3M Secure Click D3071 P95 Particulate Respirator Filter

Read our hands-on 3M Secure Click D3071 review for field-tested buyer notes.

3M Secure Click D3071 Overview

The 3M Secure Click D3071 is a NIOSH-approved P95 particulate filter for the 3M Secure Click platform, capturing at least 95% of airborne particles — including oil-based mists and aerosols — and mounting with the Secure Click positive-lock push-to-connect system on 3M HF-800 and FF-800 respirators. It is a particulate-only filter with no gas or vapor protection, and it fits only the Secure Click platform.

At $11.99, the D3071 is the budget-tier P95 entry in the Secure Click particulate range. For P100 efficiency (silica, lead, asbestos), the Secure Click D3091 is the correct step up. For a single-pair P95 alternative, see the D3078. To understand the P95 vs P100 rating difference, read P100 vs N95 — which do you need, or browse the full 3M respirator filters and cartridges collection.

Where the D3071 Fits in Respirator Selection

Two checkpoints before ordering: confirm your respirator is a Secure Click HF-800 or FF-800, and confirm the hazard is particulate — not gas or vapor.

• Secure Click + P95 particulate, cost-sensitive → the D3071 is the right pick. For a detailed decision framework, see how to choose a respirator cartridge.
• Secure Click + P100 required (silica, lead, asbestos, hexavalent chromium) → the D3091 (P100). See best respirator for silica dust.
• Secure Click + P100 with nuisance acid gas relief → the D3096.
• Secure Click + P100 with nuisance OV relief → the D3097.
• Secure Click + N95 high-volume disposable → the 20-pack D7N11.
• 3M bayonet respirator instead → Secure Click filters will not fit; use a bayonet filter instead. Review the respirator filter types guide for a full overview.
• Gas or vapor also present → a Secure Click combination cartridge, not a filter. See the organic vapor vs P100 guide.

Who Should Buy the 3M Secure Click D3071?

Buy the D3071 if you run a 3M HF-800 or FF-800 Secure Click respirator, your hazard is particulate only, and you want the lowest-cost P95 Secure Click option on the site.

Choose a different filter if:

• Your substance-specific standard requires P100 (silica, lead, asbestos) → the D3091 (P100).
• You need P100 plus nuisance acid gas relief → the D3096.
• You need P100 plus nuisance OV relief → the D3097.
• You only need a single pair and prefer a labeled 1-pair pack → the D3078 (1 pair).
• You also need hard-shell P100 for bump and abrasion protection → the D9093 (hard-case P100).
• You run a 3M bayonet respirator → Secure Click filters are incompatible; browse all 3M filter options for the right bayonet filter.

What Does the D3071 Protect Against?

What the D3071 Does NOT Protect Against

• Organic vapor
• Acid gas
• Ammonia
• Formaldehyde
• Carbon monoxide
• Hydrogen fluoride
• Oxygen deficiency
• Unknown atmospheres
• IDLH conditions
• Silica / lead / asbestos (use P100)

Safety: The D3071 is a particulate filter only and provides no gas or vapor protection. No filter adds oxygen to the breathing air. It is designed exclusively for the 3M Secure Click platform — do not attempt to fit it on bayonet respirators. Oxygen-deficient, unknown-composition, and IDLH atmospheres require supplied-air respirators, SCBA, or another engineering control specified by a qualified safety professional. When OSHA substance-specific standards mandate P100 — for silica, lead, asbestos, hexavalent chromium — use the Secure Click D3091 (P100) instead.

Best Applications for the D3071

General Industrial Dust & Grinding Operations

The D3071 fits programs that run 3M HF-800 or FF-800 Secure Click respirators and need a cost-effective P95 filter for everyday dust and fume exposure — sanding, grinding, material handling, and general fabrication. The push-to-connect mount seates with an audible click, making filter changes fast on the shop floor.

Oil-Based Mist Environments (Metalworking)

Because the D3071 carries the "P" (oil-proof) NIOSH designation, it handles metalworking-fluid aerosol and oil-based mists that N-series filters are not rated for. See the respirator filter types guide for why oil resistance matters in metalworking environments.

