🔍 Click to zoom
MCR Safety PD2901 Predator Impact Gloves, Hi-Vis PU Palm (Tire-Tread TPR)
$17.88
Final price set by Amazon · may vary
Size: Small
EDITORIAL REVIEW: 4.5/5 WC Safety Review — the MCR Safety PD2901 Predator impact gloves Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did n...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — the MCR Safety PD2901 Predator impact gloves
Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP IMPACT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
MCR Safety PD2901 Predator Impact Gloves, Hi-Vis PU Palm (Tire-Tread TPR) Overview
The MCR Safety PD2901 Predator impact gloves are a hi-visibility lime mechanics glove built for impact and grip. A textured PU-coated synthetic leather palm holds in dry and oily conditions and resists abrasion, while a patented tire-tread TPR molded across the back of the hand and thumb provides impact protection. A reinforced thumb crotch, a spandex tire-tread back, and a hook-and-loop wrist closure with an ID panel round out the build.
As tire-tread TPR gloves, the Predator line's signature is that molded back-of-hand armor, and the PD2901 pairs it with a grippy PU-coated palm gloves surface developed for oil and gas. As hi-vis mechanics gloves they stay visible on a busy site, and MCR rates the tire-tread back at ANSI/ISEA 138 Level 1, making these a practical pair of Level 1 impact gloves for general handling.
Like any item in impact-resistant gloves, match the glove to the hazard. This is an impact-and-abrasion glove with no engineered cut-resistant liner, so it should not be used for cut hazards — choose a cut-resistant glove for those, and the PD2903 adds a D3O padded leather palm for more impact. Confirm the size on this listing and the impact level on MCR's datasheet; it is not chemical or heat PPE. Compare this mechanics glove against other tiers in our guides, and browse material-handling gloves before ordering.
What These Predator Gloves Are Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| General material handling with impact risk | Purpose-built | Tire-tread TPR back covers back-of-hand impact; grippy PU palm. |
| Oil and gas, dry and oily grip | Strong | The PU-coated synthetic palm was developed for slick conditions. |
| High-visibility job sites | Strong | Hi-vis lime keeps hands visible; ID panel supports crew use. |
| Heavier impact exposure | Step up | Level 1 back; the D3O-padded PD2903 adds palm impact absorption. |
| Cut, chemical, or heat hazards | Not suitable | No cut liner; use cut-, chemical-, or heat-rated gloves as needed. |
Hand protection has to match the specific hazard. These are impact and abrasion mechanics gloves — a tire-tread TPR back for struck-by, pinch, and bump hazards — and the PD2901 has no engineered cut-resistant liner, so it should not be used for cut hazards; it is also not rated for chemicals, so for a chemical splash hazard use chemical-resistant gloves selected for the substance, and use heat-rated gloves for hot work. Confirm the ANSI/ISEA 138 impact level against your task, size the glove correctly so the TPR sits over the back of the hand, inspect the palm coating, TPR, thumb crotch, and seams before each use, and replace the gloves once any part is worn, cracked, or detached. Compare tiers in cut vs impact gloves and the ANSI/ISEA 138 impact standard.
Pros & Cons
Pros
- Patented tire-tread TPR back for impact protection
- Textured PU-coated synthetic palm grips in dry and oily conditions
- Hi-vis lime for visibility; ID panel for crew use
- Reinforced thumb crotch for durability
- Hook-and-loop wrist closure for adjustable fit
Cons
- No cut-resistant liner — not for cut hazards
- Level 1 impact — step up to a D3O-padded model for heavier impact
- Not chemical- or heat-rated
- Confirm the size on this listing before ordering
How It Compares
The PD2901 is the base tire-tread Predator; padded models add more. Weigh them before ordering:
| Model | Palm | Palm padding | Best for |
|---|---|---|---|
| PD2901 (this page) | PU-coated synthetic | None | Impact and grip, general handling |
| PD2903 | Cow grain leather | D3O foam padded | More palm impact absorption |
| Cut-lined mechanics glove | HPPE or Dyneema | Varies | Adds cut protection |
Choose the PD2901 for a grippy tire-tread impact glove, the PD2903 for a D3O-padded leather palm, or a cut-lined glove if you need cut protection. Compare in our best impact-resistant gloves guide and the wider impact glove range.
Specifications
| Brand | MCR Safety (Predator) |
| Model / Part Number | PD2901 (confirm size for this listing) |
| Type | Mechanics impact glove (no cut liner) |
| Palm | Textured PU-coated synthetic leather; hi-vis lime |
| Back / Impact | Patented tire-tread TPR back and thumb; ANSI/ISEA 138 Level 1 (per datasheet) |
| Features | Reinforced thumb crotch; spandex back; hook-and-loop closure with ID panel |
| Cut | No engineered cut liner (PD2903 adds a D3O padded leather palm) |
Related Guides
best impact-resistant gloves, nitrile vs PU coated gloves, cut vs impact gloves, ANSI/ISEA 138 impact standard, best cut-resistant gloves.
