🔍 Click to zoom
Mechanix Wear M-Pact Impact Work Gloves — TPR Knuckle Guards
$12.79
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Mechanix Wear M-Pact, the TPR-guarded impact glove that bridges dexterity and armor. Editorial assessment by Steven Eaton, WC Safety editor, based on published Mecha...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the Mechanix Wear M-Pact, the TPR-guarded impact glove that bridges dexterity and armor.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Mechanix Wear specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Mechanix Wear specifications and category fit. We did not laboratory-test this product.
The Mechanix Wear M-Pact adds TPR knuckle and finger guards plus palm padding to the Mechanix formula — the mechanics glove for work where hands take hits: demolition, rigging, heavy equipment, and oil and gas. It bridges a dexterity glove and true impact protection, from the brand that created the category. You keep the thin synthetic palm for grip and tool feel, and gain back-of-hand armor for the knocks and pinches that a bare mechanics glove leaves exposed.
CHECK PRICE ON AMAZON → SHOP MECHANICS GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the Mechanix Wear M-Pact bridges dexterity and impact
A thin mechanics glove gives feel but no armor; a heavy rigger glove gives armor but no feel. The M-Pact threads that gap by molding TPR guards over the knuckles and fingers and padding the palm, all on the same dexterous synthetic chassis. That makes it the glove for demolition, rigging, heavy equipment, and oil-and-gas work where hands take real hits but still need to grip and control tools. As mechanics gloves go, this is the impact-bridge pick, and the best impact resistant gloves guide and ANSI/ISEA 138 standard guide explain how impact protection is measured. It is the step up from a bare glove when the job starts fighting back.
Safety first: the M-Pact's TPR guards add impact resistance, but the listing does not state a certified ANSI/ISEA 138 impact level, so treat it as impact-resistant knuckle protection rather than a rated impact glove. It is not rated to an ANSI cut level, so not a cut glove, and not rated against a chemical splash hazard or high heat. For a certified impact level choose a glove that publishes one, for blades a cut-rated glove, and for chemicals a chemical-resistant glove. Match the glove to your measured hazard with the cut-vs-impact guide.
What the Mechanix Wear M-Pact listing documents
From the published specs: TPR knuckle and finger guards; palm padding for shock absorption; the dexterous synthetic Mechanix palm; and a fit built for tool work with added armor. These are true impact resistant gloves and genuine tpr knuckle gloves — dexterous padded work gloves for high-impact tasks.
How the Mechanix Wear M-Pact compares to other impact gloves
For a value TPR alternative, the Ironclad EXO Motor Impact; for gloves that publish a certified level, the MCR FF2931 ForceFlex, MCR PD4903 Predator, or MCR PD4971 Predator; and the padded Ergodyne ProFlex 925FX. For thin dexterity without guards, the Mechanix Wear Original; for a reinforced synthetic utility glove, the Ironclad GUG; and for durable hide, the Wells Lamont Cowhide. Where cut protection matters, the Mechanix Pursuit D5, and the cut-resistant gloves guide covers levels.
Choosing the right glove for your hazard
Impact is one hazard; blades and chemicals are others. For cuts, the cut-resistant collection and complete cut-glove guide; for durable hide, the leather work gloves collection and leather gloves guide; for a dexterity comparison, the mechanics gloves guide; for hot work, the welding gloves collection; and the full hand protection collection spans cut, impact, chemical, and leather so you can match each glove to a measured risk and layer protection where a job needs more than one.
Where it fits by job and crew orders
The armored M-Pact suits demolition, rigging, heavy-equipment, oilfield, and construction crews whose hands take daily impacts — compare impact options with the impact gloves guide. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the Mechanix Wear M-Pact?
A mechanics glove that adds TPR knuckle and finger guards plus palm padding to the Mechanix formula. It is built for work where hands take hits - demolition, rigging, heavy equipment, and oil and gas - bridging a dexterity glove and true impact protection.
What is the impact protection?
Thermoplastic rubber (TPR) guards over the knuckles and fingers, plus padding across the palm, absorb and deflect back-of-hand knocks and pinches. It is impact-resistant knuckle and finger protection built onto a dexterous glove.
Does it have a certified ANSI/ISEA 138 impact level?
