🔍 Click to zoom
MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-Coated)
Size: X-Small
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves
Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.
CHECK PRICE ON AMAZON →SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-Coated) Overview
The MCR Safety 92785NF CutPro is a 13-gauge, ANSI/ISEA 105 level A5 cut-resistant glove built for sustained metal, glass, and sheet-stock handling where bare-hand or low-cut gloves leave too much exposure. The seamless HyperMax engineered-yarn liner carries the A5 rating across the palm and fingers, while a nitrile-foam palm coating adds abrasion resistance and a textured grip that holds in dry conditions and light-oil contact without sacrificing dexterity. The uncoated knit back keeps the hand breathable during long shifts. If you are weighing cut levels before you buy, our guide to how to choose cut-resistant gloves by ANSI level and the breakdown of ANSI/ISEA 105 cut levels explained walk through where A5 fits between everyday A2-A3 utility gloves and high-exposure A8-A9 work.
This 92785NF sits in the broader WC Safety range of cut-resistant gloves and pairs naturally with general material-handling gloves for mixed-task crews. The nitrile-foam palm makes it a practical pick among palm-coated nitrile gloves for assembly, fabrication, and parts handling. Note this is an industrial cut glove, not a disposable exam or food-contact glove.
What MCR Safety Is Built For
| Task | Fit | Buyer guidance |
|---|---|---|
| Sheet-metal and glass handling | Excellent | A5 liner is rated for sustained edge contact; primary use case for this glove. |
| Parts assembly and fabrication | Excellent | 13-gauge liner keeps fingertip dexterity for fasteners and small components. |
| Dry and light-oil parts handling | Good | Nitrile-foam palm grips dry stock and tolerates light oil; not for heavy oil immersion. |
| General warehouse and material handling | Good | Breathable knit back suits all-day wear; consider lower-cost A2-A3 for low-cut tasks. |
| Chemical or solvent immersion | Not suitable | Palm-coated knit, not a chemical barrier; use chemical-resistant gloves instead. |
| High-heat or welding work | Not suitable | No thermal rating; use heat-resistant gloves for hot-surface contact. |
Cut and impact gloves reduce injury risk but do not make a task safe. Match the ANSI/ISEA 105 cut level (A1–A9) and ANSI/ISEA 138 impact level to the real hazard, inspect each pair for wear before use, and follow your site's hand-protection program. No glove is cut-proof or puncture-proof — keep hands clear of moving blades and pinch points. See ANSI/ISEA 105 cut levels explained.
Pros & Cons
Pros
- ANSI/ISEA A5 cut rating from a seamless HyperMax engineered-yarn liner
- Nitrile-foam palm coating for dependable dry and light-oil grip
- 13-gauge knit keeps fingertip dexterity for assembly and detail work
- Breathable uncoated knit back for all-day comfort
- Available across a full XS-XL size run for a proper fit
Cons
- Palm coating only - not a chemical or liquid barrier
- No impact (ANSI/ISEA 138) or heat rating
- Light-oil grip only; not suited to heavy-oil or immersed handling
How It Compares
Within the CutPro line, the 92785NF holds an A5 cut rating - a step below the A8 high-cut Predator options and well below A9 needle-resist gloves, but with more dexterity and lower cost than those heavy-exposure models. Against MCR's leather-palm A5 Predator and the impact-rated impact-resistant gloves range, the 92785NF trades back-of-hand impact protection for a lighter, more breathable knit better suited to detail handling. For lower-cut everyday tasks, an A2-A3 utility glove like the Ergodyne ProFlex 7021 A3 costs less; step up only to A5 when edge exposure justifies it.
Specifications
| Material | HyperMax engineered-yarn seamless knit liner |
| Cut Level | ANSI/ISEA 105 Level A5 |
| Coating | Nitrile-foam palm coating |
| Gauge | 13-gauge |
| Back of Hand | Uncoated breathable knit |
| Sizing | XS-XL |
| Color | Gray liner with black/gray nitrile palm |
| Model | MCR Safety 92785NF (CutPro) |
Related Glove Resources
cut-resistant gloves impact-resistant gloves material-handling gloves chemical-resistant gloves heat-resistant gloves nitrile gloves how to choose cut-resistant gloves by ANSI level ANSI/ISEA 105 cut levels explained nitrile gloves guide EN 388 glove standard explained
Frequently Asked Questions
What cut level is the MCR 92785NF?
It is rated ANSI/ISEA 105 level A5, meaning the liner withstands a high degree of blade-edge contact - suitable for sustained metal, glass, and sheet-stock handling. See our ANSI/ISEA 105 cut levels explained guide for where A5 fits.
Is the 92785NF coated, and what kind of coating?
Yes. It has a nitrile-foam coating on the palm and fingers for abrasion resistance and grip. The back of the hand is left as breathable uncoated knit.
Will these gloves grip oily parts?
The nitrile-foam palm grips well on dry stock and tolerates light-oil contact. For heavy oil or immersed handling, choose a fully coated or nitrile-dipped glove instead - browse our nitrile gloves for those options.
Are these gloves food-safe or medical-grade?
No. The 92785NF is an industrial cut-resistant work glove, not a food-contact or medical exam glove. Do not use it for food handling or medical applications.
What sizes does the 92785NF come in?
The CutPro 92785NF is offered in a full XS through XL run. Measure across your palm and check our glove size chart to pick the right fit before ordering.
Are these gloves chemical-resistant?
No. The palm coating adds grip and abrasion resistance but is not a chemical barrier. For solvent or chemical exposure, use dedicated chemical-resistant gloves.
Do these gloves have impact protection?
No. The 92785NF carries a cut rating only, with no ANSI/ISEA 138 impact rating. If you need back-of-hand impact protection, see our impact-resistant gloves and the ANSI/ISEA 138 reference.
How does A5 compare to lower cut levels?
A5 offers substantially more cut protection than common A2-A3 utility gloves, aimed at higher edge exposure. Our how to choose cut-resistant gloves by ANSI level guide explains when to step up from A3 to A5.
What is the glove made of?
The liner is a seamless 13-gauge HyperMax engineered yarn that carries the A5 cut rating, finished with a nitrile-foam palm coating. The blend keeps the glove flexible for detail work.
Can I machine wash these gloves?
Coated cut-resistant knits can generally be laundered, but follow the manufacturer's care guidance. Coating performance and grip degrade over repeated wash cycles, so inspect for wear before reuse.
Does the EN 388 standard apply to these gloves?
MCR rates the 92785NF on the ANSI/ISEA 105 A-scale (A5). EN 388 is the European cut and abrasion standard; our EN 388 glove standard explained reference shows how the two scales relate if you are cross-referencing.
How is the 92785NF different from other MCR CutPro and Predator gloves?
The 92785NF is a lighter A5 nitrile-foam knit built for dexterity. Higher-exposure jobs may call for an A8-A9 or leather-palm Predator, while impact tasks need an impact-rated model - compare across our cut-resistant gloves collection.
Written by Steven Eaton, WC Safety Editorial — hand-protection desk. Specifications sourced from MCR Safety published data. Compare the range in cut-resistant gloves.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the glove to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
92785NF-XS
Product Type
Cut-Resistant Gloves
Condition
New
MPN
92785NF-XS
Rating
4.5 / 5 — 2 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★★4.6 / 5· 4 ratings on Amazon
★★★★★
None
True to the size. Fits good
Verified Purchaser · November 1 · ✓ Amazon Verified Purchase
★★★★☆
Too small
Gloves were too small need a larger size
Verified Purchaser · September · ✓ Amazon Verified Purchase
Showing 2 of 4 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.