General Welding Fume Particulate

For general welding fume at P95, the D3071 is a serviceable choice on Secure Click respirators. Review the best respirator for welding fumes guide to confirm whether your specific weld process requires P100 or a combination cartridge instead.

Secure Click Programs Standardized on HF-800 / FF-800

Programs that have already standardized on 3M HF-800 half-face or FF-800 full-face respirators benefit from the Secure Click platform's click-in mounting that speeds donning and doffing. Browse 3M half-face respirators or 3M full-face respirators if your program is not yet standardized.

3M Secure Click D3071 Pros & Cons

Compatible 3M Respirators

The D3071 uses the 3M Secure Click push-to-connect mount. It is compatible only with the Secure Click platform and is not interchangeable with standard 3M bayonet filters.

The D3071's Secure Click mount is incompatible with the standard 3M bayonet system used on 6000, 6500, 7500, 7800S, and FF-400 series respirators. Browse compatible respirators in the 3M half-face respirators and 3M full-face respirators collections.

D3071 vs Other 3M Secure Click Particulate Filters

D3071 vs D3091 — P95 vs P100

This is the most important purchase decision in the Secure Click particulate range. The D3071 is P95 (captures ≥95% of airborne particles); the D3091 is P100 (captures ≥99.97%). For routine dust and oil-mist work where no substance-specific OSHA standard mandates P100, the D3071 is sufficient and less expensive. When the job involves silica, lead, asbestos, or hexavalent chromium — all of which carry OSHA substance-specific standards — the D3091 is the required choice. Buy the D3071 for general P95 particulate; buy the D3091 whenever regulatory or hazard-assessment requirements call for P100. For more on the efficiency class difference, read P100 vs N95 — which do you need.

D3071 vs D3078 — Pack Format

Both the D3071 and the D3078 are Secure Click P95 filters. The primary difference is pack format and per-unit cost. The D3078 is sold as one pair, which suits users who need a single replacement; the D3071 is typically available in a pack configuration that drives down the per-pair cost for programs ordering in quantity. Compare current pack counts and pricing on both listings to confirm the best per-unit value before ordering.

D3071 vs D7P71 — Same Class, Different SKU

The D3071 and the D7P71 are both Secure Click P95 oil-proof particulate filters. The D3071 is priced lower ($11.99 vs the D7P71's higher list price). Unless your program specifies the D7P71 by part number, confirm the pack quantity on each listing and choose the option that gives you P95 Secure Click protection at the lower cost.

3M Secure Click D3071 Quick Answers

What is the 3M Secure Click D3071?

The 3M Secure Click D3071 is a NIOSH-approved P95 particulate respirator filter for the 3M Secure Click platform. It captures at least 95% of airborne particles, including oil-based mists and aerosols, and uses a push-to-connect Secure Click mount compatible with 3M HF-800 and FF-800 respirators only.

What respirators does the D3071 fit?

The D3071 fits only 3M Secure Click HF-800 half-face and FF-800 full-face respirators. It does not fit any standard 3M bayonet respirator, including the 6000, 6500QL, 7500, 7800S, and FF-400 series.

Is the D3071 a P95 or P100 filter?

The D3071 is a P95 filter, capturing at least 95% of airborne particles with an oil-proof (P) designation. For P100 efficiency (99.97%) on the Secure Click platform, use the D3091.

Does the D3071 protect against gases or vapors?

No. The D3071 is a particulate-only filter and provides zero gas or vapor protection. For organic vapor, acid gas, or other gas hazards on the Secure Click platform, a Secure Click combination cartridge is required.

Is the D3071 good for silica dust?

Not for OSHA-regulated silica exposure. OSHA's silica standard (1926.1153 / 1910.1053) requires controls that effectively mandate P100 filtration in many scenarios. Use the Secure Click D3091 (P100) for silica, lead, and asbestos work. The D3071 is suited for general dust and oil-mist where a P100 standard is not imposed.

Can the D3071 handle oil-based mists?

Yes. The "P" designation confirms it is oil-proof, meeting NIOSH's electrostatic-filter-degradation standard for oil-based aerosols. This makes it suitable for metalworking-fluid mist and other oil-laden environments that would degrade an N-series filter.