Related Resources
impact-resistant gloves mechanics gloves cut-resistant gloves material-handling gloves
Frequently Asked Questions
What protection does the MCR PD2901 offer?
Impact and abrasion: a patented tire-tread TPR molded across the back of the hand and thumb gives back-of-hand impact protection, and a PU-coated synthetic leather palm adds grip and abrasion resistance. It does not have an engineered cut-resistant liner.
What impact level does the PD2901 carry?
MCR rates the Predator tire-tread TPR back at ANSI/ISEA 138 Level 1 impact, the entry impact tier. Level 1 suits general material handling; for heavier impact exposure step up to a Level 2 glove such as a D3O-padded Predator. Confirm the level on MCR's datasheet.
Does the PD2901 have a cut-resistant liner?
No. The PD2901 has a PU-coated synthetic leather palm for grip and abrasion, but no engineered cut-resistant liner, so it should not be relied on for cut hazards. For cut protection, choose a cut-rated glove with an HPPE or Dyneema liner.
What is the palm made of?
A textured PU-coated synthetic leather palm, chosen for grip in dry and oily conditions and for abrasion resistance and consistency when wet. It was developed with oil and gas work in mind. Synthetic leather also holds up better than untreated leather when it gets wet.
What is the tire-tread TPR back for?
The patented tire-tread-pattern TPR is molded across the back of the hand and thumb to guard against impact, pinch points, and struck-by hazards. It is the glove's main protective feature and gives the Predator line its distinctive look.
What is the ID panel and closure?
A hook-and-loop wrist closure adjusts the fit and secures the glove, and an ID panel lets a worker write their initials so gloves are not mixed up in shared or crew settings. This supports hygiene and inventory control.
Why the reinforced thumb crotch?
The thumb crotch is a high-stress, high-wear area where gloves often fail first. The PD2901 reinforces it for extra durability, extending the useful life of the glove during repetitive gripping tasks.
What size is this listing?
MCR Safety offers the PD2901 in several sizes as separate part numbers; confirm the size on this listing before ordering. A correct fit matters for dexterity and for the TPR to sit over the back of the hand as intended, so measure your hand.
Can I use these gloves for chemical handling?
No. These are impact and abrasion mechanics gloves, not chemical protection. For chemical exposure, use chemical-resistant gloves rated for the specific substance. Match the glove to the actual hazard.
How is the PD2901 different from the PD2903?
Both are Predator gloves with a tire-tread TPR back. The PD2901 has a PU-coated synthetic palm and no palm padding, while the PD2903 adds a premium cow grain leather palm with a D3O foam-padded palm for more impact absorption. Choose the PD2903 for added palm impact.
How do I care for the PD2901?
Follow MCR's care guidance; many synthetic mechanics gloves can be gently hand washed and air dried. Keep them away from direct high heat. Inspect the palm coating, tire-tread TPR, thumb crotch, and seams for wear, and replace the gloves when protection is compromised.
When should I replace the PD2901?
Replace them when the palm coating wears smooth or tears, the tire-tread TPR cracks or detaches, the thumb crotch fails, the closure stops holding, or the seams give way. Damaged gloves no longer deliver their rated impact and abrasion protection.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from MCR Safety published data. Compare the range in impact-resistant gloves.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the product to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
PD2901S
Product Type
Impact-Resistant Gloves
Condition
New
MPN
MCR Safety PD2901L
Price
$17.88 (Amazon)
Rating
4.4 / 5 — 5 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.0 / 5· 19 ratings on Amazon
★★☆☆☆
6 weeks
Gloves are comfortable and and fit well just aren’t durable only lasted about 6 weeks
Verified Purchaser · December 1 · ✓ Amazon Verified Purchase
★★★★★
Fantastic!
I'm an arborist and my job is very brutal to any glove I've ever worn. Wether it be running ropes, hauling brush or climbing trees for hours on end. My job is a glove killer! These predator gloves are GREAT!! I'm easily able to use ropes, tie knots and even handle my saw at ease. They hold up super well and are very comfortable. They seem very well built and very worker oriented. A big plus is the hi-Vis as well! I will buy again!!!
Verified Purchaser · May 18, 20 · ✓ Amazon Verified Purchase
★★★★★
Great work glove!
My husband loves these gloves and uses them for work. He says they're the only ones that won't get a hole in the palm right away.
Verified Purchaser · December 1 · ✓ Amazon Verified Purchase
★★★★★
Really good quality
One of the best gloves i have orderd so far really good grip on the palm and fingers good rubber impact protection on the back of the hand
Verified Purchaser · July 11, 2 · ✓ Amazon Verified Purchase
★★★★★
Awesome gloves
These are the best impact gloves I’ve ever used or found, hands down (pun intended)
Verified Purchaser · January 4, · ✓ Amazon Verified Purchase
Showing 5 of 19 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.