What is the cut resistance level of the Ergodyne 7401 ProFlex Coated Lightweight Winter Work Gloves?

These gloves are rated to an ANSI/ISEA 105 cut level rated for the application described in the product title. Refer to the product listing for the specific ANSI cut rating. Always select a cut level appropriate to the specific hazard — higher ratings are not always required and can reduce dexterity.

What is the ANSI/ISEA 105 cut level rating system?

ANSI/ISEA 105 rates cut resistance from A1 (lightest, 200g blade force) to A9 (highest, 6,000g+). The rating is determined by a TDM-100 or CPPT test measuring the blade force required to cut through the glove material. Higher numbers = higher cut resistance.

What is the a coated coating on these gloves for?

The a coated coating provides grip on wet, oily, and dry surfaces, improves dexterity for handling parts, and protects the palm and fingers from minor abrasion.

Are Ergodyne cut-resistant gloves machine washable?

Most cut-resistant gloves with synthetic liners (HPPE, Dyneema, Spectra) can be machine washed in cold water on a gentle cycle. Air dry — do not tumble dry or use heat. Check the glove's care label. Replace if the liner loses structural integrity or the coating shows significant wear.

What industries use cut-resistant gloves?

Cut-resistant gloves are used in metal fabrication, glass handling, automotive assembly, packaging, food processing, construction, warehousing, and any application involving sharp edges, blades, or abrasive materials. OSHA 29 CFR 1910.138 (PPE for hands) requires hand protection when hazards are present.

How do I choose the right cut level?

Match the cut level to your specific hazard. Conduct a hand injury risk assessment: identify the sharpest material handled, the pressure applied, and the frequency of exposure. ANSI A1-A3 for light hazards, A4-A6 for medium, A7-A9 for severe. Avoid over-specifying — heavier cut protection often reduces grip and dexterity.

What sizes are available for Ergodyne cut-resistant gloves?

Cut-resistant gloves are typically available in sizes XS through 3XL. Measure around the widest part of your hand (excluding the thumb) in inches — this corresponds to glove size. Refer to the specific product size chart as sizing can vary by model.

Do cut-resistant gloves protect against punctures?

Cut resistance and puncture resistance are separate properties. ANSI/ISEA 105 tests both independently. A high cut-level glove may not have high puncture resistance. Check both ratings on the glove label when working with needles, wire, or pointed objects.

Do cut-resistant gloves protect against chemicals?

Standard cut-resistant gloves are not designed for chemical protection unless specifically rated. The ANSI/ISEA 105 standard includes chemical resistance ratings separately from cut resistance. For chemical hazards, use gloves rated for the specific chemical per OSHA 29 CFR 1910.138 and the relevant SDS.

Ergodyne ProFlex 7401 Latex Coated Winter Work Gloves

🔍 Click to zoom

View on Amazon

Ergodyne ProFlex 7401 Latex Coated Winter Work Gloves

Name: Ergodyne ProFlex 7401 Latex Coated Winter Work Gloves
Brand: Ergodyne
SKU: 7401-L
Price: 6.45 USD
Availability: InStock

Ergodyne SKU: 7401-L Safety Gloves GTIN: 0720476176244

★ ★ ★ ★ ★ 4.8 (12596 Amazon ratings)

$5.63

Final price set by Amazon · may vary

Size: Large

Ergodyne ProFlex 7401 Latex Coated Winter Work Gloves The Ergodyne ProFlex 7401 is a latex-coated winter work glove for cold-environment operations requiring grip retention in wet and muddy conditions. Latex coating p...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.

Curated SelectionExpert-chosen safety gear

Independently ReviewedUnbiased assessments — no manufacturer input

Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.

Cut Resistant Ergodyne Latex Coated Orange ProFlex Safety Gloves Winter Gloves Work Gloves

Ergodyne ProFlex 7401 Latex Coated Winter Work Gloves

The Ergodyne ProFlex 7401 is a latex-coated winter work glove for cold-environment operations requiring grip retention in wet and muddy conditions. Latex coating provides superior wet grip compared to nitrile or PU alternatives, making the 7401 well suited for construction, landscaping, and outdoor industrial work in cold, wet weather. An insulated liner provides warmth during winter operations while the orange color improves glove visibility on outdoor job sites. The latex palm and fingers deliver tactile feedback and a secure grip on tools and materials in adverse conditions.

Key Features

Latex Palm Coating — Superior wet-grip performance compared to nitrile or PU coatings; maintains reliable tool and material grip in rain, mud, and cold conditions.
Insulated Liner — Thermal insulation provides warmth for outdoor winter construction, landscaping, and cold infrastructure work.
Orange Color — High-visibility orange improves glove and hand detection on outdoor job sites and roadside work environments.
Cut Resistant Construction — Cut-resistant liner provides basic protection from sharp materials encountered in outdoor work environments.

Compliance

Meets ANSI/ISEA 105 cut resistance. Suitable for outdoor construction, landscaping, infrastructure maintenance, and cold-weather material handling requiring wet-grip performance.