The listing does not state a certified ANSI/ISEA 138 level, so treat it as impact-resistant knuckle protection rather than a rated impact glove. If you need a specific certified level, confirm the rating or choose a glove that publishes an ANSI/ISEA 138 level.
What work is it for?
Demolition, rigging, heavy equipment, oil and gas, and construction - the tasks where back-of-hand impacts, pinches, and knocks are the daily hazard and a bare mechanics glove is not enough.
How does it differ from the Original?
The Original is a thin dexterity glove with no guards; the M-Pact adds TPR knuckle and finger armor and palm padding. Choose the Original for feel and the M-Pact where impacts are the risk.
Is it cut-resistant?
No - it is an impact-focused mechanics glove. It is not rated to an ANSI cut level unless the listing states one; for blade hazards, use a cut-rated glove instead.
Is it chemical- or heat-rated?
No - it is a padded impact glove for grip and knock protection. It is not rated against chemicals or for high heat; use a chemical-resistant or welding glove for those hazards.
How does it compare to a dedicated impact glove?
The M-Pact leans on dexterity with TPR guards added; dedicated impact gloves like the MCR ForceFlex or Ergodyne 925FX may publish a certified ANSI/ISEA 138 level. Compare on stated rating, coverage, and fit for your task.
Is it still dexterous with the guards?
Reasonably - the M-Pact keeps the thin synthetic palm for grip and tool feel while adding back-of-hand armor. It is bulkier than the Original but far more dexterous than a heavy rigger glove.
What sizes does it come in?
Size and color options for this listing are shown on the linked Amazon product page. A mechanics glove should fit snugly enough to control tools without binding at the fingers.
How do I care for it?
Most Mechanix gloves are machine washable - follow the care label and air-dry. Retire the glove once the palm wears through or the TPR guards crack or separate.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed Mechanix Wear M-Pact Impact Work Gloves review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
Mechanix Wear
Model / SKU
—
Product Type
Mechanics Gloves
Price
$12.79 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the Mechanix Wear M-Pact?
A mechanics glove that adds TPR knuckle and finger guards plus palm padding to the Mechanix formula. It is built for work where hands take hits - demolition, rigging, heavy equipment, and oil and gas - bridging a dexterity glove and true impact protection.
What is the impact protection?
Thermoplastic rubber (TPR) guards over the knuckles and fingers, plus padding across the palm, absorb and deflect back-of-hand knocks and pinches. It is impact-resistant knuckle and finger protection built onto a dexterous glove.
Does it have a certified ANSI/ISEA 138 impact level?
The listing does not state a certified ANSI/ISEA 138 level, so treat it as impact-resistant knuckle protection rather than a rated impact glove. If you need a specific certified level, confirm the rating or choose a glove that publishes an ANSI/ISEA 138 level.
What work is it for?
Demolition, rigging, heavy equipment, oil and gas, and construction - the tasks where back-of-hand impacts, pinches, and knocks are the daily hazard and a bare mechanics glove is not enough.
How does it differ from the Original?
The Original is a thin dexterity glove with no guards; the M-Pact adds TPR knuckle and finger armor and palm padding. Choose the Original for feel and the M-Pact where impacts are the risk.
Is it cut-resistant?
No - it is an impact-focused mechanics glove. It is not rated to an ANSI cut level unless the listing states one; for blade hazards, use a cut-rated glove instead.
Is it chemical- or heat-rated?
No - it is a padded impact glove for grip and knock protection. It is not rated against chemicals or for high heat; use a chemical-resistant or welding glove for those hazards.
How does it compare to a dedicated impact glove?
The M-Pact leans on dexterity with TPR guards added; dedicated impact gloves like the MCR ForceFlex or Ergodyne 925FX may publish a certified ANSI/ISEA 138 level. Compare on stated rating, coverage, and fit for your task.
Is it still dexterous with the guards?
Reasonably - the M-Pact keeps the thin synthetic palm for grip and tool feel while adding back-of-hand armor. It is bulkier than the Original but far more dexterous than a heavy rigger glove.
What sizes does it come in?
Size and color options for this listing are shown on the linked Amazon product page. A mechanics glove should fit snugly enough to control tools without binding at the fingers.
How do I care for it?
Most Mechanix gloves are machine washable - follow the care label and air-dry. Retire the glove once the palm wears through or the TPR guards crack or separate.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.