MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-Coated) Review (2026)
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut-Resistant Gloves |
| Model / SKU | 92785NF-XS |
The MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-Coated) is a cut-resistant gloves from MCR Safety, listed at $13.99. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure .
The MCR Safety 92785NF CutPro is a 13-gauge, ANSI/ISEA 105 level A5 cut-resistant glove built for sustained metal, glass, and sheet-stock handling where bare-hand or low-cut gloves leave too much exposure. The seamless HyperMax engineered-yarn liner carries the A5 rating across the palm and fingers, while a nitrile-foam palm coating adds abrasion resistance and a textured grip that holds in dry conditions and light-oil contact without sacrificing dexterity. The uncoated knit back keeps the hand breathable during long shifts. If you are weighing cut levels before you buy, our guide to how to choose cut-resistant gloves by ANSI level and the breakdown of ANSI/ISEA 105 cut levels explained walk through where A5 fits between everyday A2-A3 utility gloves and high-exposure A8-A9 work.
Where It Earns Its Slot
Where it earns its slot: Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.. The sections below test that positioning against the documented configuration, not against wishful thinking.
Honest Limits
The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.
Pros and Cons
Pros
- Documented cut-resistant gloves from MCR Safety
- Model 92785NF-XS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
Frequently Asked Questions
General questions about ratings, OSHA limits and fit are answered in the Cut-Resistant Gloves Complete Guide guide.
How much does the MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-C cost?
$13.99 at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-C listing actually document?
Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.…
What are the alternatives to the MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-C?
The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 92785NF CutPro A5 Cut-Resistant Gloves (Nitrile-Coated) does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Leave a comment