340141 retracts out of the way. The tie-back models — this one and the Tie-Back Adjustable 1342200 — are for sites where the anchor has to be improvised from structure.

Honest Limits

Tie-back use is only compliant with hardware rated for it — that is the whole reason the 1340060's carabiners exist, and it is also the boundary: wrapping an ordinary lanyard back on itself abrades the web and side-loads hooks that were never designed for it. The structure you wrap must itself meet anchorage requirements, and the web should be inspected at the wrap point for abrasion after every use.

Pros and Cons

Alternatives in the Same Lane

• 3M DBI-SALA ExoFit X300 Comfort Vest Fall Arrest Harness — A
• 3M DBI-SALA ExoFit X100 Construction Positioning Harness — 3
• 3M DBI-SALA ExoFit X100 Comfort Vest Fall Protection Harness
• 3M DBI-SALA ExoFit X200 Comfort Vest Safety Harness — Padded
• 3M DBI-SALA ExoFit Harness X200 — Comfort Construction Posit
• 3M DBI-SALA Delta 1102000 Full Body Harness — Vest-Style, 42
• 3M Protecta First AB17540 Construction Harness — Back & Side
• 3M Protecta Harness (PRO 1191260) — 3 D-Ring Full Body Harne
• 3M Protecta Full Body Harness for Welders — 1191370 Hot Work

Fall Protection Guides

• Best Fall Protection Kits
• Best Vertical Lifelines & Rope Grabs
• Best Suspension Trauma Straps
• Best Carabiners & Connectors
• Construction Site PPE Guide

Browse by Category

• Fall Protection
• Lanyards & Lifelines
• Carabiners & Connectors
• Vertical Lifelines & Rope Grabs
• Tool Lanyards
• Hard Hats

The Bottom Line

Rated 4.6/5. The 1340060 earns its slot as the family's answer to the missing-anchor problem: wrap, clip back, work. Where anchors are installed and reachable, its tie-back hardware is capability you are paying for but not using — pick the PRO-Stop or Stretch instead and let this one live in the gang box for the jobs that need it.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1926.501, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

Can any shock-absorbing lanyard be tied back around structure?

No — only models built for it, which is the 1340060's entire reason to exist. Wrapping an ordinary lanyard back on itself abrades the web and side-loads a snap hook that was never rated for that geometry. Tie-back models carry hardware designed and rated for the wrap-and-clip-back connection.

What can the 1340060 be wrapped around?

A structural member that itself meets anchorage requirements — the wrap does not lower the bar for what counts as an anchor. Avoid edges that can cut webbing, and inspect the web at the wrap point after every use, because that is where tie-back service concentrates wear.

How much clearance does a 6-ft shock-absorbing lanyard need?

More than most people guess: total fall distance includes the lanyard length, the absorber's deployment, harness stretch, and the worker's height below the D-ring, plus a safety margin. Run the numbers with the fall-clearance calculation guide before trusting any lanyard at height — at low heights an SRL is often the correct device instead.

When is the Twin-Leg the better choice than a tie-back model?

When the problem is moving between anchor points rather than creating one: the 1340180's two legs keep a worker connected through every transition. Tie-back models solve missing anchors; twin-legs solve movement. Different problems, different lanyards.

More questions on this topic

How much does the 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard listing actually document?

The 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard is an OSHA 1926.502 and ANSI Z359.13 compliant shock absorbing lanyard from 3M's Protecta PRO Pack series — engineered for general construction, roofing, and elevated work where reliable fall arrest performance is required at a professiona…

What are the alternatives to the 3M Protecta 1340060 PRO Tie-Back Shock Absorbing Lanyard?

The sibling lanyard options linked in this review, ranked head-to-head in the fall protection guides below — start with the buyer's guides for the field view.