Uvex S39610C Stealth Safety Goggles, Clear Anti-Fog
EDITORIAL REVIEW: 4.5/5 WC Safety Review β Uvex S39610C Stealth Safety Goggles β Clear Uvextreme Anti-Fog Read the full Uvex S39610C Stealth Safety Goggles, Clear Anti-Fog review β Editorial assessment by Steven E...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Read the full Uvex S39610C Stealth Safety Goggles, Clear Anti-Fog review β
Editorial assessment by Steven Eaton, WC Safety editor, based on published Uvex specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON βSHOP EYE PROTECTION β
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
Uvex S39610C Stealth Safety Goggles, Clear Uvextreme Anti-Fog Sealed Goggle (Indirect Vent) Overview
Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.
The Uvex S39610C Stealth Safety Goggles deliver sealed, indirect-vent eye protection for industrial, laboratory, and jobsite environments where open-frame safety glasses leave gaps. Unlike spectacles, this is a sealed goggle: the soft body conforms to the face and creates a continuous barrier that helps block liquid splash, airborne dust, and flying particles from reaching the eyes.
The clear polycarbonate lens carries the factory Uvextreme anti-fog coating, and the goggle's indirect venting channels air through baffled ports so you get circulation against fogging without giving splash a straight path to the eye. The wraparound, low-profile shape sits close to the face, fits over many smaller prescription frames, and layers cleanly under a hard hat or alongside a respirator. The clear tint is the right choice for indoor and general-purpose work that demands full light transmission, the same selection logic covered in our lens color chart.
Built to the Z87.1 standard for impact-rated primary eye protection, the S39610C is a dependable pick when you need a sealed barrier rather than open glasses. Browse the full range of safety goggles or compare against other anti-fog safety glasses before you buy.
What It Is Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Liquid or chemical splash near the eyes | Strong fit | The sealed goggle body and indirect venting block splash that open glasses cannot. Confirm the splash-rating marking matches your task; see our Z87.1 standard explainer. |
| Dusty or particulate-heavy environments | Strong fit | A sealed seal keeps airborne dust out far better than open-frame glasses. Indirect vents reduce fogging while limiting dust ingress. |
| Wearing over prescription eyeglasses | Good fit (smaller frames) | The low-profile design fits over many smaller prescription frames. For a dedicated wide OTG goggle, see the Sellstrom S71100 OTG. |
| Indoor / general-purpose work | Strong fit | The clear lens gives maximum light transmission for indoor tasks. For bright outdoor glare, choose a gray or tinted lens instead. |
| Bright outdoor sunlight | Poor fit | The clear lens offers no glare reduction. Switch to gray/smoke tint from our tinted safety glasses for outdoor use. |
| Layering with a respirator or hard hat | Good fit | The low-profile wraparound seats under most hard hats and alongside half-mask respirators; verify your specific facepiece does not break the seal. |
Safety eyewear must meet ANSI/ISEA Z87.1-2020 and be matched to the hazard β Z87+ for high-impact work, the correct lens tint for the light, and a sealed safety goggle for chemical splash or fine dust where open-frame glasses leave gaps. Under OSHA 29 CFR 1910.133, employers must provide eye protection suited to the hazard. Replace any lens that is scratched or pitted, since surface damage weakens impact resistance. See our safety glasses buyer's guide.
Pros & Cons
- Sealed goggle body blocks splash and airborne dust that open-frame glasses let through
- Factory Uvextreme anti-fog coating on a clear polycarbonate lens
- Indirect venting promotes airflow against fogging without a straight splash path
- Low-profile wraparound fits over many smaller prescription frames
- Built to the ANSI/ISEA Z87.1 impact standard for primary eye protection
- Layers under hard hats and alongside respirators for full PPE stacks
- Clear lens has no glare reduction, not for bright outdoor sun
- Sealed designs run warmer and can still fog in extreme humidity without care
- Wide prescription frames may not fit, use a dedicated OTG goggle instead
- Anti-fog and lens coatings degrade with abrasive wiping, follow cleaning guidance
How It Compares
Within the Uvex Stealth and sealed-goggle family, the S39610C pairs the clear lens with the single-layer Uvextreme anti-fog coating. If you want a tougher dual-action coating, the Uvex S3960D Stealth with Dura-streme adds anti-scratch on the outside and anti-fog on the inside, the better choice for high-abrasion duty. For impact-and-splash work in a different sealed body, compare the 3M Centurion 452AF. If you specifically need to wear larger prescription glasses underneath, step up to the wide Sellstrom S71100 OTG goggle. For full selection help across sealed and open styles, see our safety glasses buyer's guide.
Specifications
| Form factor | Sealed safety goggle (not open-frame glasses) |
| Lens | Clear polycarbonate |
| Tint | Clear (indoor / general-purpose, maximum light transmission) |
| Anti-fog coating | Uvextreme anti-fog (factory-applied) |
| Venting | Indirect vent (airflow with splash/dust resistance) |
| OTG (over-the-glasses) | Fits over many smaller prescription frames; not a wide-frame OTG |
| Impact standard | Built to ANSI/ISEA Z87.1 (impact-rated primary eye protection) |
| Brand / model | Uvex (Honeywell) Stealth, S39610C |
| ASIN | B000BQUTQS |
Related Resources
safety glasses eye protection safety goggles anti-fog safety glasses clear lens safety glasses tinted safety glasses safety glasses buyer's guide best safety glasses anti-fog guide how to size safety glasses
More from our Safety Goggles reviews
If the decision is still open, the comparisons in amber vs clear lens safety glasses, anti fog vs anti scratch safety glasses, best face shields narrow it down.
Alternatives at the same protection level are listed in 3m safety glasses, 3m virtua safety glasses, bifocal safety glasses.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.