3M Secure Click D3071 Specifications

Helpful Buying Guides

• How to Choose a Respirator Cartridge
• Respirator Filter Types Explained
• P100 vs N95 — Which Do You Need?
• 3M Filter & Cartridge Guide
• Respirator Cartridge Color Chart
• Best Respirator for Silica Dust 2026
• Best Respirator for Welding Fumes
• Organic Vapor vs P100 — Selection Guide

3M Secure Click D3071 Frequently Asked Questions

What is the 3M Secure Click D3071 P95 filter used for?

The D3071 is used for P95 particulate protection against dusts, mists, and oil-based aerosols on 3M Secure Click HF-800 and FF-800 respirators. It suits general industrial dust, oil-mist metalworking, and welding fume work where no OSHA substance-specific standard mandates P100.

Does the D3071 fit 3M bayonet respirators?

No. The D3071 uses the Secure Click push-to-connect mount and is engineered exclusively for 3M HF-800 and FF-800 respirators. It will not attach to the standard bayonet systems on 3M 6000, 6500QL, 7500, 7800S, or FF-400 series masks.

Is the D3071 P95 or P100?

The D3071 is P95, capturing at least 95% of airborne particles per NIOSH 42 CFR Part 84, with an oil-proof ("P") designation. For P100 (99.97% efficiency) on the Secure Click platform, choose the D3091.

Is the D3071 rated for oil-based mists?

Yes. The "P" (oil-proof) designation means it meets NIOSH requirements for electrostatic filter degradation in oily aerosol environments, making it suitable for metalworking-fluid mist and similar oil-laden applications that N-series filters cannot handle.

Can I use the D3071 for silica, lead, or asbestos?

No — OSHA substance-specific standards for these hazards effectively require P100 filtration. Use the Secure Click D3091 (P100) for silica, lead, asbestos, and hexavalent chromium exposures, not the P95 D3071.

Does the D3071 protect against organic vapor or acid gas?

No. The D3071 is a particulate-only filter with no gas or vapor protection of any kind. If your work also involves organic vapor, acid gas, ammonia, or formaldehyde, you need a Secure Click combination cartridge, not a filter.

What is the difference between the D3071 and D3091?

Filtration efficiency: the D3071 is P95 (≥95% particle capture) and the D3091 is P100 (≥99.97%). Both are Secure Click particulate filters with no gas protection. Buy the D3071 for general P95 work; buy the D3091 when OSHA or your hazard assessment requires P100.

What is the difference between the D3071 and D3078?

Both are Secure Click P95 filters. The D3078 is sold as a labeled single pair, which suits individual-replacement purchases. The D3071 may offer a lower per-pair cost in its pack configuration. Compare current pack counts and prices on both listings to determine the better value for your quantity.

How many filters come in a D3071 pack?

The pack quantity for the D3071 is shown on the current product listing — confirm on the page before ordering, as packaging options may vary. The listing price of $11.99 reflects the current offering on Amazon.

When should I replace the D3071?

Replace the D3071 when it is physically damaged, visibly soiled, or noticeably harder to breathe through, or according to the replacement schedule in your employer's written respiratory protection program under OSHA 1910.134.

Can the D3071 be used on an FF-800 full-face respirator?

Yes. The FF-800 is a Secure Click full-face respirator and accepts all Secure Click D-series filters and cartridges, including the D3071. The push-to-connect mount is the same across both HF-800 and FF-800 respirators.

Is the D3071 good for welding fume?

The D3071 captures particulate welding fume at P95 efficiency. For processes where the specific fume type requires P100, choose the D3091. Consult the best respirator for welding fumes guide to confirm the correct class for your weld process.

Is the D3071 compatible with the 3M HF-801SD respirator?

The HF-801SD is a Secure Click half-face respirator in the HF-800 series. Secure Click D-series filters including the D3071 are designed for the HF-800 platform, so the D3071 should fit — confirm with 3M's compatibility documentation for your specific HF-800 variant before ordering.

WC Safety is an Amazon Associate. We may earn a commission on qualifying purchases at no additional cost to you. Pricing and availability are set by Amazon and may vary.