MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves Review (2026)
9188sfb cutpro a4 kevlar sandy nitrile gloves review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut-Resistant Gloves |
| Model / SKU | 9188SFB-XS |
The MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves is a cut-resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
The MCR Safety 9188SFB-XS CutPro A4 Kevlar Sandy Nitrile Gloves in X-Small deliver ANSI/ISEA 105 Level A4 certified cut protection for workers with the smallest hand profiles — making true hand-hazard protection accessible to every member of a diverse industrial workforce. The 9188SFB-XS is built on the same 18-gauge black Kevlar shell and sandy nitrile foam palm coating as the rest of the CutPro series, precisely scaled for X-Small hands with palm circumferences typically under 7 inches. For safety programs committed to zero-compromise PPE fit, this SKU closes the final gap and ensures that no worker is left relying on an oversized glove that undermines the cut protection they depend on.
X-Small gloves are the most frequently under-stocked SKU in industrial PPE programs — and they are simultaneously the size with the most significant safety impact when absent. When workers with small hands are issued Medium or Large gloves because X-Small is out of stock or not ordered, the consequence is a glove that folds excessively at the fingers and palm, creating zones where the knit fibers are compressed rather than spread in their protective configuration. Those fold zones represent the lowest points of cut resistance on the glove surface, and they occur at exactly the areas — fingertips and palm base — where the hands most frequently contact sharp edges.
MCR Safety has engineered the 9188SFB-XS as a fully independent size, not a simple reduction of the Medium pattern. The knit machine settings, stitch count, and coating application are calibrated for X-Small hand geometry, producing a glove that fits cleanly from fingertip to wrist cuff with the same conforming fit that makes the rest of the CutPro series effective. The 18-gauge knit is particularly well-suited to X-Small sizing because the fine thread count maintains protective coverage even at smaller dimensions — coarser 13-gauge knit would have fewer fibers per square inch at the same small size, potentially reducing cut resistance.
Where It Earns Its Slot
Where it earns its slot: The MCR Safety 9188SFB-XS CutPro A4 Kevlar Sandy Nitrile Gloves in X-Small deliver ANSI/ISEA 105 Level A4 certified cut protection for workers with the smallest hand profiles — making true hand-hazard protection accessib. The rest of this review holds the listing to exactly that brief — limits, alternatives, and the ranked guides included.
Honest Limits
The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.
Pros and Cons
Pros
- Documented cut-resistant gloves from MCR Safety
- Model 9188SFB-XS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves listing actually document?
The MCR Safety 9188SFB-XS CutPro A4 Kevlar Sandy Nitrile Gloves in X-Small deliver ANSI/ISEA 105 Level A4 certified cut protection for workers with the smallest hand profiles — making true hand-hazard protection accessible to every member of a diverse industrial workforce. The 9188SFB-XS is built on…
What are the alternatives to the MCR Safety 9188SFB CutPro A4 Kevlar Sandy Nitrile Gloves?
The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
Leave a comment