3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lanyard — 6 f Review (2026)
shockwave 2 twin leg shock absorbing lanyard — 6 f review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.6/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | 3M DBI-SALA |
|---|---|
| Category | Lanyard |
| Model / SKU | 1244409 |
The 3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lanyard — 6 ft 100% Tie-Off, Rebar Hooks is a lanyard from 3M DBI-SALA, listed. This review restates what the product page documents, places it in its fall protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
The 3M DBI-SALA 1244409 ShockWave 2 is a 6 ft twin leg shock absorbing lanyard built for 100% tie-off. Its stretchable tubular polyester web expands to 6 ft under load and contracts to about 4½ ft as you move, so there is less slack to drag, snag, or trip over. Inside, an energy-absorbing core extends in a fall to limit the forces on your body, and a built-in impact indicator gives you a clear visual check afterward.
As a double leg lanyard it lets you stay clipped to at least one anchor at all times — a true 100% tie off lanyard. Buyers searching for a premium tie off lanyard or specifically the shockwave 2 lanyard are usually after exactly this: a light, stretchy twin-leg with 3M's self-locking hooks.
Crews moving across rebar, structural steel, and scaffolding who need to stay tied off through every step — steel erection, tower, bridge, and heavy construction. It is ranked in our fall protection lanyards guide, and it is the connecting-device stage of the ABC system explained in our fall protection equipment guide and the ABCDs of fall protection. Because it is a lanyard and not a reeled SRL, plan for full lanyard fall clearance below your feet.
Where It Earns Its Slot
Where it earns its slot: The 3M DBI-SALA 1244409 ShockWave 2 is a 6 ft twin leg shock absorbing lanyard built for 100% tie-off. Its stretchable tubular polyester web expands to 6 ft under load and contracts to about 4½ ft as you move, so there i. The sections below test that positioning against the documented configuration, not against wishful thinking.
Honest Limits
Its boundaries are structural: rated capacity covers the equipped worker, tools included; protection exists only inside a properly assembled system; and clearance, inspection, and retirement rules are what turn the label into an actual arrest. None of them are optional.
Pros and Cons
Pros
- Documented lanyard from 3M DBI-SALA
- Model 1244409 — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- 3M DBI-SALA ExoFit X300 Comfort Vest Fall Arrest Harness — A
- 3M DBI-SALA ExoFit X100 Construction Positioning Harness — 3
- 3M DBI-SALA ExoFit X100 Comfort Vest Fall Protection Harness
- 3M DBI-SALA ExoFit X200 Comfort Vest Safety Harness — Padded
- 3M DBI-SALA ExoFit Harness X200 — Comfort Construction Posit
- 3M DBI-SALA Delta 1102000 Full Body Harness — Vest-Style, 42
- 3M Protecta First AB17540 Construction Harness — Back & Side
- 3M Protecta Harness (PRO 1191260) — 3 D-Ring Full Body Harne
- 3M Protecta Full Body Harness for Welders — 1191370 Hot Work
Fall Protection Guides
- Best Fall Protection Kits
- Best Vertical Lifelines & Rope Grabs
- Best Suspension Trauma Straps
- Best Carabiners & Connectors
- Construction Site PPE Guide
Browse by Category
- Fall Protection
- Lanyards & Lifelines
- Carabiners & Connectors
- Vertical Lifelines & Rope Grabs
- Tool Lanyards
- Hard Hats
The Bottom Line
Rated 4.6/5 on documented spec, configuration, and value. The 3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lanyard — 6 f does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates fall protection equipment for industrial and construction buyers.
How We Review
Reviews in this family are grounded in the ABC system — Anchor, Body harness, Connector — and ANSI Z359-series ratings as stated on each listing. We restate only what the listing or product page documents; clearances, ratings, and compatibility always verify against the label and manufacturer instructions before use. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1926.501, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the 3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lan cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the 3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lan listing actually document?
The 3M DBI-SALA 1244409 ShockWave 2 is a 6 ft twin leg shock absorbing lanyard built for 100% tie-off. Its stretchable tubular polyester web expands to 6 ft under load and contracts to about 4½ ft as you move, so there is less slack to drag, snag, or trip over. Inside, an energy-absorbing core exten…
What are the alternatives to the 3M DBI-SALA 1244409 ShockWave 2 Twin Leg Shock Absorbing Lan?
The sibling lanyard options linked in this review, ranked head-to-head in the fall protection guides below — start with the buyer's guides for the field view.
Leave a comment