MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves

The MCR Safety 9188SFB-XS CutPro A4 Kevlar Sandy Nitrile Gloves in X-Small deliver ANSI/ISEA 105 Level A4 certified cut protection for workers with the smallest hand profiles — making true hand-hazard protection accessible to every member of a diverse industrial workforce. The 9188SFB-XS is built on the same 18-gauge black Kevlar shell and sandy nitrile foam palm coating as the rest of the CutPro series, precisely scaled for X-Small hands with palm circumferences typically under 7 inches. For safety programs committed to zero-compromise PPE fit, this SKU closes the final gap and ensures that no worker is left relying on an oversized glove that undermines the cut protection they depend on.

Key Features

• ANSI/ISEA 105 A4 Cut Resistance — Full A4-rated protection in the smallest size, with no reduction in certified performance relative to larger sizes
• 18-Gauge Black Kevlar Shell — Para-aramid fiber precisely knit for X-Small hand geometry, maintaining shell integrity and cut protection across the full palm and finger surface
• Sandy Nitrile Foam Coating — Textured palm-and-finger coating engineered for grip in dry, wet, and lightly oily conditions
• X-Small Specific Fit — Designed for palm circumferences typically under 7 inches; eliminates the bunching and folding that undermines cut protection in oversized gloves
• Seamless Knit Construction — No internal seams to cause pressure points or blisters during extended wear
• Touchscreen-Compatible Fingertips — Allows device operation without removing gloves in smart manufacturing environments
• Breathable Uncoated Back — Open knit dorsal maintains hand comfort and reduces sweat accumulation through long shifts
• Knit Wrist Cuff — Elastic retention keeps the glove properly positioned during dynamic work

Detailed Description

X-Small gloves are the most frequently under-stocked SKU in industrial PPE programs — and they are simultaneously the size with the most significant safety impact when absent. When workers with small hands are issued Medium or Large gloves because X-Small is out of stock or not ordered, the consequence is a glove that folds excessively at the fingers and palm, creating zones where the knit fibers are compressed rather than spread in their protective configuration. Those fold zones represent the lowest points of cut resistance on the glove surface, and they occur at exactly the areas — fingertips and palm base — where the hands most frequently contact sharp edges.

MCR Safety has engineered the 9188SFB-XS as a fully independent size, not a simple reduction of the Medium pattern. The knit machine settings, stitch count, and coating application are calibrated for X-Small hand geometry, producing a glove that fits cleanly from fingertip to wrist cuff with the same conforming fit that makes the rest of the CutPro series effective. The 18-gauge knit is particularly well-suited to X-Small sizing because the fine thread count maintains protective coverage even at smaller dimensions — coarser 13-gauge knit would have fewer fibers per square inch at the same small size, potentially reducing cut resistance.

The sandy nitrile foam palm coating on the 9188SFB-XS provides the same grip performance as the rest of the series. For workers with small hands, grip surface area is proportionally reduced compared to larger sizes, making every square centimeter of coating efficiency more important. Sandy nitrile's mechanical texture grip compensates for the smaller contact patch, ensuring confident part control during tasks that require precise grasp on small or smooth components.

From a program management perspective, the 9188SFB-XS rounds out the complete 9188SFB size run. Safety managers who stock XS through L in appropriate ratios can document a comprehensive, inclusive glove program that meets the spirit and letter of OSHA 1910.138 requirements for appropriate PPE selection — including the fit requirement that is increasingly interpreted as including size-appropriate options for all workers.

Applications and Use Cases

The 9188SFB-XS is appropriate in any setting where A4 cut protection is required and X-Small sizing is needed for one or more workers:

• Inclusive Industrial Programs — Facilities with female-majority assembly lines, youth apprentices, or mixed workforces where X-Small represents a meaningful portion of the sizing distribution
• Precision Assembly and Electronics — Fine work on small components, PCB handling, or instrument assembly where fingertip sensitivity is essential and finger bunching is intolerable
• Light Metal Fabrication — Bracket assembly, enclosure fitting, and trim work where A4 cut protection is required but gloves must conform closely to allow tool use
• Pharmaceutical Packaging — Where chemical compatibility is confirmed, X-Small is the correct fit for the large proportion of female workers in pharmaceutical manufacturing
• Jewelry and Watchmaking — Specialty applications involving small sharp-edged parts where both cut resistance and fine motor control are necessary
• Apprentice and Training Programs — Younger workers entering trades often require X-Small or Small sizing; stocking both ensures proper fit from day one

Specifications

Related Products

Build a complete PPE glove program with additional WC Safety offerings:

• Cut-Resistant Gloves — Full range of ANSI A1–A9 cut protection across brands, coatings, and materials
• Work Gloves — General-purpose and multi-hazard gloves for all trades and industries
• Safety Gloves — Chemical, impact, thermal, and vibration-resistant glove options
• Hand Protection — Complete hand safety catalog including sleeves and liners
• MCR Safety Products at WC Safety — Full MCR Safety PPE catalog